hit counter script
Pioneer AVH-P6300BT Owner's Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. AVH-P6300BT
  6. Owner's manual

Pioneer AVH-P6300BT Owner's Manual

Dvd rds av receiver
Hide thumbs Also See for AVH-P6300BT:
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
DVD RDS AV RECEIVER
AVH-P6300BT
English

Advertisement

Table of Contents
loading

Related Manuals for Pioneer AVH-P6300BT

Summary of Contents for Pioneer AVH-P6300BT

  • Page 1 Owner’s Manual DVD RDS AV RECEIVER AVH-P6300BT English...

  • Page 2: Table Of Contents

    Contents Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future refer- ence.
  • Page 3 Contents Searching for the part you want to play 30 Menu operations Changing audio language during playback Introduction of menu operations 40 (Multi-audio) 31 Audio Adjustments 41 Changing the subtitle language during Digital Signal Processor 44 playback (Multi-subtitle) 31 Setting up the DVD player 54 Changing the viewing angle during playback System settings 58 (Multi-angle) 31...

  • Page 4: Precautions

    Section Precautions IMPORTANT SAFEGUARDS WARNING Please read all of these instructions regarding ! Do not attempt to install or service your your display and retain them for future refer- display by yourself. Installation or servi- ence. cing of the display by persons without 1 Read this manual fully and carefully be- training and experience in electronic fore operating your display.

  • Page 5: To Avoid Battery Exhaustion

    Section Precautions To avoid battery exhaustion To watch a video image on the front display, park your vehicle in a safe place and apply the Keep the vehicle engine running when using parking brake. this unit to avoid draining the battery power. ! When no power is supplied to this unit, When using a display connected such as when the vehicle battery is being...

  • Page 6: Before You Start

    Section Before you start CAUTION This product is a class 1 laser product classi- fied under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not re- move any covers or attempt to gain access to If you want to dispose this product, do not mix the inside of the product.

  • Page 7: In Case Of Trouble

    The front panel and the head unit are con- please contact your dealer or nearest author- nected on the left side. Make sure that the ized Pioneer Service Station. front panel has been properly connected to the head unit. Protecting your unit from theft The front panel can be detached to deter theft.

  • Page 8: Demo Mode

    Section Before you start Note Switch your engine ON or set the ignition switch to ACC ON before pressing RESET in the follow- ing situations: ! After completing connections ! When erasing all stored settings ! When resetting the unit to its initial (factory) settings Demo mode The feature demo automatically starts when...

  • Page 9: What's What

    Section What’s what Head unit CAUTION ! Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB mem- ory as any device connected directly to the unit will protrude out from the unit and may be dangerous.

  • Page 10: Basic Operations

    Refer to Setting rear monitor view camera (back up camera) on page 62. output on page 68. ! An external unit refers to a Pioneer product, Rear Switching the rear view such as those which will be available in the fu- View image on or off.

  • Page 11: Operating The Scroll Bar And The Scrubber Bar

    Section Basic operations Operating the scroll bar Activating the touch panel and the scrubber bar keys Wed 28 May Audio 12:45 Fader/Balance F/R 0 L/R 0 Graphic EQ Super Bass Auto EQ Sonic Center Control L/R 0 Loudness High Subwoofer 01:45 -02:45 Return...

  • Page 12: Common Operations For Menu Settings/Lists

    Section Basic operations ! When the ignition switch is turned OFF Common operations for after the LCD panel has been closed, turn- menu settings/lists ing the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In Starting the Bluetooth telephone this case, press OPEN/CLOSE to open the menu.

  • Page 13: Setting The Clock

    Section Basic operations Push an SD. Eject an SD. Setting the clock Switch to Clock Adjustment display. Refer to Basic operations of this unit on page Select the item to set. Touch a or b to set the correct date and time.

