Normal Router Startup Sequence; Identifying Startup Issues - Cisco ASR 9000 Series Installation Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Chapter 4
Troubleshooting the Installation
Table 4-1
Type of Subsystem
Cooling subsystem
Cisco ASR 9010 Router
Cisco ASR 9006 Router
Cisco ASR 9904 Router
Cisco ASR 9912 Router
Cooling subsystem
Cisco ASR 9922 Router
Note
There are two types of image files, -P PIE files, and x86-based -PX PIE files. -P PIE files are for use on
Cisco ASR 9000 Series Routers with RSP route switch processors (RSP-4G and RSP-8G). -PX PIE files
are for use on the routers with RSP-440 route switch processors and the Cisco ASR 9922 Router route
processors.
Normal Router Startup Sequence
You can generally determine when and where the router failed during the startup sequence by checking
the status LEDs on the power modules, and the alphanumeric displays on the RSP, RP, and line cards.
In a normal router startup sequence, the following sequence of events and conditions occur:
1.
2.
3.
Identifying Startup Issues
Table 4-2
LED states on the power modules (AC or DC) and the fan tray after a successful system startup.
For the RSP/RP card to communicate properly to a power module in a power tray, the appropriate input
Note
power should be present.
Subsystem Descriptions for the Cisco ASR 9000 Series Routers (continued)
The fan in each power module receives power and begins drawing air through the power supply.
The power module input power and output power indicators are on.
The fans in the fan tray receive power and begin drawing air through the chassis.
The fan tray OK indicator is on.
As the power-on and boot process progresses for the RSP/RP, the status of the RSP/RP appears on
the alphanumeric display on the front panel of the card.
shows the contents of the alphanumeric displays on the RSP/RP card, as well as the normal
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Description
Consists of one or two fan trays, which circulate air through the
card cage to cool the cards, and two fans in each of the power
modules, which circulate cooling air through the power
module.
Consists of four fan trays, which circulate air through the top
and bottom line card cages to cool the cards, and two fans in
each of the power modules, which circulate cooling air through
the power module.
Troubleshooting Overview
4-3
- Quick Links:
- Power Connection Guidelines
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
