Configuring Cos Settings - Cisco RV215W Administration Manual
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (140 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Configuring Quality of Service (QoS)
Configuring CoS Settings
STEP 3
STEP 4
Configuring CoS Settings
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
For each port in the 3G QoS Port-Based Settings table, enter this information:
Trust Mode
Default Traffic
Forwarding Queue for
Untrusted Devices
Click Save.
To restore the default port-based QoS settings, click Restore Default, and click
Save.
Use the link to the QoS Port-Based Settings Page to map the CoS priority setting
to the QoS queue.
To map CoS priority settings to the traffic forwarding queue:
Choose QoS > CoS Settings.
Choose the Ethernet or 3G radio button.
For each CoS priority level in the CoS Settings Table, choose a priority value from
the Traffic Forwarding Queue drop-down menu.
Choose one of the following options from the drop-
down menu:
•
Port—This setting enables the port based
on QoS. You can then set the traffic priority
for a particular port. The traffic queue
priority starts at the lowest priority of 1 and
ends with the highest priority of 4.
•
DSCP—Differentiated Services Code Point
(DSCP). Enabling this feature prioritizes the
network traffic across the LAN based on the
DSCP queue mapping on the DSCP
Settings page.
•
CoS—Class of Service (CoS).
Choose a priority level for outbound traffic (1 to 4).
10
120
- Quick Links:
- Verifying the Hardware Installation
Hide quick links:
Advertisement
Table of Contents
