hit counter script
Panasonic TH-103PF12U Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-103PF12U
  6. Service manual

Panasonic TH-103PF12U Service Manual

High definition plasma display
Hide thumbs Also See for TH-103PF12U:
Table of Contents

Advertisement

Quick Links

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
2 Warning -------------------------------------------------------------- 4
2.2. About lead free solder (PbF)---------------------------- 5
3 Service Navigation ----------------------------------------------- 6
3.1. Service Hint ------------------------------------------------- 6
3.2. Applicable signals ----------------------------------------- 8
4 Specifications ----------------------------------------------------10
5 Operating Instructions-----------------------------------------11
6 Service Mode -----------------------------------------------------13
sample data) -----------------------------------------------16
7 Troubleshooting Guide ----------------------------------------17
7.1. Self Check--------------------------------------------------17
7.2. No Power ---------------------------------------------------19
7.3. No Picture --------------------------------------------------19
High Definition Plasma Display
Model No.
GPF12D Chassis
PAGE
7.4. Local screen failure-------------------------------------- 20
8 Service Fixture & Tools --------------------------------------- 21
8.1. SC jig-------------------------------------------------------- 21
9.1. Rear Cover and Board---------------------------------- 22
9.2. Location of Rear Cover screws----------------------- 23
9.3. Removal of Side Angle (L), (R) ----------------------- 25
9.4. Removal of HHH-Board -------------------------------- 26
9.5. Removal of HA-Board----------------------------------- 27
9.6. Removal of H5-Board ----------------------------------- 27
9.7. Removal of DS-Board ---------------------------------- 27
9.8. Removal of HX-Board----------------------------------- 28
9.9. Removal of DN-Board ---------------------------------- 28
9.10. Removal of PB-Board----------------------------------- 29
9.11. Removal of D-Board------------------------------------- 29
9.12. Removal of P-Board (MAIN_1) ----------------------- 29
9.13. Removal of P-Board (MAIN_2) ----------------------- 30
9.14. Removal of P-Board (SUB)---------------------------- 30
© Panasonic Corporation 2009
Unauthorized copying and distribution is a violation
of law.
Order Number ITD0911162CE
TH-103PF12U
B34 Canada: D10
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-103PF12U

Summary of Contents for Panasonic TH-103PF12U

  • Page 1: Table Of Contents

    9.13. Removal of P-Board (MAIN_2) ----------------------- 30 7.2. No Power ---------------------------------------------------19 9.14. Removal of P-Board (SUB)---------------------------- 30 7.3. No Picture --------------------------------------------------19 9.15. Removal of S1-Board and V2-Board---------------- 30 © Panasonic Corporation 2009 Unauthorized copying and distribution is a violation of law.
  • Page 2 TH-103PF12U 9.16. Removal of SU-Board ---------------------------------- 31 9.17. Removal of SM-Board ---------------------------------- 32 9.18. Removal of SD-Board ---------------------------------- 32 9.19. Removal of SC-Board----------------------------------- 33 9.20. Removal of SS2-Board -------------------------------- 34 9.21. Removal of SS3-Board -------------------------------- 35 9.22. Removal of SS-Board ----------------------------------- 35 9.23.

  • Page 3: Safety Precautions

    TH-103PF12U 1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.

  • Page 4: Warning

    TH-103PF12U 2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...

  • Page 5: About Lead Free Solder (Pbf)

    TH-103PF12U 2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

  • Page 6: Service Navigation

    TH-103PF12U 3 Service Navigation 3.1. Service Hint...
  • Page 7 TH-103PF12U Board Name Function Board Name Function Digital Signal Processor, Microcomputer Power switch Format Converter, Plasma AI Processor C1 (upper) Data drive (1) (upper) Sub-Field Processor C2 (upper) Data drive (2) (upper) Slot Interface (Audio / Video / Sync Input Switch),...

  • Page 8: Applicable Signals

    TH-103PF12U 3.2. Applicable signals...
  • Page 9 TH-103PF12U...

