Machine ' S Safety Equipment - Husqvarna K960 Operator's Manual
Husqvarna cut-off saw operator's manual
Hide thumbs
Also See for K960:
- Operator's manual (24 pages) ,
- Operator's manual (24 pages) ,
- Operator's manual (24 pages)
Table of Contents
Advertisement
Mac hine ' ' ' ' s safety equipment
This section descr ibes the machine ' s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
W ARNING! Never use a machine that has
!
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.
Vibration damping system
Y our machine is equipped with a vibration damping system
that is designed to minimize vibration and make operation
easier.
The machine ' s vibration damping system reduces the transfer
of vibration between the engine unit/cutting equipment and
the machine ' s handle unit.
The engine body, including the cutting equipment, is insulated
from the handles by vibration damping units.
Stop s witch
Use the stop s witch to switch off the engine.
Muffl er
W ARNING! The muffler gets very hot in use
!
and remains so for a short time afterwards.
Do not touch the muffler if it is hot!
The m uffler is designed to keep noise levels to a minimum and
to direct exhaust fumes away from the user.
W ARNING! The exhaust fumes from the
!
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!
6 –
English
SAFETY INSTR UCTIONS
IMPOR TANT INFORMATION
F or mufflers it is very important that you follow the
instructions on checking, maintaining and servicing your
machine. See instructions under the heading Checking,
maintaining and servicing the machine's safety equipment.
W ARNING! The inside of the muffler contain
!
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a
damaged muffler.
Thr ottle lockout
The throttle tr igger lock is designed to prevent accidental
operation of the throttle. When the lock (A) is pressed in this
releases the throttle (B).
A
B
The trigger lock remains pressed in as long as the throttle is
pressed. When the grip on the handle is released the throttle
trigger and the throttle trigger lock both return to their original
positions. This is controlled by two independent return spring
systems. This means that the throttle trigger is automatically
locked in the idle position.
Guar d for the blade
W ARNING! Always check that the blade
!
guard is fitted correctly before starting the
machine.
This guard is fi tted above the cutting blade and is designed to
prevent parts of the blade or cutting fragments from being
thrown towards the user.
Hide quick links:
Advertisement
Table of Contents
