Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description May 06, 2013 • Initial release for hardware revision A1...
Section 1 - Product Overview Introduction D-Link announces a fast, 200Mbps* Powerline AV Mini Easy Adapter which allows you to connect your computers, networking devices and gaming devices through the most pervasive medium in your house - the electric wiring - and share Internet connections, share printers, transfer files, play games, and more.
• Off. The device is not receiving electrical power. Ethernet LED • Solid. The Ethernet port is linked. • Off. There is no Ethernet connection. D-Link GO-PL-200/GO-PLK-200 User Manual...
Simple Connect Button Press to secure your network or reset your device back to the factory default settings. Refer to page 9 for more information. Ethernet Port Connects to your PC or Ethernet device through an Ethernet cable. D-Link GO-PL-200/GO-PLK-200 User Manual...
Hardware Installation Power Plug in the GO-PL-200 into an AC wall outlet. Note that it is not recommended to connect the GO-PL-200 to a power strip or UPS. Note: Power source is confirmed when the Power LED on the GO-PL-200 is illuminated.
Press the Simple Connect Button of the first adapter for no more than three seconds. The Power LED will start blinking after you release the button. The adapter will create a private, randomly generated encryption key that each Powerline AV Mini Easy Adapter will use. 3. Second Adapter D-Link GO-PL-200/GO-PLK-200 User Manual...
Page 10
Simple Connect Button on any adapter in your existing Powerline network for no more than two seconds. The Power LED will start blinking after you release the button. Note: Both Simple connect buttons must be pressed within two minutes. Now your new adapter will be able to connect to your existing Powerline network. D-Link GO-PL-200/GO-PLK-200 User Manual...
Page 11
Section 2 - Installation ROOM A ROOM B Internet Router GO-PL-200 GO-PL-200 ROOM A ROOM B Internet Router GO-PL-200 GO-PL-200 D-Link GO-PL-200/GO-PLK-200 User Manual...
5. To help prevent against electrical shock, be sure to plug the power cables into properly grounded electrical outlets. 6. The Powerline device is equipped with a three-pronged plug to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from the cable. D-Link GO-PL-200/GO-PLK-200 User Manual...
Page 13
7. Do not cover or block the vents on the device. 8. Make sure that the device has adequate room for ventilation. 9. Avoid placing the device near a heater or radiator. 10. The device should be located only where sufficient ventilation can be ensured. D-Link GO-PL-200/GO-PLK-200 User Manual...
If you are having problems configuring the network with two or more Powerline AV Mini Easy Adapters, please make a reset all of the Network adapters and start configuring the adapters again. Please see page 9 for more details. D-Link GO-PL-200/GO-PLK-200 User Manual...
Humidity • Operation: 10% ~ 90% RH • Compatible with IEEE1901 • Storage: 5% ~ 90% RH • Homeplug AV • CE Class B / FCC Safety • CE LVD / UL Encryption • 128-bit AES D-Link GO-PL-200/GO-PLK-200 User Manual...