Table of Contents
Advertisement
Installing an output
expander
Note:
After you unpack the output
expander, install it immediately.
Otherwise, the edges of the mounting
brackets could damage tabletops or
fabrics.
Warning:
The output expander tray is
designed to hold the weight of print
material only. Do not use it as a shelf;
excess weight may cause it to disengage
from the output expander.
2
Have someone help you place the printer in the location you have chosen.
If you are installing the printer on an optional drawer or a duplex unit, align the
positioning posts on the option with the holes in the printer. Make sure the printer
is seated securely on the option.
3
Remove any tape or packing material from the outside of the printer.
4
If you purchased an output expander or mailbox, continue with this chapter.
Otherwise, skip to Step 5: "Set up the print supplies" on page 16.
Your printer supports an optional output expander that lets you stack up to 650 sheets
of paper in one bin.
1
Unpack the output expander and remove any packing material.
2
Remove the printer top cover.
3
Align the mounting brackets on the bottom of the output expander with the slots
in the top of the printer.
4
Lower the output expander into place.
Set up the printer and paper handling options
14
Advertisement
Table of Contents
