Sony MSW-A2000 Operation Manual page 118
Digital videocassette player
Hide thumbs
Also See for MSW-A2000:
- Operation manual (146 pages) ,
- Installation manual (34 pages) ,
- Operation manual (28 pages)
Table of Contents
Advertisement
To display a desired sub-item
For a menu item having sub-items, you can select a
desired sub-item as follows.
1
With a desired menu item selected, press the F2
(SELECT) button.
The currently selected sub-item name flashes.
2
Turn the MULTI CONTROL knob to select a
desired sub-item.
Changing menu item setting values
The procedures for changing menu item setting values
or sub-item setting values are described below.
To change the settings of menu items without
sub-items
After selecting a desired menu item using the
procedure described in the section "Displaying a
desired menu item" on page 12-2 and with the menu
item number flashing, proceed as follows.
1
Press the F2 (SELECT) button.
The current setting of the menu item flashes.
2
Press the F3 (–) button or F4 (+) button, or turn the
MULTI CONTROL knob to select a desired
setting value.
To select another menu item and change its
setting value
Press the F1 (RETURN) button making the current
menu item number flash, then perform the
procedures for selecting a desired menu item and
changing its setting value.
3
When all required changes have been made, press
the F5 (SET) button.
This makes the new settings effective.
To abandon making changes and exit from the
setup menu display
Press the F6 (EXIT) button.
To change the settings of menu items with
sub-items
When a selected menu item has sub-items, select a
desired sub-item using the procedure described in the
section "To display a desired sub-item" on this page
making the sub-item name flash, then proceed as
follows.
1
Press the F2 (SELECT) button.
The current setting of the sub-item flashes.
2
Press the F3 (–) button or F4 (+) button, or turn the
MULTI CONTROL knob to select a desired
setting value.
To select another sub-item and change its
setting value
Press the F1 (RETURN) button making the current
sub-item name flash, then perform the procedures
for selecting a desired sub-item and changing its
setting value.
To select another menu item and change its
setting value
Press the F1 (RETURN) button twice in succession
making the current menu item number flash, then
perform the procedures for selecting a desired
menu item and changing its setting value.
3
When all required changes have been made, press
the F5 (SET) button.
This makes the new settings effective.
To abandon making changes and exit from the
setup menu display
Press the F6 (EXIT) button.
12-3
Chapter 12 Setup Menus
- Quick Links:
- Features
- Error Messages
Hide quick links:
Advertisement
Table of Contents