  • Page 10: Specifications

    TH-103PF12U 4 Specifications Power Source 200-240 V AC, 50/60Hz Power Consumption Power on 1400 W Stand-by condition Save OFF 1.2 W, Save ON 0.7 W Power off condition 0.4 W Plasma Display panel Drive method: AC type 103-inch, 16:9 aspect ratio 89.3"...

  • Page 11: Operating Instructions

    TH-103PF12U 5 Operating Instructions...
  • Page 12 TH-103PF12U Option Menu for GPF12D series GPF12D chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful for special function required customers. This should be set at the installation stage. Option menus default setting...

  • Page 13: Service Mode

    TH-103PF12U 6 Service Mode 6.1. CAT (Computer Aided Test) mode To exit the CAT mode, access the ID mode and switch off the main power. 6.1.1. IIC mode Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button on the remote control.

  • Page 14: Cd Mode

    TH-103PF12U 6.1.2. CD mode Select the CD mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 3 seconds. Memory data change To exit the CD mode, press the R button on the remote control.

  • Page 15: Ms Mode

    TH-103PF12U 6.1.4. MS mode Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 3 seconds. To exit the MS mode, press the R button on the remote control.

  • Page 16: Iic Mode Structure (Following Items Value Is Sample Data)

    TH-103PF12U 6.2. IIC mode structure (following items value is sample data)

  • Page 17: Troubleshooting Guide

    TH-103PF12U 7 Troubleshooting Guide 7.1. Self Check 7.1.1. Display Indication 1. Self-check is used to automatically check the bus line controlled circuit of the Plasma display. 2. To get into the Self-check mode, press the volume down button on the customer controls at the bottom of the set, at the same time pressing the OFF-TIMER button on the remote control, and the screen will show.

  • Page 18: Power Led Blinking Timing Chart

    TH-103PF12U 7.1.2. Power LED Blinking timing chart 1. Subject Information of LED Blinking timing chart. 2. Contents When an abnormality has occurred to the unit, the protection circuit operates and resets to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.

  • Page 19: No Power

    TH-103PF12U 7.2. No Power First check point There are following 3 states of No Power indication by power LED. 1. No lit. 2. Green is lit then turns red blinking a few seconds later. 3. Only red is lit. 7.3.

  • Page 20: Local Screen Failure

    TH-103PF12U 7.4. Local screen failure Plasma display may have local area failure on the screen. Fig - 1 is the possible defect P.C.B. for each local area. Fig - 1...

  • Page 21: Service Fixture & Tools

    TH-103PF12U 8 Service Fixture & Tools 8.1. SC jig Purpose: To find the failure board (SC or SU/SM/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number:...

  • Page 22: Disassembly And Assembly Instructions

    TH-103PF12U 9 Disassembly and Assembly Instructions • To disassemble P.C.B., wait for 10 minute after power was off for discharge from electrolysis capacitors. • marks indicate screw positions. 9.1. Rear Cover and Board Rear Cover required to remove for each board exchange.

  • Page 23: Location Of Rear Cover Screws

    TH-103PF12U Board Name Rear Cover V3-Board A, B, C, D, E, F PB-Board P-Board (MAIN_1) P-Board (MAIN_2) P-Board (SUB) D, E HX-Board HA-Board Unnecessary DN-Board HHH-Board Unnecessary 9.2. Location of Rear Cover screws 9.2.1. Removal of Rear Cover ( A )
  • Page 24 TH-103PF12U 9.2.3. Removal of Rear Cover ( C ) , ×2 2. Remove screws (×21 ) and then remove the Rear Cover ( A ). 1. Remove screws (×19 ) and then remove the Rear Cover ( C ). 9.2.2.

  • Page 25: Removal Of Side Angle (L), (R)

    TH-103PF12U 9.2.5. Removal of Rear Cover ( E ) 2. Remove screws (×21 ) and then remove the Rear Cover ( F ). 1. Remove screws (×25 ) and then remove the Rear Cover ( E ). 9.3. Removal of Side Angle (L), (R) Note: when fixing Rear Cover ( E ) •...

