Table of Contents
Advertisement
Administration
File Management
STEP 5
STEP 1
STEP 2
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
-
Startup Configuration—The configuration file saved to flash memory.
This file does not include any configuration changes applied in RAM but
not yet saved to the switch.
-
Backup Configuration—An additional configuration file saved on the
switch for use as a backup. The administrator can copy the Backup
Configuration file to the Startup Configuration file type, then reboot the
switch to use the Backup Configuration file.
-
Mirror Configuration—If the Running Configuration is not modified for at
least 24 hours, it is automatically saved to a Mirror Configuration file type,
and a log message with severity alert is generated to indicate that a new
mirror file is available. This feature allows the administrator to view the
previous version of the configuration before it is saved to the Startup
Configuration file type or to copy the Mirror Configuration file type to
another configuration file type. If the switch is rebooted, the Mirror
Configuration is reset to the factory default parameters.
-
Flash Log—Log of events saved to flash memory.
-
Operational Log—Log of events in RAM that are not saved to the Startup
Log.
-
Startup Log—The first 32 messages logged when the switch is booted.
Subsequent messages are logged into the Operational Log. The Startup
Log is not aged out; it retains the messages until the switch is rebooted.
Click Apply.
For HTTP backups, you are prompted to browse to a location to save the file. A
progress bar indicates the status of the file transfer.
Delete Configuration
The Delete Configuration page enables you to delete the Startup configuration or
the Backup configuration. If you delete both the startup and the backup
configuration files, when the switch reboots it will use the default configuration file.
To delete the Startup or Backup Configuration file:
Click Administration > File Management > Delete Configuration in the navigation
window.
Select the Startup Configuration or Backup Configuration file type.
4
56
Advertisement
Table of Contents
