Summary of Contents for AEG LAVAMAT 47280 aqua control
Page 1
LAVAMAT 47280 aqua control LAVAMAT 47080 aqua control The environmentally friendly washing machine User information PERFEKT IN FORM UND FUNKTION...
User information SUMMARY FOR THE USER ....................4 WARNINGS.....................4 Usage .......................4 Precautions against frost................5 Scrapping......................6 Protection of the environment ...............6 Washing machine description..............7 The detergents dispenser................7 Control panel....................8 How to do a wash ?..................9 Loading the washing...................9 Detergents......................9 Choice of the required programme............. 10 Choice of the spinning speed..............
Page 3
User information FOR THE INSTALLER .................. 29 Installation and connection instructions .......... 29 Warnings...................... 29 Unpacking ....................30 Technical characteristics................. 34 Garantee conditions and After Sales Service........34...
User information A - FOR THE USER WARNINGS Keep this user’s manual with your washing machine. If you sell your washing machine or give it away, make sure that it is accompanied by its user’s manual. The new user can then be informed of how the washing machine operates and read relevant warnings.
User information • Remember to remove all coins, safety pins, boraches, screws, etc., before each wash. They can cause serious damage if they are left in your washing. • Do not put articles in your washing machine if you have used a solvent, alcohol, trichloroethylene, etc., to remove stains from them.
User information Water that remained in the pipes will then be evacuated, thus preventing the formation of frost or ice that can damage your washing machine. The next time you want to use your washing machine, make sure that it is installed in a room in which the temperature is above 0°C. Scrapping All materials marked with the symbol can be recycled.
User information Washing machine description 1 - Control panel 2 - Lid opening handle 3 - Filter door 4 - Leveling screws 5 - Lever for moving the washing machine The detergents dispenser Symbols 1 - prewash 2 - wash 3 - softener (do not exceed the MAX mark) 4 - softener overflow...
User information How to do a wash ? Before the first wash in your washing machine, we recommend that you should do a preliminary wash at 90°C with detergent but without any washing to clean the tub. Loading the washing •...
User information Choice of the required programme The programmes table will tell you which is the appropriate programme for your washing type (see programme tables). Put the programme selector onto the required programme ; the lights corresponding to the phases making up the programme will light up.
Page 11
User information «Prewash» pushbutton The washing machine does a prewash at 30°C maximum. The prewash finishes with a brief spinning for cotton and synthetic programs, and by a draining for delicates programs. «Rinse plus» pushbutton This option adds two rinses on Cotton, Synthetics and Delicates programmes.
User information • Cancelling of the programme : If you wish to cancel a programme, turn the knob of the programmes selector on the OFF position. It’s possible to choose a new programme, after the cancelling of the previous one. •...
User information Programme progress display When you select a programme, the leds corresponding to the different step during the programme light on. When the programme starts, only the concerned led of the programme cycle stays lighted on. DRUM SELF POSITIONNING This light illuminates at the end of the washing cycle when the drum is properly positionned.
User information When the appliance is switched on, the led DOOR indicates whether the lid can be opened : DOOR light Can the lid be opened ? is off lighted in green If : - the START/PAUSE pushbutton flashes in red, - and then the error code E40 appears in the display window, - and the END light flashes 4 times and an acoustic signal is emitted 4 times,...
User information You can then select a new programme after cancelling the previous one. End of program The washing machine stops automatically. You will hear a double "click" in the locking device when the cover opens. The cycle end light goes on.
User information Programmes tables Washing This table does not include all possibilities, simply the best and most usual adjustments in practice. Program Washing type Load Temp. Possible °C options - White / Coloureds 5,0 kg 30-95 White or color, for example normally dirty work Rinse Plus clothes, bed linen, table...
User information Separate rinse Washing type Load Program selector White / Coloureds 5,0 kg Energy saving E Synthetics 2,5 kg - RINSES Easy iron 1,0 kg Delicates 2,5 kg Wool / Handwash 1,0 kg Separate spinning Washing type Load Program selector White / Coloureds 5,0 kg Energy saving E...
