200hz lcd tv signature series in full hd, premium series in full hd, true cinematic series, modern classic series, sleek & stylish series, home theatre systems, portable dvd players (2 pages)
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40W4100 RM-YD023 KDL-40W4100 RM-YD023 CANADA KDL-40W4100 RM-YD023 MEXICO KDL-40W4100 RM-YD023 LATIN AMERICA KDL-46W4100 RM-YD023 KDL-46W4100 RM-YD023 CANADA KDL-46W4100 RM-YD023 MEXICO KDL-46W4100 RM-YD023 LATIN AMERICA KDL-46W4150 RM-YD023...
Page 2
Self Diagnosis Supported model SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40W4100 RM-YD023 KDL-40W4100 RM-YD023 CANADA KDL-40W4100 RM-YD023 MEXICO KDL-40W4100 RM-YD023 LATIN AMERICA KDL-46W4100 RM-YD023 KDL-46W4100 RM-YD023 CANADA KDL-46W4100 RM-YD023 MEXICO KDL-46W4100 RM-YD023 LATIN AMERICA KDL-46W4150 RM-YD023 KDL-46W4150 RM-YD023...
Computer Entertainment Inc. manufactured under license from Gemstar-TV “PLAYSTATION” is a registered trademark Guide International, Inc. and/or one of its and “PS3” is a trademark of Sony Computer affiliates. Entertainment Inc. The TV Guide On Screen system is protected Adobe is a registered trademark or a trademark...
Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identifi...
Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony.
KDL-40W4100/46W4100/46W4150 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specifi...
Page 9
Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KDL-40W4100/46W4100/46W4150...
KDL-40W4100/46W4100/46W4150 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).
KDL-40W4100/46W4100/46W4150 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
Page 12
KDL-40W4100/46W4100/46W4150 2 times 5 times LED ON 0.3 sec. LED OFF LED OFF 0.3 sec. 3 sec. Viewing the Self Check Diagnostic List 1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other:...
KDL-40W4100/46W4100/46W4150 1-3. SIDE JACK BRACKET, BU SHIELD AND BU BOARD REMOVAL Release hook and slide out Side Jack Bracket from BU Board. Remove 2 HEX screws. Disconnect 6 connectors. Remove 9 screws. Main Bracket Side Jack Bracket BU Board BU Shield 1-4.
KDL-40W4100/46W4100/46W4150 1-5. STAND REMOVAL Remove 4 screws. Stand Assembly Under Cover 1-6. UNDER COVER AND AC INLET REMOVAL Remove 1 screw. Remove 2 screws. Remove 1 screw. Under Cover AC Bracket AC Inlet Bottom Bracket KDL-40W4100/46W4100/46W4150...
KDL-40W4100/46W4100/46W4150 1-7. STRUCTURAL FRAMES AND BRACKETS REMOVAL (KDL-40W4100 ONLY) Remove 4 screws from Top Vesa Brackets. Remove 1 screw from Main Bracket and Bezel. Remove 4 screws from Main Bracket. Remove 6 screws from Spine Frames. Remove 4 screws from Bottom Vesa Brackets.
KDL-40W4100/46W4100/46W4150 1-8. STRUCTURAL FRAMES AND BRACKETS REMOVAL (KDL-46W4100/46W4150 ONLY) Remove 1 screw from Main Bracket. Remove 3 screws from Main Bracket and Spine Frame. Remove 2 screws from Top Vesa Bracket. Remove 2 screws from G Board Support. Remove 2 screws from Center Frame.
KDL-40W4100/46W4100/46W4150 SPEAKERS, UNDER BAR, H3E/H4 BOARD AND LIGHT GUIDE REMOVAL Slide out Speaker (L) Unit from Bezel. Slide out Speaker (R) Unit from Bezel. Remove 2 screws from Under Bar. Disconnect 1 connector and slide out H3E Board from Clear Panel.
TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “LVDS Cable Routing” on Page 36 for KDL-40W4100 and Page 58 for KDL-46W4100/46W4150 and “LVDS Cable Routing Caution” on Page 37. Disconnect 2 connectors.
The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure” on Page 38 for KDL-40W4100 and Page 60 for KDL-46W4100/46W4150. Remove 8 screws (KDL-40W4100 ONLY).
KDL-40W4100/46W4100/46W4150 WIRE DRESSING KDL-40W4100 ONLY H Boards/Speaker Harness Apply harness to Panel TOP edge. To center Harness, position RED UL tape over center of panel. Use screw on panel as Reference where center of panel is. Apply Sheet core C over Red UL tape once harness is centered.
Page 22
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY H Boards/Speaker Harness: Lighted Sony Logo Apply LCD Tape over panel sharp edge and connect harness to Lighted Sony Logo. KDL-40W4100/46W4100/46W4150...