  • Page 26: Removal Of Hhh-Board

    TH-103PF12U 2. Remove 19 screws and then remove the Side Angle (L). 5. Remove 4 screws (B) of the Plate. 6. Remove 19 screws and then remove the Side Angle (R). 9.3.2. Removal of Side Angle (R) 1. Disconnect the connectors (DS15, P34).

  • Page 27: Removal Of Ha-Board

    TH-103PF12U 9.5. Removal of HA-Board 3. Remove 2 screws (J). 4. Remove 1 screw (K) and then remove H5-Board. 1. Remove 4 screws (F) and then remove the HA Terminal Block. 2. Remove 4 screws (G). 3. Remove 3 screws (H) and then remove HA-Board.

  • Page 28: Removal Of Hx-Board

    TH-103PF12U 4. Disconnect the connector (DS14). 1. Remove the Slot Case. 5. Remove 10 screws and then remove the Fixed Plate (Refer to Removal of DS-Board) 2. Disconnect the connector (HX1). 3. Remove 4 Hexagonal-Head screws and 2 screws and then remove HX-Board.

  • Page 29: Removal Of Pb-Board

    TH-103PF12U 9.10. Removal of PB-Board 2. Disconnect the connectors (D3, D5, D21, D25). 3. Remove the flexible cables from the connectors (D20, D31, D32, D33, D34). 4. Remove 4 screws and then remove D-Board. 1. Disconnect the connectors (PB30, PB31, PB51, PB53, PB54, PB59, PB61, PB62, PB67, PB69, PB71).

  • Page 30: Removal Of P-Board (Main_2)

    TH-103PF12U 9.13. Removal of P-Board (MAIN_2) 9.15. Removal of S1-Board and V2- Board 1. Disconnect the connectors (CM1, CM2, CM3, CM4, P6, P11, P35). 1. Remove 2 screws ( ). 2. Remove 10 screws and then remove P-Board (MAIN_2). 2. Remove 2 screws ( ) and then slide the Side Power Unit upward.

  • Page 31: Removal Of Su-Board

    TH-103PF12U 9.15.2. Removal of V2-Board 4. Disconnect the Fan relay connectors. 5. Remove 4 screws and then remove the Fan Block (2, 3). 1. Remove 4 screw (N) and then remove the Side Power Cover. 2. Disconnect the connector (V15) and then remove V2- Board.

  • Page 32: Removal Of Sm-Board

    TH-103PF12U 10. Disconnect the connector (SU43). 4. Remove the flexible cables from the connectors (SM1, SM2, SM3, SM4, SM11, SM12). 11. Remove 5 screws ( ). 12. Remove 3 screws ( ) and then remove SU-Board. 9.17. Removal of SM-Board 5.

  • Page 33: Removal Of Sc-Board

    TH-103PF12U 1. Remove the Side Angle (R). 8. Remove the flexible cables from the connectors (SD1, (Refer to Removal of the Side Angle (R)) SD2, SD3, SD4, SD12). 2. Remove 3 screws ( ). 3. Remove 3 screws ( ) and then remove the Reinforce- ment Angle (lower_right).

  • Page 34: Removal Of Ss2-Board

    TH-103PF12U 9.20. Removal of SS2-Board 1. Remove SU-Board. (Refer to Removal of SU-Board) 2. Remove SD-Board. (Refer to Removal of SD-Board) 3. Disconnect the connectors (SM41, SM42, SM46). 4. Remove 6 screws ( ). 5. Remove 4 screws ( ) and then turn over SM-Board to the left.

  • Page 35: Removal Of Ss3-Board

    TH-103PF12U 6. Disconnect the connectors (SS34, SS35). 4. Disconnect the connectors (SS32, SS33). 7. Remove the flexible cables from the connectors (SS51, 5. Remove the flexible cables from the connectors (SS59, SS52, SS53, SS54). SS60, SS61, SS62). 8. Remove 6 screws and then remove SS2-Board.

