Table of Contents
Advertisement
Available languages
Available languages
(continued)
[IP setting]
Select "IP setting mode" and set to
"Automatic"
(When IP automatic acquisition in DHCP can be used)
Menu
IP address/DNS settings
IP setting mode
Automatic
IP address
192.168.0.5
Subnet mask
255.255.255.0
Default gateway
192.168.0.254
The acquired address is displayed.
Each IP address is acquired automatically
[DNS settings]
Select "DNS setting mode" and set to "Automatic"
(When DNS automatic acquisition in DHCP can be used)
Menu
IP address/DNS settings
IP setting mode
Manual
Default gateway
192.168.0.254
IP setting mode
Automatic
DNS setting mode
Automatic
OK
Primary DNS
192.168.0.20
Secondary DNS
192.168.0.21
The acquired address is displayed.
Each IP address is acquired automatically
If you are using a broadband router, IP automatic acquisition in DHCP can be
used under normal circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for each device.
Set only if specified by the provider.
It is not required for normal household use.
Proxy address
This is the address of the relay server that is connected to the target
server instead of the browser and sends data to the browser.
Setting is only required if specified by the provider.
Select "Proxy address" and press OK
Menu
VIERA CAST setting
Proxy address
Proxy port
0
Allows manual entry of proxy address for relay
server. (normally not required)
Enter address
(see "Entering characters" on p. 19)
Proxy address
pr
I
o
Select "OK"
Select "Software update"
Menu
Network settings
Connection test
Network connection Wireless (WiFi)
IP address/DNS settings
VIERA CAST setting
Network cameras list
Software update
Mac address
00-0b-97-7c-65-e9
Check if software update for the TV is
available
The Network settings become effective when you close the menu and run "Connection test".
Manual setting
Select "IP setting mode" and set to "Manual"
Select the item and press OK
Check the specifications of the broadband router
select
and enter each IP address
Subnet mask
10I
OK
or
Manual setting
Select "DNS setting mode" and set to "Manual"
Select the item and press OK
select
Enter each IP address as was specified by the
provider
OK
Primary DNS
10I
or
Proxy port
This number is specified by the provider together with
the Proxy address.
Select "Proxy port" and press OK
Enter the Port number
select
Proxy port
OK
or
If you perform the Proxy settings, it may make it
impossible to view VIERA CAST movie content.
Press OK to start the Software update screen
select
Follow directions on the screen
* Set "Clock" first. (p. 17)
OK
0
.
0 .
OK
0 .
0
change
channel
OK
0
.
0 .
0 .
0
select
OK
0
select
OK
47
- Quick Links:
- Quick Start Guide
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