  • Page 14: Tuner

    Section Tuner Introduction of tuner operations Recalling radio station fre- quencies assigned to preset tuning keys. 1 2 3 Local News Wed 28 may Radio 12:45 Displaying radio text Refer to Displaying radio text Abcdeabcdeabcde 87.50 on page 25. Abcdeabcdeabcde Storing and recalling radio text.

  • Page 15: Playing Moving Images

    Section Playing moving images Introduction of video Touch panel keys playback operations Selecting the repeat range. Refer to Repeating playback You can view DVD/DVD-R/DVD-RW/CD/CD-R/ on page 28. CD-RW/USB/SD/iPod. During playback, touch the If an iPod with video capabilities is connected point at which you want to re- to this unit using an interface cable such as sume playback the next time...
  • Page 16 Section Playing moving images Starting the search function. Speeding down the playback Refer to Searching for the part speed in four steps, during you want to play on page 30. slow motion playback on Refer to Selecting files from Video CD. the file name list on page 32.
  • Page 17 ! While the iPod is connected to this unit, the title. Refer to Automatic playback of DVDs on page iPod cannot be turned on or off. ! While an iPod is connected to this unit, PIONEER, However, the iPod can be turned on or off Accessory Attached or (check mark) is dis- when you select an SD as the source.

  • Page 18: Operations

    Section TV tuner Introduction of TV tuner Manual tuning (step by step) using the buttons operations 1 Press c or d (TRACK/SEEK). Seek tuning using the buttons 1 Press and hold c or d (TRACK/SEEK). Wed 28 may 12:45 Notes ! Refer to Setting the video signal on page 63 to set the TV signal.

  • Page 19: Playing Audio

    Section Playing audio Introduction of sound Switching the equalizer curves. playback operations Refer to Using the equali- zer on page 41. You can listen to DVD-R/DVD-RW/CD/CD-R/ Touch and hold for more CD-RW/USB/SD/iPod sound files. than two seconds to turn Audio CD the auto-equalizer on or off.
  • Page 20 Playback will automatically start. ! While an iPod is connected to this unit, PIONEER, Refer to Displaying lists related to the currently Accessory Attached or (check mark) is dis- playing song (Link Search) played on the iPod.

  • Page 21: Playing Still Images

    Section Playing still images Introduction of still image Starting or pausing the sli- playback operations deshow. You can view still images saved in CD-R/CD- Rotating the displayed pic- RW/USB/SD. ture 90° clockwise. Capturing an image in 1 2 3 JPEG files. Refer to Capture an image Wed 28 may Photo...

  • Page 22: Operations

    Section Playing still images Introduction of still image Rotating the displayed pic- playback as a slideshow ture 90° clockwise. operations Capturing an image in JPEG files. You can view still images saved in CD-R/CD- Refer to Capture an image RW/USB/SD as a slideshow when listening to in JPEG files on page 33.

  • Page 23: Bluetooth Telephone

    Section Bluetooth Telephone Introduction of Bluetooth Indicates that an incoming call has been re- ceived and has not been checked yet. telephone operations ! Not displayed for calls made when your cellular phone is disconnected from this Telephone standby display unit.
  • Page 24 Section Bluetooth Telephone Accepting an incoming call. 1 Connection Making a phone call, when First, you need to connect a Bluetooth telephone selecting a phone number. to this unit. Switching between callers on For detailed instructions on connecting your hold. phone to this unit via Bluetooth wireless technol- Ending a call.

  • Page 25: Detailed Instructions

    Section Detailed instructions Storing and recalling stations The next time you press the same button in radio text display the stored text will be re- You can easily store up to six(for tuner)/12(for called from the memory. TV) stations for each band as presets. Display the preset screen.

  • Page 26: Receiving Traffic Announcements

    Section Detailed instructions Receiving traffic Display the preset screen. Refer to Introduction of tuner operations on announcements page 14. Regardless of the source you are listening to, Touch PTY. you can receive traffic announcements auto- matically with TA (traffic announcement Touch a or b to select a program type.

