Page 1
Blu-ray Disc Player XV-BP1 INSTRUCTIONS LVT2007-003C...
Page 2
• Consult the dealer or an experienced radio/TV techni- cian for help. As an E ® Partner, JVC has NERGY determined that this product or product models meet the E ® guide- NERGY lines for energy efficiency.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Notes on Copyrights Because AACS (Advanced Access Content System) is approved as content protection sys- tem for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restric- tions are imposed on playback, analog signal out- put, etc., of AACS protected contents.
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your player. Should the unit require service, contact an authorized service loca- tion.
Playable Discs Blu-ray Disc - Discs such as movies that can be pur- chased or rented - BD-R/RE discs that contain audio titles, MPEG4, MP3, WMA, or Photo files. DVD-VIDEO Discs such as movies that can be pur- chased or rented DVD-R - Video mode and finalized only - Supports the dual layer disc also...
BD-ROM Disc Features BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also support the highest quality HD video available in the industry (up to 1920 x 1080) - Large capacity means no compromise on video quality.
Compatibility Notes Because BD-ROM are a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility prob- lems, please contact an authorized Customer Service Center. Viewing high-definition content and up-converting standard DVD content may require an HDMI- capable input or HDCP-capable DVI input on your display device.
Using a USB Flash Drive This unit can play the movie, music and photo files contained on the USB Flash Drive. Insert/Remove a USB Flash Drive USB Flash Drive Inserting a USB Flash Drive Insert straight-in until it fits into place. Removing a USB Flash Drive Withdraw the USB Flash Drive carefully.
Front Panel a 1/' (STANDBY/ON) Button Switches the unit ON or OFF. b Disc Tray Insert a disc here. c Display Window Shows the current status of the player. d Remote Sensor Point the Remote Control here. e Z (OPEN/CLOSE) Opens or closes the disc tray.
CLEAR: Removes a mark on the search menu or a number when setting the password. JVC TV Control Buttons: • TV STANDBY/ON (1/'): Turn the TV on or off. • INPUT: Switch the TV’s input source between the TV and other input sources.
Installation and Setup HDMI connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable. 1. Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). 2.
Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below.
Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 36 for details. Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks on...
Internet connection This player can be connected to a local area net- work (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu”...
Resolution Setting The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode. Note: Since several factors affect the resolution of video output, see “Video output according to the Resolution setting”...
Available resolution according to the resolution setting • When the non-copy protected media is playing back Video Output Resolution Setting 480i 480p 720p 1080i 1080p / 24Hz 1080p / 60Hz • When the copy protected media is playing back Video Output Resolution Setting 480i 480p...
Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 19 to 23. To display and exit the Menu: Press HOME and the Home Menu appears.
[LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on- screen display. Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] – Refers to the original language in which the disc was recorded.
[LOCK] Menu (Parental Control) Use the v / V / b / B buttons to select [LOCK] set- tings in the [Setup] menu. The [LOCK] settings affect only BD and DVD play- back. Set the password and have to input it to vali- date the [LOCK] settings.
[NETWORK] Menu The [NETWORK] settings are needed to use the BD-Live features. Some BD-ROM discs may enable you to access special BD-ROM sites, if you connect the player to the Internet. For example, if an BD-ROM site includes content such as links to future movie trail- ers, you can watch the downloaded on-line content on the player.
[OTHERS] Menu Skin Changes the background of the initial screen. Java Font Size You can adjust the default text size displayed for the BD-J contents during BD-ROM playback. This setting is only valid when BD-J contents do not set the size of text. Please select a font size bigger than 24 when the player is connected with an HD TV.
Operations General playback features 1. Load your chosen disc in the tray, with the playback side down. 2. Start playback using the HOME menu (see page 10). Buttons Operations OPEN / CLOSE (Z) Opens or closes the disc tray. N (PLAY) Starts the playback.
Page 25
General playback features (Continued) Buttons Operations REPEAT Playing repeatedly: During playback, press REPEAT repeatedly to select a desired repeat mode. DVD, BD, AVCHD: Chapter/Title/Off Audio CD, MP3, WMA, MPEG4: Track/All/Off Note: If you press > once during Repeat Chapter/Track playback, the repeat playback cancels. Repeating a specific portion (A-B): During playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press...
If a disc menu screen is displayed MPEG4 AVCHD The menu screen may be displayed first after loading a disc which contains a menu. Use b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start play- back.
Using Color (R, G, B, Y) Buttons These buttons are available only during BD-J contents playback. Use the appropriate buttons as indicated by the display. Depending on the disc contents, the functions of each button may differ. Screen Saver The screen saver appears when you leave the play- er in Stop mode for about five minutes.
Enjoying BD-LIVE™ or BONUS VIEW™ in BD-Video This unit allows you to enjoy functions such as pic- ture-in-picture, secondary audio and Virtual pack- ages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). In addition to the BONUSVIEW function, BD-Video supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as...
Playing a DVD VR Format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The [MOVIE] menu appears on the TV screen. 2. Press v / V to select a title then press N (PLAY) and playback starts.
Playing a MPEG4 Movie File The player can play MPEG4 files. Before playing MPEG4 files, read “MPEG4 file requirement” on right. 1. Insert a disc containing MPEG4 files, or connect the USB Flash Drive containing MPEG4 files. 2. Press HOME and Home Menu appears. 3.
Playing an Audio CD or MP3/WMA files The player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Insert Audio CD or a disc containing MP3/WMA files, or connect the USB Flash Drive containing MP3/WMA files 2.
Viewing a Photo file This unit can play photo files. Before playing photo files, read “Photo file requirement” on below. 1. Insert a disc containing photo files, or connect the USB Flash Drive containing photo files. 2. Press HOME and Home Menu appears. 3.
Reference Language Codes Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Ameharic 6577 Galician Arabic 6582...
Troubleshooting Symptom No power. • The power cord is disconnected. The power is on, but • No disc is inserted. the player does not work. No picture. • The TV is not set to receive video signal output. • The video cable is not connected securely.
Specifications General Power requirements: Power consumption: Dimensions (W x H x D): Net Weight (Approx.): Operating temperature: Operating humidity: Outputs VIDEO OUT: COMPONENT VIDEO OUT: HDMI OUT (video/audio): ANALOG AUDIO OUT: DIGITAL OUT (COAXIAL): DIGITAL OUT (OPTICAL): System Laser: Signal system: Frequency response: Signal-to-noise ratio: Harmonic distortion:...