hit counter script

1210 System Board And Pc Card/Expresscard Slots Assembly - Lenovo ThinkPad R60 Hardware Maintenance Manual

Notebook
Table of Contents

Advertisement

Removing and replacing a FRU

1210 System board and PC Card/ExpressCard slots assembly

For access, remove these FRUs, in order:
v "1010 Battery pack" on page 57
v "1020 Ultrabay Enhanced device (for R60)" on page 58
v "1030 Hard disk drive cover, hard disk drive, and hard disk drive rubber rails"
v "1040 Palm rest or palm rest with fingerprint reader" on page 63
v "1060 Keyboard" on page 67
v "1070 Optical drive (for R60e)" on page 69
v "1080 Modem daughter card (MDC-1.5)" on page 70
v "1090 PCI Express Mini Card for wireless LAN" on page 72
v "1100 PCI Express Mini Card for wireless WAN (for R60)" on page 74
v "1120 Keyboard bezel and wireless WAN antenna cable (AUX)" on page 76
v "1130 SIM card slot" on page 78
v "1140 Fan assembly" on page 79
v "1160 LCD assembly" on page 83
v "1170 Base cover" on page 86
v "1200 Structure frame and IEEE1394 cable" on page 93
98
MT 0656, 0657, 0658, 0659, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9463, 9464
on page 59
Important notices for handling the system board
When handling the system board, bear the following in mind.
v The system board has an accelerometer, which can be broken by applying
several thousands of G-forces.
Note: Dropping a system board from a height of as little as 6 inches so
that it falls flat on a hard bench can subject the accelerometer to as
much as 6,000 G's of shock.
v Be careful not to drop the system board on a bench top that has a hard
surface, such as metal, wood, or composite.
v If a system board is dropped, you must test it, using PC-Doctor for DOS, to
make sure that the HDD Active Protection still functions (see below).
Note: If the test shows that HDD Active Protection is not functioning, be
sure to document the drop in any reject report, and replace the
system board.
v Avoid rough handling of any kind.
v At every point in the process, be sure not to drop or stack the system
board.
v If you put a system board down, be sure to put it only on a padded
surface such as an ESD mat or conductive corrugated material.
After replacing the system board, run PC-Doctor for DOS to make sure that
HDD Active Protection still functions. The procedure is as follows:
1. Place the computer on a horizontal surface.
2. Run Diagnostics --> ThinkPad Devices --> HDD Active Protection Test.
Attention: Do not apply physical shock to the computer while the test is
running.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad r60e

Table of Contents