  • Page 27: Switching The Media File Type

    Section Detailed instructions Select the desired menu item. Others Educate (Education), Drama (Drama), Culture (Cul- ture), Science (Science), Varied (Varied), Children (Children’s), Social (Social affairs), Religion (Reli- gion), Phone In (Phone in), Touring (Travel), Leisure (Leisure), Document (Documentaries) Selecting the desired menu item. Switching the media file type When playing a disc containing a mixture of Starting playback from the se-...

  • Page 28: Random Play (Shuffle)

    Section Detailed instructions ! Disc – Play back songs/tracks in the se- ! While this function is in use, the iPod will not turn off even if the ignition key is turned lected disc in random order. ! On – Play back files in random order within off.

  • Page 29: Playing Videos From Your Ipod

    Section Detailed instructions ! If you perform title/chapter search, fast for- To make operating and searching easy, opera- ward/reverse, frame-by-frame playback or tions to control an iPod with this unit are de- slow motion playback during Chapter, the signed to be as similar to the iPod as possible. repeat play range changes to OFF.

  • Page 30: Resume Playback (Bookmark)

    Section Detailed instructions Switch to alphabet search mode. Slow motion playback Notes ! There is no sound during slow motion play- Switching to alphabet search mode. back. ! Images during slow motion playback may be Alphabet search mode is displayed. unclear for some discs.

  • Page 31: Changing Audio Language During Playback (Multi-Audio)

    Section Detailed instructions Changing audio language Changing the viewing angle during playback (Multi-audio) during playback (Multi-angle) With DVDs/DivX files that provides audio play- With DVDs featuring multi-angle (scenes shot back in different languages and different from multiple angles) recordings, you can audio systems (Dolby Digital, DTS, etc.), you switch among viewing angles during play- can switch between languages/audio systems...

  • Page 32: Pbc Playback

    Section Detailed instructions PBC playback Selecting files from the file name list (Function for Video CDs) During playback of Video CDs featuring PBC (Function for USB/SD/DivX) (Playback Control), PBC ON is displayed. File name list is a list of file names (or folder names) from which you can select a file (or Start the search function.

  • Page 33: Changing Audiobook Speed

    Section Detailed instructions Changing audiobook speed be played is shown on-screen. You can then decide whether or not to play the disc. (Function for iPod) ! If there is no limit to the number of times – Playback at a speed faster than the DivX VOD content can be viewed, then normal you may load the disc into your player and...

  • Page 34: Changing The Wide Screen Mode

    Section Detailed instructions Capture the image. sized picture (wide screen picture) where cap- Refer to Introduction of still image playback op- tions lie outside the picture. erations on page 21. Zoom (zoom) Refer to Introduction of still image playback as The 4:3 picture is enlarged in the same proportion a slideshow operations on page 22.

  • Page 35: Selecting A Number By Alphabet Search Mode

    Section Detailed instructions # The order of the first name and last name may Select the phone number. # If you want to store the phone number, touch be different from that of the cellular phone. and hold the list. Touch the list to display the phone number list of the selected entry.

  • Page 36: Setting Automatic Answering

    Section Detailed instructions Touch the list number to select a phone Connect your cellular phone to this number. unit. Name and phone number are displayed in the Turn ring tone on or off. detailed list. Refer to Introduction of Bluetooth telephone op- # If you want to store the phone number, touch erations on page 23.

  • Page 37: Making A Call By Entering Phone Number

    Section Detailed instructions Making a call by entering Pairing from this unit phone number Connection 01: Phone1 Wed 28 may 12:45 02: Phone2 ABCDEHGHI 03: Phone3 012345678901 04: Phone4 05: Phone5 Display the Bluetooth Connection Menu. Important Refer to Introduction of Bluetooth telephone op- Be sure to park your vehicle in a safe place and erations on page 23.

