Kenwood KVT-627DVD Instruction Manual
Monitor with dvd receiver
Hide thumbs
Also See for KVT-627DVD:
- Installation manual (72 pages) ,
- Installation manual (11 pages) ,
- Service manual (102 pages)
Related Manuals for Kenwood KVT-627DVD
Summary of Contents for Kenwood KVT-627DVD
- Page 1 MONITOR WITH DVD RECEIVER KVT-727DVD KVT-627DVD INSTRUCTION MANUAL © B64-3103-00/00 (EV/E2V) KVT-727DVD KVT-627DVD...
-
Page 2: Table Of Contents
Contents Before Use ... 4 Notes on playing MP3/WMA/JPEG/MPEG .. 6 Opening/Closing the Monitor and Power Switch ... 8 Removing/Attaching the Protection Panel .. 9 KVT-727DVD/627DVD Basic operation ... 10 Basic Operations of Remote Controller ... 12 About discs ... 15 Switching Screen Mode ... - Page 3 Position ...86 Displaying the Position screen Position Adjust Stores the Preset adjustment setup Calls the Preset adjustment setup Sound Effects Menu (KVT-627DVD) ... 88 Sound Effects Menu ...88 Displaying the Control screen Displaying the Sound Effects Menu screen Audio Control ...89...
-
Page 4: Before Use
Called lens fogging, discs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. - Page 5 Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function.
-
Page 6: Notes On Playing Mp3/Wma/Jpeg/Mpeg
Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, that the MP3/WMA/JPEG/MPEG recording media and formats acceptable are limited. When writing MP3/WMA/JPEG/MPEG, pay attention to the following restrictions. Acceptable media The MP3/WMA/JPEG/MPEG recording media acceptable to this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/ When using CD-RW, do full format not quick format to prevent... - Page 7 MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
-
Page 8: Opening/Closing The Monitor And Power Switch
Opening/Closing the Monitor and Power Switch Open the monitor Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, •... -
Page 9: Removing/Attaching The Protection Panel
Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Close the monitor first, then remove or attach the protection panel. -
Page 10: Kvt-727Dvd/627Dvd Basic Operation
KVT-727DVD/627DVD Basic operations ■ When the monitor is open OPEN/CLOSE ■ When the monitor is closed OPEN/CLOSE 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 2 Stop to Play [7] key Stops to play. 3 Play/Pause [38] key Pauses and replays a disc. -
Page 11: Seek Mode
DVD/VCD TV */ Video R-CAM * Navigation * * Optional accessory You can also turn off the video display by pressing the key longer than 1 second. When you press the key again, the previous video display comes back on. 7 Audio Source Selection/Power Supply [SRC] key Audio source selection changes in the following order... -
Page 12: Basic Operations Of Remote Controller
Basic Operations of Remote Controller ENTER MENU RETURN – BAND ZOOM ZOOM POSITION MODE ROUTEM VIEW MENU TOP MENU VOICE MAPDIR 2-ZONE AV OUT REAR 1 Remote Control Mode selector switch Selects one of the following remote control modes when switched to AV control mode with [NAV] switch. TV source DVD: Built-in DVD/VCD/CD/MP3/WMA/JPEG/MPEG player source... - Page 13 6 [BAND] key (When 1 is set to "DVD" or "AUD") DISC Select a disc and a folder. (When 1 is set to "TV" or "AUD") BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2. (When 1 is set to "AUD") TUNER +: Switches to the FM1, FM2, or FM3 band.
- Page 14 o [0] – [9] key (When 1 is set to "TV" or "AUD") (When 1 is set to "TV") (When 1 is set to "AUD") TUNER — : Recall the stations on memory. 1 . ? & 6 MNO You can enter a character/number. [SUBTITLE] key (When 1 is set to "DVD") : Switches a subtitle language.
-
Page 15: About Discs
About discs Handling discs • Do not touch the recording surface of the disc. • CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVD-R/RW, or DVD+R/RW after reading the caution items on the package etc. -
Page 16: Switching Screen Mode
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. OPEN/CLOSE DISP [MODE] key Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) •... - Page 17 English...
