Table of Contents
Advertisement
Administration
System Logs
STEP 3
STEP 4
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
Log Aggregation Interval—If Log Aggregation is enabled, specify the
interval in seconds. Consecutive messages that are received within this
interval will be aggregated into a single log message. The range is 15
seconds to 120 seconds.
•
RAM Memory Logging—Select to enable logging in RAM.
•
Flash Memory Logging—Select to enable logging in flash memory.
•
Flash Log Size—Enter the maximum number of log messages to store in the
flash memory log.
Enable the event severity levels to be logged for each log type. The severity levels
are listed from the highest to the lowest severity, as follows:
•
Emergency—System is not usable.
•
Alert—Action is needed.
•
Critical—System is in a critical condition.
•
Error—System is in error condition.
•
Warning—System warning has occurred.
•
Notice—System is functioning properly, but a system notice has occurred.
•
Informational—Device information.
•
Debug—Provides detailed information about an event.
NOTE:
When you select a severity level, any events of that level or higher are
automatically selected for logging.
Click Apply. Your changes are saved to the Running Configuration.
4
49
Advertisement
Table of Contents