  • Page 38: Using A Bluetooth Device To Pair

    Section Detailed instructions # The PIN code is set to 0000 as the default, but # If five devices are already paired, can be changed. Refer to Entering PIN code for Memory Full is displayed and pairing cannot be Bluetooth wireless connection on the next page. performed.

  • Page 39: Switching Visible Unit

    Section Detailed instructions # To turn automatic connection off, touch Display the Bluetooth Connection Auto Connect again. Menu. Refer to Introduction of Bluetooth telephone op- Turn your vehicle’s ACC switch off and erations on page 23. Touch PIN Code Input to select PIN code input.

  • Page 40: Menu Operations

    Section Menu operations Introduction of menu cessor’s audio menu. For details, refer to Intro- duction of DSP adjustments on page 44. operations ! You can display the Video Setup menu when a Disc, USB or SD source is selected. 2 2 2 1 ! If you start the Video Setup menu, playback Audio is stopped.

  • Page 41: Audio Adjustments

    Section Menu operations Audio Adjustments Display Equalizer curve Note Vocal Vocal When selecting FM as the source, you cannot Custom1 Custom 1 switch to Source Level Adjuster. Custom2 Custom 2 Flat Flat Using fader/balance adjustment Super Bass Super bass You can change the fader/balance setting to provide an ideal listening environment for all ! The equalizer curves for Custom1 and of the occupied seats.

  • Page 42: Adjusting Loudness

    Section Menu operations Touch Graphic EQ on the audio function Adjusting loudness menu. Loudness compensates for deficiencies in the low- and high-frequency ranges at low volume. Touch c or d to select the desired item. Powerful—Natural—Vocal—Custom1— Display the audio function menu. Custom2—Flat—Super Bass Refer to Introduction of menu operations on page 40.

  • Page 43: Boosting The Bass

    Section Menu operations Boosting the bass Touch Source Level Adjuster on the audio function menu. You can boost the bass level. Touch a or b to adjust the source vo- Display the audio function menu. lume. Refer to Introduction of menu operations on Range: +4 to –4 page 40.

  • Page 44: Digital Signal Processor

    Section Menu operations Digital Signal Processor in the center of the sound field. With the posi- tion selector function, you can automatically Introduction of DSP adjustments adjust the speaker output levels and insert a delay time to match the number and position You can use this unit to control a DEQ-P6600 of the occupied seats.

  • Page 45: Adjusting Source Levels

    Section Menu operations Touch Fader/Balance on the DSP func- (such as Jazz, Hall or Club), we recommend turn- tion menu. ing Dolby Pro Logic II off. Touch a or b to adjust the front/rear Adjusting source levels speaker balance. Range: Front:25 to Rear:25 With SLA (source level adjustment), the vo- # Select F/R: 0 L/R: 0 when only using two lume levels of each source can be adjusted to...
  • Page 46 Section Menu operations ! When direct control is on, all audio func- Using dynamic range control tions except MUTE and Dolby Pro Logic II The dynamic range refers to the difference be- are locked. tween the smallest and largest sounds emitted.

  • Page 47: Setting The Speaker Setting

    Section Menu operations ! Panorama (Panorama) extends the front Setting the speaker setting stereo image to include the surround Be sure to adjust the speaker settings, such speakers for an exciting “wraparound” ef- as size (bass capacity), according to the fect.

  • Page 48: Adjusting The Speaker Output Levels

    Section Menu operations Display the DSP function menu. Rear-R (right rear speaker)—Rear-L (left rear Refer to Introduction of menu operations on speaker)—Subwoofer (subwoofer) # Speakers with the size set to Off cannot be se- page 40. lected. (Refer to Setting the speaker setting on the Touch Speaker Setting.

  • Page 49: Adjusting The Speaker Output Levels Using A Test Tone

    Section Menu operations Note Notes ! If necessary, select speakers and adjust their When you select a cross-over frequency, you are ‘absolute’ output levels. (Refer to Adjusting setting the cross-over frequency for the subwoo- fer’s L.P.F. (low-pass filter) and the Small speak- the speaker output levels on the previous er’s H.P.F.

