Direct Access Tuning; Station Preset Memory; Auto Memory Entry; Preset Tuning - Kenwood KDC-MP528 Instruction Manual
Cd-receiver
Hide thumbs
Also See for KDC-MP528:
- Instruction manual (58 pages) ,
- Service manual (40 pages) ,
- Instruction manual (43 pages)
Table of Contents
Advertisement
Tuner features
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Station Preset Memory
Putting the station in the memory.
1
Select the band
Push the Control knob to [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob to [4] or [¢].
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
16
|
English
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Push the Control knob to [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
Preset Tuning
Calling up the stations in the memory.
1
Select the band
Push the Control knob to [FM] or [AM].
2
Call up the station
Press the desired [1] — [6] button.
Hide quick links:
Advertisement
Table of Contents
