Introduction
About this guide
About this guide
This guide has been divided into several sections, providing conceptual, configuration and reference
information about the various features and capabilities of the VCS. It describes a fully equipped version of the
VCS. Your version may not have all the described extensions installed.
Most configuration tasks on the VCS can be performed by using either the web interface or a command line
interface (CLI). This guide mainly describes how to use the web interface. Some VCS features are only
available through the CLI and these are described as appropriate, including the relevant CLI command.
In this guide, instructions for performing a task using the web interface are shown in the format
Menu >
Submenu
followed by the
Name
of the page that you will be taken to.
Where command line interface (CLI) commands are included, they are shown in the format:
xConfiguration <Element> <SubElement>
xCommand <Command>
Related documentation
See
Related documentation [p.503]
for a full list of documents and web sites referenced in this guide.
Training
Training is available online and at our training locations. For more information on all the training we provide
and where our training offices are located, visit www.cisco.com/go/telepresencetraining.
Glossary
A glossary of TelePresence terms is available at: https://tp-tools-web01.cisco.com/start/glossary/.
Accessibility notice
Cisco is committed to designing and delivering accessible products and technologies.
The Voluntary Product Accessibility Template (VPAT) for Cisco TelePresence Video Communication Server
is available here:
http://www.cisco.com/web/about/responsibility/accessibility/legal_regulatory/vpats.html#telepresence
You can find more information about accessibility here:
http://www.cisco.com/web/about/responsibility/accessibility/index.html
Cisco VCS Administrator Guide (X8.1.1)
Page 17 of 507