Page 23
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness Apply Sheet Core C to Harness. Use BLACK UL TAPE on Harness as guide where to apply Sheet Core C. Apply LCD Tape over speaker wires. Use Black UL tape as guide where to apply tape.
Page 24
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness – Attach H3/H4 Connector H4-Bd Apply LCD Tape over panel sharp edge. H3E-Bd KDL-40W4100/46W4100/46W4150...
Page 25
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Combination H Boards/Speaker Harness: H3-Board routing Keep wires from Crossing over edge of Bezel (pinch point) KDL-40W4100/46W4100/46W4150...
Page 26
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY Balancer Board Cable Routing Fix 7P harness with Sheet Core C. NOTE: Wires are routed UNDER Spine Frame to avoid sharp metal edge. CAUTION: Make sure there is sufficient Slack on wire so there is very little...
Page 27
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY CAUTION: Keep wires away from capacitor C6729 7P Connector Assy CAUTION on IP5-Bd. (No Touch) Use plastic Pin on Panel as guide to apply Himelon tape Sheet Core C. KDL-40W4100/46W4100/46W4150...
Page 28
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LEFT Speaker Harness Dressing Apply LCD tape (2 Places) to secure Left Speaker wires. Dress speaker wires in Slide Clamp as shown. No Need to apply LCD Tape over speaker. KDL-40W4100/46W4100/46W4150...
Page 29
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY BU Board Support Bracket Dress harness in slide clamps as shown (3 places). KDL-40W4100/46W4100/46W4150...
Page 30
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY CAUTION: BU Board Support Bracket Dress 30P Harness as shown to keep CAUTION JIG connectors CLEAR of obstructions. KDL-40W4100/46W4100/46W4150...
Page 31
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 13P Connector Assy Routing Dress 13P Conn Assy in Slide Clamps as shown (2 Places). KDL-40W4100/46W4100/46W4150...
Page 32
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 5P Connector Assy Routing KDL-40W4100/46W4100/46W4150...
Page 33
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY TCON Power Routing/Dressing Apply LCD Tape as shown to 4P TCON Power Conn Assy. Apply Sheet Core C Over sharp edge of VESA Bracket. Route wires in Slide Clamp (2Places) KDL-40W4100/46W4100/46W4150...
Page 34
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY SWITCH UNIT ROUTING/DRESSING KDL-40W4100/46W4100/46W4150...
Page 35
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY SWITCH UNIT ROUTING/DRESSING (CONTINUED) NEW WIRE UTING/DRESS DETAILS Route Switch Unit Cables UNDER 5P Conn. Assy. Use BLK UL Tape on harness as Reference to apply Tape(LCD). Total Tape(LCD) qty. change 9Æ10 Switch Unit wires CANNOT Touch 13P Power Conn Assy.
Page 36
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LVDS Cable Routing 40W4100 LVDS Cable has ONE WHITE UL TAPE Band CAUTION: DO NOT USE LVDS cable screw hole to the left. Attach LVDS cable to Hole ABOVE connector. Apply 3x8mm screw to secure LVDS metal...
Page 37
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY LVDS Cable Routing CAUTION DO NOT this hole to secure LVDS cable. Location of correct screw hole to use for LVDS cable. MAIN BRACKET KDL-40W4100/46W4100/46W4150...
Page 38
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY INSTALLATION PROCEDURE FOR MDF-61 CONNECTOR STEP1: ALIGN CONNECTOR STEP3: PUSH DOWN ON BLACK STEP2: INSTALL CONNECTOR LOCK TAB TO SEAT CONNECTOR. WHEN CONNECTOR IS SEATED IT WILL “CLICK” INTO PLACE. “HRS” LOGO WILL BE VISIBLE WHEN STEP4: PULL LOCK BLACK LOCK CONNECTOR IS PROPERLY LOCKED.
Page 39
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY High Voltage MDF-61 Wire Dressing MDF- 61 (NEW) CONNECTOR 1-835-147-11; 310mm Length Installation: Align connector in header Push Black Button on top of Conn. Confirm Conn. “snaps” in firmly. Slide BLACK locking latch in direction printed on the PWB silk (circled RED in photo) Dress H.V.
Page 40
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY High Voltage MDF61 CAUTION Use Sheet Core C to hold H.V. wire Away from metal PWB clip. (NO TOUCH) KDL-40W4100/46W4100/46W4150...
Page 41
KDL-40W4100/46W4100/46W4150 KDL-40W4100 ONLY 2P AC Inlet LOOP AC Inlet Wires around Side Clamp KDL-40W4100/46W4100/46W4150...
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/ CENTER Main Harness on panel Speaker Harness RED UL Tape is positioned under boss on panel and above slot in panel bottom. KDL-40W4100/46W4100/46W4150...