  • Page 50: Using The Equalizer

    Section Menu operations ! The equalizer curves for Custom1 and Display the DSP function menu. Refer to Introduction of menu operations on Custom2 can be adjusted. ! When Flat, no changes are made to the page 40. sound. You can check the effects of the Touch Time Alignment and then touch equalizer curves by switching alternatively Adjustment.
  • Page 51 Section Menu operations Touch Parametric EQ. Using the auto-equalizer The auto-equalizer is the equalizer curve cre- Touch a or b to select the desired item. ated by auto TA and EQ (refer to Auto TA and EQ (equalizer)—SP-Select (speakers)—Band EQ (auto-time alignment and auto-equalizing) (bands)—Frequency (center frequency)—...
  • Page 52 Section Menu operations — The fader/balance settings return to the ! If the microphone is placed in an unsuitable position the measurement tone may become center position. (Refer to page 44.) — The equalizer curve switches to Flat. loud and measurement may take a long time, resulting in battery drainage.
  • Page 53 Section Menu operations # It takes about nine minutes for auto EQ mea- Select the position for the seat on which the microphone is placed. surement to be completed when all the speakers Refer to Using the position selector on page are connected.

  • Page 54: Setting Up The Dvd Player

    Section Menu operations Setting up the DVD player Setting the audio language You can set the preferred audio language. Setting the subtitle language You can set a desired subtitle language. When Display the Video Setup menu. available, the subtitles will be displayed in the Refer to Introduction of menu operations on selected language.

  • Page 55: Setting The Slide Show Interval

    Section Menu operations Setting the multi-angle DVD Pan Scan setting. Confirm whether the disc package bears the mark. display 16 : 9 LB ! The TV aspect ratio cannot be changed for The angle icon can be set so it appears on some discs.

  • Page 56: Setting The Divx Subtitle File

    Section Menu operations Setting the code number and level Changing the level A code number must be registered in order to You can change the set parental lock level. play back discs with parental lock. Display the Video Setup menu. Display the Video Setup menu.

  • Page 57: Setting For Digital Output

    Section Menu operations Touch DivX Subtitle on the Video Setup Touch DivX VOD on the Video Setup menu to select the desired subtitle setting. menu. ! Original – Display the DivX subtitles Touch Deregistration Code. ! Custom – Display the DivX external subti- # To cancel deregistration, touch Cancel.

  • Page 58: System Settings

    Section Menu operations System settings Touch Rear Speaker on the system menu to switch the subwoofer output or Switching the auxiliary setting full-range speaker. # When no subwoofer is connected to the rear Activate this setting when using an auxiliary output, select Full (full-range speaker).

  • Page 59: Rds Setting

    Section Menu operations RDS setting Turn the unit off. Refer to Basic operations of this unit on page Limiting stations to regional programming Display the system menu. When AF is used, the regional function limits Refer to Introduction of menu operations on the selection of stations to those broadcasting page 40.

  • Page 60: Updating Bluetooth Connection Software

    Section Menu operations Updating Bluetooth connection If text information such as the title name, artist name or a comment is embedded in a Eur- software opean language or Russian, they can also be This function is used to update this unit with displayed on this unit.

  • Page 61: Setting The Automatic Open Function

    Section Menu operations Setting the automatic open Adjusting the LCD panel angle function Important To prevent the display from hitting the shift ! If you can hear the LCD panel knocking lever of an automatic vehicle when it is in the against your vehicle’s console or dashboard, P (park) position, or when you do not wish the touch and hold OPEN/CLOSE to temporarily...

  • Page 62: Switching The Warning Tone

    Display the system menu. Refer to Introduction of menu operations on CAUTION page 40. Pioneer recommends the use of a camera Touch Video Output Format on the sys- which outputs mirror-reversed images. tem menu to select the video output for- Otherwise, the screen image will appear re- mat.

