Whirlpool washing machine Instructions For Use Manual
Top-loading washing machine
Hide thumbs
Also See for washing machine:
- User manual (32 pages) ,
- Use & care manual (12 pages) ,
- Operation manual (6 pages)
Table of Contents
Advertisement
Depending on the model, , the machine's weight will range from 60 kg to
75 kg. Two persons are required to move it.
adequate for the machine's 10 A Current Rating.
The electrical power cable must be replaced exclusively by a licensed electrician.
Whirlpool is a registered trademark of Whirlpool USA
W10312331B
Advertisement
Table of Contents
Related Manuals for Whirlpool washing machine
Summary of Contents for Whirlpool washing machine
- Page 1 Depending on the model, , the machine’s weight will range from 60 kg to 75 kg. Two persons are required to move it. adequate for the machine’s 10 A Current Rating. The electrical power cable must be replaced exclusively by a licensed electrician. Whirlpool is a registered trademark of Whirlpool USA W10312331B...
- Page 2 Ensure Ensure that the ventilation openings in the base of the washing machine (if available on your model) are not obstructed by a carpet or other material. Single inlet -...
- Page 3 that that The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
-
Page 4: Description Of The Washing Machine
BEFORE THE FIRST WASH CYCLE Clean the outside of the washing machine with a damp cloth. Do not use abrasive detergents. To remove any residual water used during testing by the manufacturer, we Never open the door forcibly or use it as a step. - Page 5 / soak...
- Page 6 Depending on the model, remove the plinth by holding it tightly on both sides, pushing it downward and tilting it to the front. Or, push down on the tabs provided on both the sides and remove it. unds...
- Page 8 solv and the power switched remove some...
- Page 9 Hot / Cold fill fault - For Models with Dual Inlets If you wish to connect hot and cold water supply (Fig.1): 1. Fix the red marked inlet hose to the hot water tap and to the inlet valve with the red filter on the rear side of machine.
- Page 10 C. Error code purchase:...