User information Consumptions and programme durations Timer / Temperature Washing Water Energy Duration quantity consumpt consumpt in kg ion in minutes liters in kWh COTON/LINEN 95 2,00 140-150 ENERGY SAVING E 0,95 140-150 COTON/LINEN 40 0,70 115-125 SYNTHETICS 60 1,10 85-95 DELICATES 30 0,35...
User information Washing guide Sorting and preparing your washing • Sort the washing by type and care symbol (see chapter 5.4: Inter- national symbols for care of textiles): normal wash for strong washing that can resist energetic wash and spin; delicate wash for delicate washing that should be treated more carefully.
User information • about one third full for very delicate articles such as net curtains and wool. For a mixed wash, fill the drum as required for the most delicate material. Detergents and additives Only use detergents and additives suitable for use in a washing machine.
User information Care and cleaning Do not do any cleaning operation until you have unplugged the washing machine. Descaling the washing machine Normally there is no need to descale the washing machine if the detergent was correctly proportioned. If descaling is necessary, use a special non-corrosive product specially designed for washing machines that you can find in the shops.
User information You can thus clean it using running water and a brush or a twisted cloth. Check that the siphons at the back of the detergents dispenser are not blocked. Reassembly : Put the detergents dispenser in the notches until they lock.
Page 24
User information Drain residual water: Put a receptacle under the drain. Turn the cap in the anti-clockwise direction until it is vertical to release residual water. Remove the filter: Unscrew the cap all the way and take it off. Clean it tho-roughly with running water. Put the assembly back and screw it in the clockwise direction.
User’s instructions Operating problems Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem with its operation, please read the following sections before calling the After Sales ser- vice. Symptom Cause The washing machine will •...
Page 26
User’s instructions Symptom Cause There is water on the floor • excess detergent has made too much around the washing ma- foam that overflowed, chine • the detergent is not suitable for washing machine, • the drain siphon is not hooked on pro- perly, •...
Page 27
User’s instructions Symptom Cause The washing cycle is much • the water inlet is blocked, too long • there was a power supply failure or the water was cut off, • the motor temperature safety device tripped, • the water inlet temperature is lower than normal, •...
Page 28
User’s instructions Symptom Cause Softener or Javel water • you did not put in the right amount, flows through the over- • the siphons at the back of the deter- flow orifice when filling* gents dispenser are blocked. *depending on model. ** Eliminate the causes of the failure if you find them, and then press on the «Start/Pause»...
User information A. FOR THE INSTALLER Installation and connection instructions Warnings • This washing machine is heavy. Take care when moving it. • You must remove the packing on the washing machine before use. Failure to remove all transport protection devices can cause damage to the washing machine or nearby furniture.
User information Unpacking Packing used to protect internal parts of the washing machine during transport must be removed before the washing machine is put into service for the first time. Remove all packing from the washing machine. Tilt the washing machine sideways and then remove the packing under the motor, and straighten the washing machine.
Page 31
User information You can now see the openings that must be closed with the caches in the pack attached to the washing machine; do not forget to fold down the central capsule. Make sure that you have removed all these parts from your washing machine and keep them so that you can use them again if you need them for future transport.
Page 32
User information Leveling Precise leveling will prevent vibrations, noise and movements of the washing machine during operation. Make the washing machine level by adjusting the leveling screw that is too short. Unscrew the stand and locking collar assembly (lift the washing machine if necessary). When the washing machine is stable, maintain the stand on the ground and turn the locking collar as far as posible.
Page 33
User information Drain The drain siphon must be placed inside a drain pipe (or in a washbasin) at a height of between 70 and 100 cm. Make sure that it cannot fall. •Important: the drain pipe must never be pro- longed.
Connection to the water network Type 20x27 This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances and directive CEE 73-23 for electrical safety. Garantee conditions and After Sales Service Please contact our AEG agents’ of the country directly.