Page 43
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness Apply harness to Panel TOP edge. To center Harness, position RED UL tape over center of panel. Use screw on panel as Reference where center of panel is. Apply Sheet core C over Red UL tape once harness is centered. Apply Sheet Core C over Black UL Tape on Harness (guides).
Page 44
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness: Lighted SONY Logo Apply LCD Tape over panel sharp edge. KDL-40W4100/46W4100/46W4150...
Page 45
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY H Boards/Speaker Harness: Continued Apply Sheet Core C to Main Harness as shown. KDL-40W4100/46W4100/46W4150...
Page 46
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness Apply Sheet Core C to Harness. Use BLACK UL TAPE on Harness as guide where to apply Sheet Core C. Apply LCD Tape over Speaker. DO NOT block the hole in the speaker with the tape.
Page 47
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness – Attach H3/H4 Conn. Apply LCD Tape over panel sharp edge. H4-Bd KDL-40W4100/46W4100/46W4150...
Page 48
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Combination H Boards/Speaker Harness: H3-Bd routing Keep wires from Crossing over edge of Bezel (pinch point) KDL-40W4100/46W4100/46W4150...
Page 49
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Balancer Board Cable Routing Route wires just under Plastic peg Fix 9P harness with Sheet Core C. on panel as shown. NOTE: Make sure wires are not pulling or Wires are routed UNDER Spine Frame Causing stress on connector.
Page 50
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY LEFT Speaker Harness Dressing Apply LCD tape to secure Left Speaker wires. Dress speaker wires in Slide Clamp as shown. No Need to apply LCD Tape over speaker. KDL-40W4100/46W4100/46W4150...
Page 51
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY BU Board Support Bracket Dress harness in slide clamps as shown (4 places). KDL-40W4100/46W4100/46W4150...
Page 52
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY CAUTION: BU Board Support Bracket Dress 30P Harness as shown to keep CAUTION JIG connectors CLEAR of obstructions. KDL-40W4100/46W4100/46W4150...
Page 53
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 13P Connector Assy Routing Dress 13P Conn Assy in Slide Clamps as shown (2 Places). KDL-40W4100/46W4100/46W4150...
Page 54
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 5P Connector Assy Routing Dress 5P Conn Assy in Slide Clamp as shown KDL-40W4100/46W4100/46W4150...
Page 55
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Use Tape, LCD Route wires in 4P TCON Power Routing Slide Clamp KDL-40W4100/46W4100/46W4150...
Page 56
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Switch Unit Routing/Dressing Use Tape, LCD Dress Switch Unit wire together With 4P TCON Power Harness. Dress Switch Unit wire inside Slide Clamp KDL-40W4100/46W4100/46W4150...
Page 57
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Switch Unit Routing/Dressing: Part II Dress Switch Unit wire inside Slide Clamps (2 Places). KDL-40W4100/46W4100/46W4150...
Page 58
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY LVDS Cable Routing 46W4100 LVDS Cable has TWO WHITE UL TAPE Band Dress LVDS Cable in Slide Clamp Apply 3x5mm screw to secure LVDS metal tab to panel. Apply 3x8mm screw to secure LVDS metal tab to main bracket.
Page 59
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY High Voltage MDF61 SPACER applies to 1-802-673-11 Panel ONLY (STOP USING SPACER when suffix change to -12) KDL-40W4100/46W4100/46W4150...
Page 60
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY INSTALLATION PROCEDURE FOR MDF-61 CONNECTOR STEP1: ALIGN CONNECTOR STEP3: PUSH DOWN ON BLACK STEP2: INSTALL CONNECTOR LOCK TAB TO SEAT CONNECTOR. WHEN CONNECTOR IS SEATED IT WILL “CLICK” INTO PLACE. “HRS” LOGO WILL BE VISIBLE WHEN STEP4: PULL LOCK BLACK LOCK CONNECTOR IS PROPERLY LOCKED.
Page 61
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY Balancer Board HIGH VOLTAGE Wire Dressing MDF- 61 (NEW) CONNECTOR 1-835-148-11; 395mm Length Installation: Align connector in header Push Black Button on top of Conn. Confirm Conn. “snaps” in firmly. Slide BLACK locking latch in direction printed on the PWB silk (circled RED in photo) Dress H.V.
Page 62
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY High Voltage MDF61 CAUTION NO metal PWB cover on corner of PWB. Make sure cable is dressed Away from screw on corner. (NO TOUCH) KDL-40W4100/46W4100/46W4150...
Page 63
KDL-40W4100/46W4100/46W4150 KDL-46W4100/46W4150 ONLY 2P AC Inlet LOOP AC Inlet Wires around Side Clamp Apply Sheet Core C over metal Sharp Edge. KDL-40W4100/46W4100/46W4150...
