Table of Contents
Advertisement
Screws
Removing the screws
8 Remove the two screws from the memory slot.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to dis-
charge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
Inserting the memory module
9 Carefully place the module in the slot. Line up the connec-
tor on the module with the connector in the computer.
Part I: Getting To Know Your Computer
Let's Start at the Very Beginning...
Adding Memory (Optional)
19
Advertisement
Chapters
Table of Contents
