SERVICE MANUAL BG-3R CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KV-XA29M66 RM-953 Singapore SCC-U39A-A PIC MODE -/-- PIP PROGR ENTER FAVORITE PIP PROGR SOUND MODE SURROUND TRINITRON COLOR TV ® http://cxema.ru...
Page 2
CARBON PAINTED ON THE CRT, AFTER REMOVING THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE ANODE. THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. – 2 –...
KV-XA29M66 RM-953 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automatically begin to flash. The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference.
Page 5
KV-XA29M66 RM-953 2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT Diagnostic Item Flash Count* 2 times +B overcurrent/overvoltage 2 times Vertical deflection stopped 3 times White balance failure 5 times Lamp ON 0.3 sec. * One flash count is not used for self-diagnostic.
Page 6
KV-XA29M66 RM-953 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs.
Page 7
KV-XA29M66 RM-953 Using Your New TV – 7 – http://cxema.ru...
Page 8
KV-XA29M66 RM-953 Using Your New TV – 8 – http://cxema.ru...
Page 9
KV-XA29M66 RM-953 Using Your New TV – 9 – http://cxema.ru...
Page 10
KV-XA29M66 RM-953 Using Your New TV – 10 – http://cxema.ru...
Page 11
KV-XA29M66 RM-953 Using Your New TV – 11 – http://cxema.ru...
KV-XA29M66 SECTION 3 RM-953 ADVANCE OPERATION 3-1. "RESET" FUNCTION 1. Purpose If a customer faces some setting problem that cannot be solved, using the "RESET" function some items will be reset to its original setting (shipment condition) 2. How to Operate The way to access to the "RESET"...
KV-XA29M66 SECTION 4 RM-953 SET-UP ADJUSTMENTS • The following adjustments should be made when a complete Perform the adjustments in the following order : realignment is required or a new picture tube is installed. 1. Beam Landing • These adjustments should be performed with rated power 2.
Page 33
KV-XA29M66 RM-953 4-2. CONVERGENCE Preparation : • Before starting this adjustment, adjust the focus, horizontal size and vertical size. • Receive dot/hatch signal. Purity • Pic mode: Personal (Pic 90%, Brightness 50%, Col 50 %, Hue 50%, Shp 50%). BMC (Hexapole)
KV-XA29M66 RM-953 BMC (Hexapole) Magnet. Blue Neck assy Neck assy If the red, green and blue dots are not balanced or aligned, then use the BMC magnet to adjust in the manner described below. Blue VM1 board VM1 board Note 1.
KV-XA29M66 RM-953 Rotate TLV-2 VOL (29”, 34”) on DY 4-3. FOCUS ADJUSTMENT Rotate TLV VOL (25”) on DY FOCUS adjustment should be completed before W/B adjustment. XCV Rotate XCV Adj core on DY YCH Rotate YCH VOL on DY (Except 34")
KV-XA29M66 RM-953 2. WHITE BALANCE ADJUSTMENT 4-4. G2 (SCREEN) AND WHITE BALANCE 1) Set to Service Mode (Refer Section 5-1: ADJUSTMENTS ADJUSTMENTS WITH COMMANDER). 1. G2 (SCREEN) ADJUSTMENT 2) Input white raster signal. 1) Set the PICTURE to normal. 3) Set the PICTURE to minimum.
KV-XA29M66 SECTION 5 RM-953 CIRCUIT ADJUSTMENTS 5-1. ADJUSTMENTS WITH COMMANDER 5-2. ADJUSTMENT METHOD Service adjustments to this model can be performed using the sup- Item Number 00 of device GEO plied Remote Commander RM-953 This explanation uses H-Position as an example.
Page 41
KV-XA29M66 RM-953 ITEM INFORMATION No. OPB0 OP1 Item XTAL 4.43 XTAL 3.58 SECAM 2nd. Lang KV-XA29M66 No. OPB1 OP2 APPLICABLE FOR XF-L (14" AND 21") MODELS ONLY AV Input Item NICAM HDEV Thai Bil Dis Fav. DVD Input KV-XA29M66 AV Input...