KDL-40W4100/46W4100/46W4150 SECTION 2: SERVICE ADJUSTMENTS 2-1. VIEWING SERVICE ADJUSTMENT DATA The fi rst service menu (TV) displays. There are no adjustments necessary for these models. All data has TVLF CHECK SERVICE been set for optimal viewing for our customers. The following sections...
KDL-40W4100/46W4100/46W4150 2-4. USING THE REMOTE COMMANDER TO VIEW SERVICE DATA TV POWER Use the buttons on the Remote Commander to access the service menu items and adjust the data values. 1. Access Service Mode. Press the following buttons on the Remote Commander within a...
KDL-40W4100/46W4100/46W4150 SECTION 3: DIAGRAMS 3-1. CIRCUIT BOARDS LOCATION SWITCH UNIT IP5Z POWER UNIT ILLUMINATION MODULE 3-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in μF unless otherwise noted. pF : μμF 50WV or All voltages are in V.
Page 67
KDL-40W4100/46W4100/46W4150 REFERENCE INFORMATION Terminal name of semiconductors in silk screen printed circuit ( RESISTOR CAPACITOR : RN METAL FILM : TA TANTALUM Circuit Device Printed symbol Terminal name : RC SOLID : PS STYROL Collector Transistor : FPRD NONFLAMMABLE CARBON...
KDL-40W4100/46W4100/46W4150 3-3. BLOCK DIAGRAM Rear Inputs YOUT for Slicer FHD Panel with HFR Digital Video for ATSC ITU-R BT.656 LVDS x245 x245 CXD9937GB CXD9937GB CVBS for PAP ITU-R BT.1120 Video SW Video SW S + Video1 ( 18h ) CXA2241...
Page 89
KDL-40W4100/46W4100/46W4150 IP5Z [POWER] CONDUCTOR SIDE (KDL-40W4100 ONLY) D I M M E R B A C K - L I G H T - O N / O F F R 6 3 3 3 I N V - E R R...
Page 93
KDL-40W4100/46W4100/46W4150 IP5Z [POWER, INVERTER] CONDUCTOR SIDE (KDL-46W4100/46W4150 ONLY) D I M M E R B A C K - L I G H T - O N / O F F R 6 3 3 3 I N V - E R R...
See Appendix A: Encryption Key Components in the back of this manual. 4-2. CHASSIS (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 2-580-629-01 SCREW, +BVST 3X8 (KDL-46W4100/46W4150 ONLY)
The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure” on Page 38 for KDL-40W4100 and Page 60 for KDL-46W4100/46W4150. (40-SPINE, MAIN BRKT)
See Appendix A: Encryption Key Components in the back of this manual. 4-4. BEZEL ASSEMBLY AND LCD PANEL (KDL-40W4100 ONLY) (Check the Sony Electronics Service Information website for any additional service related issues for this model.)
See Appendix A: Encryption Key Components in the back of this manual. 4-5. BEZEL ASSEMBLY AND LCD PANEL (KDL-46W4100/46W4150 ONLY) (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 2-580-640-01 SCREW, +BVTP2 4X16...
Page 108
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
Page 109
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
Page 110
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e.
Page 119
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
Page 120
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
Page 121
KDL-40W4100/46W4100/46W4150 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only IP5Z que par une piece portant le numero specifi e.
Page 122
METAL CHIP 1/10W R6708 1-216-833-11 METAL CHIP 1/10W R6531 1-246-388-11 METAL R6714 1-216-834-11 METAL CHIP 1/10W R6533 1-246-388-11 METAL (KDL-40W4100 ONLY) R6534 1-216-833-11 METAL CHIP 1/10W R6714 1-216-834-11 METAL CHIP 1/10W R6541 1-208-820-11 METAL CHIP 0.50% 1/10W (KDL-46W4100/46W4150 ONLY) R6542 1-216-845-11...
Page 123
0.50% 1/10W R6795 1-216-841-11 METAL CHIP 1/10W R6751 1-218-881-11 METAL CHIP 0.50% 1/10W R6796 1-218-827-11 METAL CHIP 0.50% 1/10W (KDL-40W4100 ONLY) (KDL-40W4100 ONLY) R6751 1-218-881-11 METAL CHIP 0.50% 1/10W R6796 1-218-827-11 METAL CHIP 0.50% 1/10W (KDL-46W4100/46W4150 ONLY) (KDL-46W4100/46W4150 ONLY) R6752...
MUST BE RETURNED to Sony. b) and if the core charge is NOT covered under the product warranty, the defective un-repaired or modifi...
Page 126
In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to the Service Promotion Department at Service_Promotion@am.sony.com.