CD-R Print Guide Table of Contents Preface Introduction Printing on CD-Rs/DVD-Rs (CD-R Direct Print) Items to Prepare Cautions When Printing on CD-Rs/DVD-Rs Attaching the CD-R Tray Removing the CD-R Tray Printing on CD-Rs/DVD-Rs - Windows Printing on CD-Rs/DVD-Rs - Macintosh...
Read the following cautions and instructions when printing on CD-Rs or DVD-Rs: • Be sure to use the CD-R Tray which is supplied with this printer, and has a “B” on the upper side. • Do not print on CD-Rs/DVD-Rs that are not compatible with ink-jet printing. The ink may not dry and will prevent subsequent use.
• The CD-R may become dirty if software other than CD-LabelPrint or Easy-PhotoPrint is used. • Be sure to use the supplied 8 cm CD-R Adapter when printing on 8 cm CD-Rs. Attaching the CD-R Tray Preparing the CD-R Tray Feeder...
Page 6
Placing the CD-R/DVD-R on the CD-R Tray When placing the CD-R/DVD-R on the CD-R Tray, do not touch the printing surface of the disc or the reflectors on the CD-R Tray. Place the disc on the CD-R Tray with the printable surface facing up.
Page 7
• When printing on the CD-R with the bundled application, do not place the CD-R Tray until a message asking you to insert the CD-R Tray appears on your PC. • If the CD-R Tray is inserted before the printer is ready, it may be ejected. If this happens, insert it again according to the on-screen instructions.
When removing the 8 cm CD-R, remove the adapter first, and then remove the disc from the tray. When you don’t use the CD-D Tray, keep it in a place where it won’t be bent. Or, it may not function...
To access the manual from the Start menu, click All Programs (or Programs for Windows Me/Windows 2000/Windows 98/Windows 95), CD-LabelPrint, and select Manual. Importing the image to print on the CD-R/DVD-R Click Start, select All Programs (or Programs), CD-LabelPrint, and then CD-LabelPrint to start CD-LabelPrint.
• The Printable Label image on the Print CD Labels dialog box shows the print image of the CD-R Tray (rectangle) and the CD-R (circles). The leading edge of the CD-R Tray is at the bottom of the image. • If the “Dark” setting produces unsatisfactory results (e.g., if images are too dark or characters...
Page 11
Insert the CD-R Tray as instructed in the message and then click OK. • Do not close the CD-R Tray Feeder during printing on the CD-R. • Refer to the CD-LabelPrint’s manual for more information about CD-LabelPrint.
CD-LabelPrint’s manual for more information about this procedure. To access the manual, double-click the Manual folder in the CD-LabelPrint folder, and then double-click Manual. Importing the image to print on the CD-R/DVD-R Select Applications from the GO menu. Double-click the CD-LabelPrint folder, and then CD-LabelPrint to start CD-LabelPrint.
Page 13
The Printable Label image on the Print Label Sheet dialog box shows the print image of the CD-R Tray (rectangle) and the CD-R (circles). The leading edge of the CD-R Tray is at the bottom of the image. When the confirmation message appears, click OK.
Page 14
(others). Print quality on CD-R/DVD-R may vary depending on the media you use. Click Print. If the CD-R Tray is previously inserted, it may be ejected. In such a case, wait until the message in step 10 appears. Insert the CD-R Tray and press the...
If printing CD-R/DVD-R with Detects a printable disc on the CD-R tray cleared, the printing may be started even if a CD-R or DVD-R is not placed on the CD-R Tray. Selecting the check box prevents CD-R Tray from being falsely printed.
Possible Cause Try This CD-R Tray or CD-R/ Ensure that the CD-R Tray supplied with this printer (“B” is on the upper side) is in DVD-R not in place place. Correctly attach the CD-R Tray or load CD-R/DVD-R, and press the RESUME/CANCEL button.
Possible Cause Try This “Error No: 1001”* CD-R Tray not in Ensure that the CD-R Tray supplied with this printer (“B” is place on the upper side) is in place. Correctly attach the CD-R Tray, and press the RESUME/ CANCEL button.
When a printer error occurs, the POWER lamp flashes. The number of flashes indicates the type of error. Count the flashes and take the appropriate action to correct the error. This section deals with errors on the CD-R Tray only. For other errors, refer to the User’s Guide. Number of...