  • Page 63: Setting The Video Signal

    Normally, select the appro- that information. priate TV signal. ! About your country TV signal, consult with your nearest Pioneer dealer. WARNING ! You can operate this function only for the As a loud tone (noise) may be emitted from the video signal input into the AV input.
  • Page 64 Section Menu operations Before operating the auto EQ function Performing auto EQ ! Carry out auto EQ in as quiet a place as Stop the car in a place that is quiet, possible, with the car engine and air condi- close all the doors, windows and sun roof, tioning switched off.

  • Page 65: Resetting The Audio Functions

    Section Menu operations When the 10-second countdown starts, Resetting the audio functions get out of the car and close the door within You can reset all audio functions. 10 seconds. Display the system menu. A measurement tone (noise) is emitted from Refer to Introduction of menu operations on the speakers, and auto EQ measurement be- gins.

  • Page 66: Entertainment Settings

    Section Menu operations Entertainment settings The customized color has been stored in the memory. Selecting the illumination color The set color will be recalled from the memory the next time you touch the same icon. This unit is equipped with multiple-color illu- mination.

  • Page 67: Customizing Menus

    Section Menu operations Customizing menus Display menu columns to register. Refer to Introduction of menu operations on page 40. You can customize menus except Video Setup menu. Touch and hold the menu column to register it. # To cancel registration, touch and hold the menu column again.

  • Page 68: Other Functions

    Section Other Functions ! RGB Dot Adjustment – Adjusts phase Changing the picture shifting by dot clock when a Navigation sys- adjustment tem is connected # You cannot adjust the picture adjustment for You can adjust the Brightness (brightness), Contrast (contrast), Color (color) , Hue (hue), the rear view camera when Camera Polarity is Dimmer (dimmer), Temperature (tempera- set to Off.

  • Page 69: Adjusting The Response Positions Of The Touch Panels (Touch Panel Calibration)

    AUX source ! If the touch panel cannot be adjusted prop- and is assigned to AUX. erly, consult your local Pioneer dealer. Turn the unit off. About AUX connection methods Refer to Basic operations of this unit on page You can connect auxiliary devices to this unit.

  • Page 70: Using An External Unit

    Refer to Using the auto-equalizer Using an external unit on page 42. An external unit refers to a Pioneer product, such as those which will be available in the fu- Actions will differ depending on ture. Although incompatible as a source, the the connected external unit.

  • Page 71: Connecting The Units

    ACC (accessory) position on the ignition not be used. switch. CAUTION ! PIONEER does not recommend that you in- stall or service your display unit yourself. In- stalling or servicing the product may expose ACC position No ACC position you to risk of electric shock or other hazards.
  • Page 72 Section Installation — Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited. — Use a fuse of the rating prescribed. — Never wire the negative speaker cable di- rectly to ground.
  • Page 73 Section Installation...

  • Page 74: Connecting The Power Cord

    Section Installation Connecting the power cord Wired remote input (WIRED REMOTE INPUT) Microphone (supplied) Hard-wired remote control adapter can be connected (sold separately). 17 cm RGB input 17 cm Microphone input Jack (MIC) Note: Depending on the kind of vehicle, the function of 2* and 4* may be different.
  • Page 75 Section Installation Antenna input Navigation unit 26 pin cable (Supplied with Navigation unit) (AVIC-F220 (sold Insert the 26 pin cable in the direction separately)). indicated in the figure. Please contact your dealer to inquire about the connectable navigation unit. Fuse resistor Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position.

  • Page 76: When Connecting To Separately Sold Power Amp

    Section Installation When connecting to separately sold power amp Rear output (REAR OUTPUT) 13 cm To rear output 13 cm Front output (FRONT OUTPUT) To front output Subwoofer output (SUBWOOFER OUTPUT) 17 cm To subwoofer Power amp output (sold separately) Power amp Connect with RCA cables (sold separately)

  • Page 77: Connecting The System

    Section Installation Connecting the system Wired remote input (WIRED REMOTE INPUT) Hard-wired remote control adapter can be connected (sold separately). This product Multi-MD player (sold separately) IP-BUS cable IP-BUS input...

