Safety Precautions The following safety precautions must be taken when installing and using your air conditioner. The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: A circuit breaker For further information on electrical requirements, contact a professional electrician.
Contents REPARING ONDITIONER Safety Precautions ..................Description of Each Component ..............Remote Control - Buttons ................Getting Started ....................Inserting the Remote Control Batteries ............PERATING ONDITIONER Cooling Your Room ..................Airing Your Room ................... Removing Excess Humidity ................10 Adjusting the Air Flow Direction Horizontally ..........
Description of Each Component The design and shape are subject to change. Air outlet Outer air flow blades (up/down orientation) - Except AW0503B / AW0505B / AW0603B / AW0605B Inner air flow Air outlet blades (right/left orientation) Ventilation lever - Except AW0503B / AW0505B...
Getting Started You have just purchased a Samsung window-type room air conditioner which should be installed following your installation manual. Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed. Remote Control Control Panel Press the (On/Off) button. Result: The air conditioner starts up in the Cool mode. The unit beeps twice.
Airing Your Room If you want to provide air circulation without cooling, you can use the Fan mode. Remote Control Control Panel If necessary, press the (On/Off) button. Result: The air conditioner starts up in the Cool mode. The unit beeps twice. If the fan speed(F1, F2 or F3) is not displayed on the control panel: Press the button on the remote control...
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. Remote Control Control Panel If necessary, press the (On/Off) button. Result: The air conditioner starts up in the Cool mode. The unit beeps.
Adjust the air flow blades to the desired position by sliding them side to side. Adjusting the Air Flow Direction Vertically The outer air flow blades can be adjusted to control the vertical air flow direction. (Except AW0503B / AW0505B / AW0603B/AW0605B) RECOMMENDATION When... Adjust the blades to face...
Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You can select the On timer when the air conditioner operates in the Cool or Dry mode. Remote Control Control Panel Check that the air conditioner has been switched off;...
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. You can select the Off timer when the air conditioner operates in the Cool or Dry mode. Remote Control Control Panel Check that the air conditioner has been switched on;...
Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after 8 hours. If you wish to switch the unit off at a specific time, refer to page 13. Remote Control Control Panel Make sure that you have selected the Cool mode.
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the energy saving mode. Remote Control Control Panel To select the energy saving mode, press the button on the remote E.Saver control or button on the unit one or more times until the Energy E.Saver Saver indicator lights up.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. Mode Indoor Temperature Outdoor Temperature Indoor Humidity Cooling 70°F to 90°F approx. 70°F to 110°F approx. 80% or less If the air conditioner is used at...
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. When cleaning the air conditioner, turn it off and pull out the power plug. Open the front grille by pulling the tabs on both sides of the grille.
Solving Common Problems Before contacting an authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation / Solution Check that the circuit breaker used for the air conditioner has not been The air conditioner does triggered.
Technical Specifications Design and specifications are subject to change without notice. Model Power Supply AW0503B AW0505B AW0603B AW0605B AW0803B AW0805B 115V~, 60Hz AW1003B AW1005B AW1203B AW1205B AW1403B AW1803B 230-208V~, 60Hz AW1805B...
Page 20
SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned parts during the limited warranty period specified above.