Pwba Exit Motor - Epson EPL-N3000 Service Manual

A4 monochrome laser printer

Hide thumbs Also See for EPL-N3000:

Table of Contents

EPSON EPL-N3000/AcuLaser M4000N

4.10.2 PWBA EXIT MOTOR

Remove the COVER REAR 500. (p.270)

Remove the COVER REAR. (p.167)

Remove the COVER LEFT. (p.169)

Disconnect the harnesses from the connectors (P/J101, P/J102, P/J103) of the

PWBA EXIT MOTOR.

Remove the two screws (silver, 6mm) securing the PWBA EXIT MOTOR to the

Remove the PWBA EXIT MOTOR.

Installation

Install the PWBA EXIT MOTOR to the frame with the two screws (silver, 6mm).

Connect the connectors (P/J101, P/J102, P/J103) of the harnesses to the connectors

of the PWBA EXIT MOTOR.

Install the COVER LEFT. (p.169)

Install the COVER REAR. (p.167)

Pay attention to the difference between the two types of screws and

C A U T I O N

use them at their correct positions respectively.

Install the COVER REAR 500. (p.270)

Disassembly and Assembly

Figure 4- 93. PWBA EXIT MOTOR Removal

PWBA EXIT MOTOR

Confidential

Show Quick Links

Table of Contents

Aculaser m4000n