Sony HDC1500 Series Operation Manual page 17
Hd color camera
Hide thumbs
Also See for HDC1500 Series:
- Operation manual (62 pages) ,
- Maintenance manual (550 pages) ,
- Maintenance manual (144 pages)
Table of Contents
Advertisement
Operation panel
SY type:
For UC/SYL/JN3 (USA, Canada, and other countries) and JN4 (East Asia) models (for NTSC areas)
For details on the differences among models, see "Overview" on page 60.
a INTERCOM1 and INTERCOM2 controls and switches
PGM1 control
PGM1
PGM2
LEVEL
MIC
INCOM
REAR
ON
FRONT
OFF
INTERCOM 1
INCOM level control
LEVEL/MIC switch
a INTERCOM1 and INTERCOM2 controls and
switches
There are PGM1 and 2 controls incorporated with a line
select switch, a LEVEL/MIC switch, and INCOM level
control each for intercom line 1 and 2.
PGM1 (program 1) control
Adjust the audio reception level of program 1.
PGM2 (program 2) control
Adjust the audio reception level of program 2.
LEVEL/MIC switch
REAR/ON: The intercom headset microphone is turned
on. The intercom audio reception level is adjusted with
the INCOM level control.
REAR/OFF: The intercom headset microphone is turned
off. The intercom audio reception level is adjusted with
the INCOM level control.
FRONT/OFF: The intercom headset microphone is
turned off. The intercom audio reception level is
adjusted with the INTERCOM LEVEL control on the
front of the camera.
INCOM level control
Adjust the intercom audio reception level.
Line select switch
Select the intercom line.
PROD: Producer line
72
Locations and Functions of Parts
PGM2 control
PGM1
PGM2
LEVEL
MIC
PROD
PROD
INCOM
REAR
ON
ENG
FRONT
OFF
ENG
INTERCOM 2
Line select switch
b RET 1 button and select switch
c RET 2 button and select switch
RET1
2
3
RET2
1
4
PGM1
PGM2
PGM1
LEVEL
MIC
LEVEL
MIC
PROD
INCOM
REAR
ON
REAR
FRONT
OFF
ENG
FRONT
OFF
INTERCOM 1
INTERCOM 2
ENG: Engineer line
b RET 1 (return video 1) button and select switch
The return video signal selected with the switch is
displayed on the viewfinder screen while the button is
pressed.
c RET 2 (return video 2) button and select switch
When other return video systems are used in addition to
return video 1, you can monitor the signal selected with the
switch on the viewfinder screen while pressing the button.
Note
The RET 1 button has priority over the RET 2 button if
both buttons are pressed.
d LIGHT switch
Set to ON to illuminate the operation panel.
d LIGHT switch
2
3
LIGHT
1
4
ON
OFF
PGM2
PROD
INCOM
ON
ENG
Hide quick links:
Advertisement
Table of Contents