  • Page 36: Removal Of Fan

    TH-103PF12U 5. Disconnect the connectors (SS11, SS21, SS32, SS33, SS34, SS35). 6. Remove the flexible cables from the connectors (SS55, SS56, SS57, SS58). 7. Remove 13 screws and then remove SS-Board. 9.23. Removal of Fan 3. Remove each 4 screws and then remove the Fan (A, B, C, D, E, F, G, H, J).

  • Page 37: Removal Of C1-Board (Upper)

    TH-103PF12U 1. Remove the Reinforcement Angle (upper_right). (Refer to Removal of SU-Board) 2. Remove the flexible cable from the connector (C11). 3. Remove 4 screws ( ) and then remove the flexible cables from the connectors (CA1, CA2). 4. Remove 4 screws ( ) and then remove C1-Board (upper).

  • Page 38: Removal Of C3-Board (Upper)

    TH-103PF12U 9.26. Removal of C3-Board (upper) 7. Remove the flexible cables from the connectors (C30, C31, C32). 8. Remove 6 screws ( ) and then remove the flexible cables from the connectors (CA6, CA7, CA8). 9. Remove 6 screws ( ) and then remove C3-Board (upper).

  • Page 39: Removal Of C5-Board (Upper)

    TH-103PF12U 9.28. Removal of C5-Board (upper) 1. Remove the Reinforcement Angle (upper_left). (Refer to Removal of SS2-Board) 2. Remove the flexible cable from the connector (C61). 3. Remove 4 screws ( ) and then remove the flexible cables from the connectors (CA15, CA16).

  • Page 40: Removal Of C2-Board (Lower)

    TH-103PF12U 9.31. Removal of C2-Board (lower) 2. Remove 3 screws ( ). 3. Remove 2 screws ( ) and then remove the Rear Cover Angle (lower_center). 1. Remove the Reinforcement Angle (lower_left). (Refer to Removal of SS3-Board) 2. Remove the flexible cables from the connectors (C20, 4.

  • Page 41: Removal Of C5-Board (Lower)

    TH-103PF12U 9.35. Removal of C6-Board (lower) 1. Remove the Reinforcement Angle (lower_center). (Refer to Removal of C3-Board (lower)) 2. Remove the flexible cables from the connectors (C40, C41, C42). 3. Remove 6 screws ( ) and then remove the flexible cables from the connectors (CA9, CA10, CA11).

  • Page 42: Removal Of Front Glass, V1, V3-Board And Cabinet Assy

    TH-103PF12U 1. Remove 2 screws and then remove AC Inlet Cover. 2. Remove 2 screws ( ). 3. Remove 2 screws ( ) and then slide the Side Power Unit upward. 4. Remove the Side Power Unit. 5. Remove 24 screws and then remove Cabinet Block.
  • Page 43 TH-103PF12U 9.37.1. Removal of Front Glass Note: when Cabinet or Front Glass is exchanged • You need new Aluminum Tape kit when you exchange 1. Remove 44 screws and then remove the Fixed Angles the Cabinet or Front Glass. (left, right, upper, lower).
  • Page 44 TH-103PF12U 9.37.2. Removal of V1-Board and V3-Board 4. Remove 20 screws and then remove the Cabinet Joint Metals (B, BS). 1. Remove 1 screw (P). 2. Disconnect the connector (V1) and then remove V1- Board. 3. Remove 1 screw (Q).