  • Page 78: When Connecting The External Video Component And The Display

    Section Installation When connecting the external video component and the display Rear monitor output RCA cables (sold separately) (REAR MONITOR OUTPUT) To video input Display with RCA 13 cm input jacks (sold separately) This product To audio inputs Mini pin plug cable (sold separately) Rear audio output (REAR MONITOR OUTPUT(AUDIO))
  • Page 79 Section Installation When connecting with a multi-channel processor Wired remote input (WIRED REMOTE INPUT) Hard-wired remote control adapter can be connected (sold separately). 17 cm Optical output This product This product IP-BUS input 17 cm Subwoofer output (SUBWOOFER OUTPUT) To SWL To SWR Black Optical cable connection box...

  • Page 80: When Connecting With A Rear View Camera

    Section Installation When connecting with a rear This product view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). Rear view camera input (REAR VIEW CAMERA IN) WARNING...

  • Page 81: Installation

    Section Installation ! The cords must not cover up the area shown Installation in the figure below. This is necessary to allow Notes the amplifiers to radiate freely. ! Check all connections and systems before final installation. ! Do not use unauthorized parts as this may cause malfunctions.
  • Page 82 Section Installation 1 Use binding screws (4 mm × 3 mm) only. 1 Side bracket (small) 2 Flush surface screw (5 mm × 6 mm) Tighten two screws on each side. Use any of binding screws (4 mm × 3 mm), Install the unit into the dashboard.

  • Page 83: Installing The Microphone

    Section Installation Installing the microphone CAUTION It is extremely dangerous to allow the micro- phone lead to become wound around the steer- ing column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving. Note 1 Mounting sleeve Install the microphone in a position and orienta-...
  • Page 84 Section Installation Install the microphone clip on the rear side of the steering column. 1 Microphone clip 2 Clamp Use separately sold clamps to secure the lead where necessary inside the vehicle. When installing the microphone on the steering column Install the microphone on the micro- phone clip.

  • Page 85: Additional Information

    Appendix Additional Information Troubleshooting Symptom Cause Action (Refer- ence page) Common There is no The parking Connect the park- Symptom Cause Action (Refer- image dis- brake cable is ing brake cable, ence page) played. not connected. and apply the park- ing brake.
  • Page 86 Appendix Additional Information Symptom Cause Action (Refer- Symptom Cause Action (Refer- ence page) ence page) Nothing is dis- The rear view Connect a rear Dialog lan- The DVD being The language can- camera is not view camera. guage (and played does not not be switched if played.

  • Page 87: Error Messages

    Error messages appear when viewed on some When you contact your dealer or your nearest displays. This is Pioneer Service Center, be sure to note the not a malfunction. error message. Video CD Tuner Symptom Cause...
  • Page 88 Appendix Additional Information External storage device (USB, SD) Message Cause Action Message Cause Action Protect All the files on Replace the disc. the inserted disc Unplayable This type of file Select a file that are embedded File cannot be played can be played.
  • Page 89 Appendix Additional Information Message Cause Action Message Cause Action Check USB The USB connec- Check that the Format Read Sometimes there Wait until the mes- tor or USB cable USB connector or is a delay be- sage disappears USB cable is not tween the start of and you hear has short-...

  • Page 90: Understanding Auto Eq/Auto Ta And Eq Error Messages

    Power is not please contact check battery. being supplied tery correctly. your dealer or an ! Check the battery from the battery authorized Pioneer to this unit. voltage. Service Station. Understanding messages Understanding auto EQ/ auto TA and EQ error Messages...

