4 Replacement Procedures
4.26 Camera module
Removing the Camera module
To remove the camera module, follow the steps below and refer to Figure 4-49.
1. Turn up the insulator and disconnect the camera harness from the connector on the
camera module.
2. Take out the camera module from the slot of the LCD cover.
NOTE: Do not reuse the removed camera module. Be sure to use a new camera module.
4-82
[CONFIDENTIAL]
Camera module
Figure 4-49 Removing the camera module
Insulator
Camera harness
PORTÉGÉ R700 Maintenance Manual (960-833)
4.26 Camera module