  • Page 45: Removal Of Plasma Display Panel

    TH-103PF12U Note: when Cabinet or Front Glass is exchanged • You need new AL Tape kit when you exchange the Cab- inet or Front Glass. Note • The felts are parts which cannot be recycled. Please use the new article when you exchange the Cabinet.
  • Page 46 TH-103PF12U 9. Remove each 4 screws (R) of the Plates. 3. Remove 2 screws ( ). 4. Remove 2 screws ( ) and then slide the Side Power Unit upward. 5. Remove the Side Power Unit. 6. Remove 24 screws and then remove Cabinet Block.
  • Page 47 TH-103PF12U 13. Remove 6 screws ( ). 14. Remove 4 screws ( ) and then remove the Rear Cover Angles (upper_center, lower_center). 17. Disconnect the connectors (DN3, DN5, DN9). 18. Remove the flexible cables from the connectors (DN1, DN2). 19. Remove 5 screws and then remove the DN-Board and 15.
  • Page 48 TH-103PF12U 22. Disconnect the connectors (DS4, DS6). 28. Disconnect the connectors of P-Board (Main_2) (CM1, 23. Remove 3 screws and then remove the Slot Block. CM2, CM3, CM4, P6, P11). 29. Remove 10 screws and then remove P-Board (MAIN_2). 30. Disconnect the connectors (P9, P25).
  • Page 49 TH-103PF12U 36. Remove 4 screws and then remove PB-Board. 40. Remove the Duct Barrier E, Duct Barriers F, Duct Barrier G, Duct Barrier H, Duct Barrier L, Duct Barrier N and Duct Barrier O. 41. Exchange the Plasma Display Panel.

  • Page 50: Measurements And Adjustments

    TH-103PF12U 10 Measurements and Adjustments 10.1. Adjustment Procedure 10.1.1. Driver Set-up 10.1.1.1. Item / Preparation 10.1.1.2. Adjustments 1. Set Aging pattern (white pattern signal) by IIC mode. 2. Set the picture controls as follows. Adjust driver section voltages. (Refer to the panel data on the Picture menu: Standard Panel Label).

  • Page 51: Initialization Pulse Adjust

    TH-103PF12U 10.1.2. Initialization Pulse Adjust 1. Set Aging pattern (white pattern signal) by IIC mode. 2. Set the picture controls as follows. Picture menu: Standard Picture: +25 Aspect: Full 3. Connect Oscilloscope to TPSC1 and adjust VR16601 for 125V ± 5V.
  • Page 52 TH-103PF12U 10.1.3. P.C.B. (Print Circuit Board) and Plasma Display Panel exchange 10.1.3.1. Quick adjustment after P.C.B. and Panel exchange 1. To remove P.C.B., wait 10 minute after power was off for discharge from electrolysis capacitors. 10.1.3.2. Quick adjustment after P.C.B. exchange Adjust the following voltages with the multimeter.
  • Page 53 TH-103PF12U 3. Check that the Ve Mode is set to 3. 4. Pless R button and then select and display Ve Init. 5. Check TPVE and adjust the volume. 6. Exit the IIC mode. 10.1.7. Ve Life adjustment 10.1.7.1. After exchange both D board and DN board 1.
  • Page 54 TH-103PF12U 10.1.9. Adjustment Volume Location 10.1.10. Test Point Location...

  • Page 55: Adjustment

    TH-103PF12U 10.2. Adjustment 10.2.1. RGB white balance adjustment Instrument Name Connect to Setting • RGB VGA60 W / B pattern PC input User setting: Normal • Color analyzer Panel surface (Picture menu: STANDARD) (Minolta CA-100 or equivalent) Steps Remarks [Condition] Picture Menu: Standard •...
  • Page 56 TH-103PF12U...
  • Page 57 TH-103PF12U 10.2.2. YUV white balance adjustment Instrument Name Connect to Setting • HD(1125/60i) W / B pattern (COMPONENT Output) PC input User setting: Normal • Color analyzer Panel surface (Picture menu: STANDARD) (Minolta CA-100 or equivalent) Steps Remarks [condition] Picture Menu: STANDARD •...
  • Page 58 TH-103PF12U...

  • Page 59: Block Diagram

    TH-103PF12U 11 Block Diagram 11.1. Diagram Notes...

  • Page 60: Main Block (1 Of 2) Diagram

    TH-103PF12U 11.2. Main Block (1 of 2) Diagram SLOT INTERFACE/SYNC PROCESSOR/SOUND PROCESSOR AUDIO OUT AUDIO TERMINALS SELECT L/R_1 L/R_2 R LINE OUT AUDIO OUT SOUND MUTE L/R_3 L LINE OUT CONTROL TERMINAL L/R_4 EQUALIZER DIGITAL SIGNAL PROCESSOR SLOT1 +3.3V(P) +5V(P)

  • Page 61: Main Block (2 Of 2) Diagram

    TH-103PF12U 11.3. Main Block (2 of 2) Diagram DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER DRIVER...

