Vehicle Cradle Ram Ball Assembly - Honeywell MX7 Reference Manual

Table of Contents

Vehicle Cradle RAM Ball Assembly

1. Fasten the RAM ball with the circular mounting base (shown in the middle in above photo) to the vehicle.

2. Fasten the RAM ball with the rectangular mounting base (shown on the right in above photo) to the back of the vehicle

cradle .

3. Loosen the knob on the squeeze arm (shown on the left in above photo).

4. Place either RAM ball opening in the squeeze arm over the vehicle mounted RAM ball.

5. Place the remaining RAM ball opening over the vehicle cradle mounted RAM ball.

6. Tighten the knob on the squeeze arm until the vehicle cradle is secured to the vehicle.

Adjust the position of the secured vehicle cradle by slightly loosening the squeeze arm knob, rotating the cradle and then re-

tightening the squeeze arm knob.

Periodically test the mounting device and re-tighten bolts, RAM balls and/or squeeze arm adjustment knob as needed.

4-9

Table of Contents