KV-XA29M66 RM-953 5-3. PICTURE QUALITY ADJUSTMENTS 5-4. DISPLAY POSITION ADJUSTMENT PIP POSITION SUB COLOR ADJUSTMENT (KV-XA25/XA29) 1. Input a PAL color-bar. 1. Select Video. 2. Press PIP button of the remote commander to set the PIP 2. Input a PAL color-bar.
KV-XA29M66 RM-953 NORMAL MODE (60Hz) 5-6. A BOARD ADJUSTMENT AFTER IC003 11. Input 525/60Hz signal. (MEMORY) REPLACEMENT 12. Using the 1 and 4 buttons select category GEO (Service Mode). Enter to Service Mode. Press commander buttons 5 and - (Data Initialize), and 13.
KV-XA29M66 SECTION 7 RM-953 EXPLODED VIEWS NOTE: • • Items marked " ∗ " are not stocked since Items with no part number and no The components identified by description are not stocked because they are seldom required for routine...
KV-XA29M66 SECTION 10 RM-953 The components identified by shading ELECTRICAL PARTS LIST and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK NOTE: • Items marked " ∗ " are not stocked since they •...
Page 82
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK C503 1-126-964-11 ELECT 10UF 20.00%50V C604 1-163-009-11 CERAMIC CHIP 0.001UF...
Page 83
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK CN201 * 1-564-508-11 PLUG, CONNECTOR 5P D522 8-719-028-45...
Page 84
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK FB605 1-412-911-31 FERRITE <COIL> FB606 1-412-911-31 FERRITE FB608...
Page 85
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK Q507 8-729-216-22 TRANSISTOR 2SA1162-G R058 1-216-295-11 SHORT Q509...
Page 86
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R351 1-216-053-00 RES-CHIP 1.5K 1/10W R540 1-216-065-91 RES-CHIP 4.7K...
Page 87
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R609 1-216-057-00 RES-CHIP 2.2K 1/10W <TRANSFORMER> R610 1-216-073-00...
Page 88
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK C1414 1-164-346-11 CERAMIC CHIP C3217 1-104-665-11 ELECT 100UF 20.00%25V...
Page 89
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK C3276 1-115-185-11 CERAMIC CHIP 0.033UF 10.00%50V D3201 8-719-988-61...
Page 90
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK L1405 1-414-856-11 INDUCTOR 10UH R1402 1-216-033-00 RES-CHIP 1/10W...
Page 91
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R1464 1-216-113-00 RES-CHIP 470K 1/10W R3216 1-216-129-00 RES-CHIP 2.2M...
Page 92
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R6219 1-216-089-11 RES-CHIP 1/10W D706 8-719-911-19 DIODE 1SS119-25...
Page 93
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R718 1-249-405-11 CARBON 1/4W * A-1343-946-A D3 BOARD MOUNTED...
Page 94
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R2806 1-249-421-11 CARBON 2.2K 1/4W * A-1372-887-A H BOARD MOUNTED...
Page 95
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R3902 1-247-804-11 CARBON 1/4W D2414 8-719-070-16 DIODENNCD9.1A-T1 R3904...
Page 96
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK C4340 1-163-038-11 CERAMIC CHIP 0.1UF <FERRITE BEAD> C4341...
Page 97
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK Q4314 8-729-216-22 TRANSISTOR 2SA1162-G R4333 1-216-025-11 RES-CHIP 1/10W...
Page 98
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R4515 1-216-041-00 RES-CHIP 1/10W C822 1-163-009-11 CERAMIC CHIP 0.001UF...
Page 99
KV-XA29M66 RM-953 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK R805 1-216-295-11 SHORT C5907 1-107-638-11 ELECT 33UF 20.00%160V...
Page 100
COIL, NA ROTATION (RT200) 4-978-977-01 BATTERY COVER, REMOTE COMMANDER ! 1-467-525-21 CAP BLOCK, HIGH-VOLTAGE 1-529-190-11 SPEAKER (5CM) 1-529-563-11 SPEAKER (15X6.5CM) Sony Corporation English 2000HM70024-1 Sony Technology Malaysia Sdn. Bhd. Printed in Malaysia 9-872-216-01 Visual Entertainment General Area 2000.8 – 124 – http://cxema.ru...