  • Page 62: Block (1 Of 8) Diagram

    TH-103PF12U 11.4. Block (1 of 8) Diagram HDMI INTERFACE HDMI IN A HDMI IN B IC3339 +3.3VREG IC3324 +3.3V EEPROM IC3338 DS12 IC3319 EDID A For HD CONFIG SLOT15V +5VSTB SLOT15V IC3325 IC3328 IC3335 STB5V EEPROM EDID A BUFFER SLOT_IIC2...

  • Page 63: Block (2 Of 8) Diagram

    TH-103PF12U 11.5. Block (2 of 8) Diagram SLOT INTERFACE/SYNC PROCESSOR/SOUND PROCESSOR DS11 +3.3V(P) SLOT3.3V +5V(P) SLOT5V +9V(P) SLOT9V +15V(P) SLOT15V +14V(LAN) LAN14V +5V(STB) STB5V AUDIO IN L AUDIO IN R VD_1 HD_1 PR_1 PR/R PB_1 PB/B SLOT1 S2_1 Q8021-23 RXD_S1...

  • Page 64: Block (3 Of 8) Diagram

    TH-103PF12U 11.6. Block (3 of 8) Diagram SLOT INTERFACE/SYNC PROCESSOR/SOUND PROCESSOR +9V(P) +3.3V(P) AUDIO OUT +3.3V(P) +5V(P) AUDIO OUT TERMINALS +5V(P) TERMINAL +9V(P) L LINE OUT JK8501 +15V(P) LAN+14V R LINE OUT +14V(LAN) +5V(STB) IC804 +1.8V(P) +1.8V A_OA+- - OE+-...

  • Page 65: Block (4 Of 8) Diagram

    TH-103PF12U 11.7. Block (4 of 8) Diagram +2.5V DIGITAL SIGNAL PROCESSOR FACTORY LVDS RECEIVER & TTL PARALLEL +2.5V R/G/B 30bit ASIC OUT A SCW IN A IC4513 A_OA+- - OE+- LVDS PARALLEL A_EA+- - EE+- RECEIVER PI1R0-R9 PI1D(0)-(29) 30bit PI1D(0)-(9)

  • Page 66: Block (5 Of 8) Diagram

    TH-103PF12U 11.8. Block (5 of 8) Diagram Q601,Q602 COLD COLD P(SUB) POWER SUPPLY(SUB) Q610,Q611 Q201,Q202 L604,L605 F201 T201 Vsus RESONANCE Vsus 5A 250V IC202 D254-D257 IC601 COMPARATOR IC201 IC251 Q605-Q608 PC201 D206 Vsus D653,654 PFC CONTROL Vsus POWER Vsus PHOTO COUPLER...

  • Page 67: Block (6 Of 8) Diagram

    TH-103PF12U 11.9. Block (6 of 8) Diagram FORMAT CONVERTER, PLASMA AI PROCESSOR FACTORY IC9500 DISCHARGE CONTROL IC9503 FACTORY FLASH DISCHARGE CONTROL DATA DRIVER CONTROL DATA SCAN CONTROL +2.5V IC9002 IIC3 C31(UPPER) SUSTAIN CONTROL TENP SENSOR +3.3V +3.3V(P) VIDEO DATA +1.2V +3.3V(P)

  • Page 68: Block (7 Of 8) Diagram

    TH-103PF12U 11.10. Block (7 of 8) Diagram SUSTAIN CONNECTOR (UPPER) SCAN DRIVE SC50 FACTORY P(MAIN_1) TPVSUS Vsus TPVSET IC16791 VSET GEN. 16V-F SHUNT REG SUSTAIN DRIVE DC/DC CONVERTER IC16788,89 Q16604 PC16601 P(MAIN_2)P11 TPVSUS CPH2 VF_GND PHOTO COUPLER Vsus SCAN OUT (UPPER)

