Table of Contents
Advertisement
Using New Configuration
When a RAID set is already existing, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option:
1.
From the utility main menu, highlight Configure, then press <Enter>.
2.
Use the arrow keys to select New Configuration, then press <Enter>.
3.
Follow steps 3 to 7 of the previous section.
4.
Select Size from the Logical Drive menu, then press <Enter>.
5.
Key-in the desired logical drive size, then press <Enter>.
6.
Follow steps 8 to 13 of the previous section to create the RAID set.
6-10
Chapter 6: RAID configuration
Advertisement
Table of Contents