  • Page 91: Indicator List

    Appendix Additional Information Indicator list Area 1 Area 2 2 ch Indicates the audio channel. Indicates that a disc with PBC On is being played. Indicates that Dolby Pro Logic II is Indicates that a cellular phone is Area 3 connected.
  • Page 92 Appendix Additional Information Area 2 Shows the genre of the track/song currently being played. Shows the disc/album currently being played. Indicates that the feature demo is Shows the track/song currently being played. Shows the comment currently being played. Shows the artist name for the track/ song currently being played.

  • Page 93: Handling Guidelines

    Appendix Additional Information Handling guidelines Read the precautions for discs before using them. Discs and player Certain functions may not be available for some DVD video discs. Use only discs featuring any of following logos. It may not be possible to play back some DVD video discs.

  • Page 94: Sd Memory Card

    Appendix Additional Information SD memory card DVD-R/DVD-RW discs Unfinalized DVD-R/-RW discs which have been re- This unit supports only the following types of SD corded in the Video format (video mode) cannot be memory cards. played back. ! SD Playback of DVD-R/DVD-RW discs may not be possi- ! SDHC ble, due to disc characteristics, scratches or dirt on Keep the SD memory card out of the reach of chil-...

  • Page 95: Compressed Audio Compatibility (Disc, Usb, Sd)

    Appendix Additional Information JPEG picture files Compressed audio compatibility (disc, USB, SD) JPEG is short for Joint Photographic Experts Group and refers to a still image compression technology standard. Files are compatible with Baseline JPEG and EXIF 2.1 File extension: .wma still images up to a resolution of 8 192 ×...

  • Page 96: Ipod Compatibility

    Sampling frequency: 8 kHz to 48 kHz Compatible external subtitle file extension: .srt CAUTION ! Pioneer accepts no responsibility for data lost Supplemental information on the USB memory/USB portable audio Some characters in a file name (including the file ex- player/SD memory card even if that data is tension) or a folder name may not be displayed.

  • Page 97: Sequence Of Audio Files

    Additional Information Using the display correctly CAUTION CAUTION Pioneer accepts no responsibility for data lost on ! If liquid or foreign matter should get inside the iPod, even if that data is lost while this unit is used. this unit, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station.

  • Page 98: Copyright And Trademark

    ! When using a cellular phone, keep the an- tered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Pioneer tenna away from the display to prevent dis- Corporation is under license. Other trade-...
  • Page 99 Appendix Additional Information double-D symbol are trademarks of Dolby Supply of this product only conveys a license Laboratories. for private, non-commercial use and does not DivX convey a license nor imply any right to use â â DivX , DivX Certified and associated logos this product in any commercial (i.e.

  • Page 100: Language Code Chart For Dvd

    Appendix Additional Information Language code chart for DVD Language (code), input code Japanese (ja), 1001 Dzongkha (dz), 0426 Kurdish (ku), 1121 Kinyarwanda (rw), 1823 English (en), 0514 Ewe (ee), 0505 Komi (kv), 1122 Sanskrit (sa), 1901 French (fr), 0618 Esperanto (eo), 0515 Cornish (kw), 1123 Sardinian (sc), 1903 Spanish (es), 0519...

  • Page 101: Specifications

    Appendix Additional Information Specifications Subwoofer (mono): Frequency ......50 Hz/63 Hz/80 Hz/100 Hz/ General 125 Hz Slope ........–18 dB/oct Rated power source ....14.4 V DC Gain ........+6 dB to –24 dB (allowable voltage range: Phase ........Normal/Reverse 12.0 V to 14.4 V DC) Bass boost: Grounding system ....
  • Page 102 Appendix Additional Information MP3 decoding format ... MPEG-1 & 2 Audio Layer 3 WMA decoding format ..Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player) AAC decoding format .... MPEG-4 AAC (iTunes en- coded only) (Ver.
  • Page 104 TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 先鋒股份有限公司...

Table of Contents