  • Page 69: Block (8 Of 8) Diagram

    TH-103PF12U 11.11. Block (8 of 8) Diagram PANEL DRIVER PANEL DRIVER PLASMA PANEL PANEL DRIVER PANEL DRIVER PLASMA PANEL PANEL DRIVER PANEL DRIVER IC17201 IC17301 IC17401 IC17501 CONTROL CONTROL DATA DATA BUFFER BUFFER BUFFER BUFFER VIDEO VIDEO DATA DATA VIDEO...
  • Page 70 TH-103PF12U...

  • Page 71: Wiring Connection Diagram

    TH-103PF12U 12 Wiring Connection Diagram 12.1. Wiring (1)

  • Page 72: Wiring (2)

    TH-103PF12U 12.2. Wiring (2)

  • Page 73: Wiring (3)

    TH-103PF12U 12.3. Wiring (3)

  • Page 74: Exploded View And Replacement Parts List

    Model No. : TH-103PF12U Exploded View...
  • Page 75 Model No. : TH-103PF12U Side Power part location...
  • Page 76 Model No. : TH-103PF12U Cabinet part location...
  • Page 77 Model No. : TH-103PF12U Fan part location...
  • Page 78 Model No. : TH-103PF12U Rear cover location...
  • Page 79 Model No. : TH-103PF12U Duct Barriers...
  • Page 80 Model No. : TH-103PF12U Printed Circuit Board...
  • Page 81 Model No. : TH-103PF12U Cable relation...
  • Page 82 Model No. : TH-103PF12U Packing summary (1)
  • Page 83 Model No. : TH-103PF12U Packing summary (2)
  • Page 84 Model No. : TH-103PF12U Packing summary (3)
  • Page 85 Model No. : TH-103PF12U Packing summary (4)
  • Page 86 Model No. : TH-103PF12U Packing summary (5)
  • Page 87 Model No. : TH-103PF12U Packing summary (6)
  • Page 88 Model No. : TH-103PF12U Packing summary (7)
  • Page 89 Model No. : TH-103PF12U Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks EUR7636070R REMOTE CONTROLER K1LA23BA0003 BRIDGE CONNECTOR (SU-SM/SM-SD) K2CG3YY00011 AC CORD L6FAYYYH0030 FAN UNIT (80) L6FAYYYH0031 FAN UNIT (120) MD103F12S1J PLASMA DISPLAY PANEL TBMA209T PANASONIC BADGE...
  • Page 90 Model No. : TH-103PF12U Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TMKY915 DUCT BARRIER K TMKY916 DUCT BARRIER L TMKY918 DUCT BARRIER N TMKY919 DUCT BARRIER O TMKY893 BLIND SHEET TMM14490 CLAMPER TMM15414-2 CLAMPER TMM16473-1...
  • Page 91 Model No. : TH-103PF12U Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TPDX0041 BAND TPEH323 PROTECTION BAG TPEH324 FRONT PROTECTION COVER TQBC2518 INSTRUCTION BOOK (ENGLISH) TQBC2519 INSTRUCTION BOOK (FRENCH) TQBC2520 INSTRUCTION BOOK (SPANISH) TQEF035 POLY BAG(EYE BOLT COVER ASSY)
  • Page 92 Model No. : TH-103PF12U Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks XTV3+10JFJ SCREW XTV3+8JFJ SCREW XYN3+F10FJ SCREW XYN3+F8FJ SCREW XYN3+F8FJ SCREW XYN3+J10FJ SCREW XYN4+E8FJ SCREW XYN4+F10FJ SCREW XYN4+F10FJK SCREW XYN4+F32FJ SCREW XYN4+F8FJ SCREW XYN4+J10FJ SCREW...
  • Page 93 Model No. : TH-103PF12U Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP0201NB CIRCUIT BOARD DN TZTNP0301MB CIRCUIT BOARD DS TZTNP0401KB CIRCUIT BOARD HX...

Table of Contents