-
Page 18: Controlling During Dvd Video, Video Cd Or Dvd Media Playback
Controlling during DVD Video, Video CD , JPEG or MPEG Playback Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc, a JPEG or a MPEG files. Displaying the DVD/VCD/JPEG/MPEG Playback screen You can use the following operations when displaying DVD/VCD/JPEG/MPEG images. -
Page 19: Displaying The Easy Control Panel
JPEG/MPEG playback screen DVD MEDIA MODE: F U L L AV-OUT: Displaying the Easy Control Panel The Control Panel is displayed in a floating position of the DVD/VCD screen. Displaying the Easy Control Panel T i t l e 1 C h a p 3 DVD VIDEO MODE: F U L L... -
Page 20: Displaying The Dvd/Vcd Control Screen
Displaying the DVD/VCD Control screen Plays a DVD/VCD using various functions. DVD/VCD Control screen DV D V I D E O N e x t N e x t 39 40 T i t l e 1 C h a p T 0 : 0 5 : 2 0 K E N W O O D T-REP... - Page 21 Controlling during DVD Video, Video CD, JPEG or MPEG Playback English...
-
Page 22: Dvd Disc Menu
You can select a chapter and title for the DVD Menu screen. When you touch a chapter and title, it is played back. Highlight Off : MODE Key DVD Menu DVD Menu 1. KENWOOD 1. KENWOOD 2. KENWOOD 2. KENWOOD 3. KENWOOD 3. KENWOOD 4. KENWOOD 4. -
Page 23: Vcd Zoom Control
Controlling during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Displays an enlarged VCD screen. Display the Zoom Control screen Zoom Control Button Area (page 18) ZoomCtrl Zoom 1 Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. -
Page 24: Cd/Mp3/Wma/Jpeg/Mpeg/Disc Changer Play Control
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback. Displaying the Easy Control Panel The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel During CD playback DVD CD MODE: F U L L... -
Page 25: Changer Control Screen
Displaying the CD/MP3/WMA/ JPEG/ MPEG/Disc Changer Control screen You can play the CD/MP3/WMA/disc changer using various functions. CD Control screen DV D C D M e n u DISP T r a c k 4 P 2 : 0 9 K E N W O O D During CD playback 9 Adjusts the volume. - Page 26 MP3/WMA/JPEG/MPEG Control screen DV D M E D I A M e n u DISP N e x t N e x t K E N W O O D FREP English During MP3/WMA/JPEG/MPEG play 13:50 l Calls the MP3/WMA/JPEG/MPEG Menu. / Ejects a disc.
- Page 27 Disc changer/CD player Control screen C D C H M e n u D i s c D i s c DISP SCRL N e x t N e x t DREP MRDM CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control During play by the disc changer/CD player 13:50 U Calls the Disc Changer/ CD player Menu.
-
Page 28: Changer Menu Screen
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Menu screen You can select menu options using various functions. Me n u CD Menu screen D V D C D Name Set English Selects options from various function menus. Returns to the CD/MP3/WMA/JPEG/MPEG/Disc Changer Control screen. •... -
Page 29: Set Disc Name
Set Disc Name Names a CD. Play a CD you wish to name Call the CD/Disc Changer Menu Me n u Select the Set Name mode Name Set • The Name Set depending on the disc you are playing. Enter a name For character entry details, see <Character Entry>... -
Page 30: Id3/Wma Tag Display (During Mp3/Wma Play)
ID3/WMA TAG Display (during MP3/ WMA play) The ID3/WMA TAG information of MP3/WMA file is listed. Call the MP3/WMA/JPEG/MPEG Menu Me n u Display the ID3/WMA TAG I n fo r m a t i o n DVD MEDIA A L B U M : T i t l e : A r t i s t : A l bu m :... -
Page 31: Direct Search
Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed. CD: Track number, Total play time MP3/WMA/JPEG/MPEG: Folder, File Enter a track number... -
Page 32: Tuner Control
Tuner Control Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel The Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel MODE:FULL AV-OUT:DVD TUNER F M 1 P r e s e t 1 Displaying the Tuner Control screen You can tune in a station using various functions. -
Page 33: Displaying The Tuner Menu Screen
Displaying the Tuner Menu screen You can select menu options using various functions. Me n u Tuner Menu screen T U N E R Preset Select PTY Search Radio Text a When the stations on memory. For memory of broadcasting stations, see <Auto Memory>... -
Page 34: Seek Mode
Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically. -
Page 35: Preset Select
Preset Select Lists and tunes in stations in memory one after the other. Call the Tuner Menu Me n u Call the Preset Select Menu Preset Select T U N E R FM1 1) 87.5 MHz FM1 2) 90.1 MHz FM1 3) 98.1 MHz FM1 4) 106.1 MHz FM1 5) 108.0 MHz... -
Page 36: Direct Search
Direct Search Tunes in a station when its frequency is entered. Select a band – BAND Selects the Direct Search mode # BS DIRECT Enter a frequency — 9 WXYZ When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz 9 WXYZ 2 ABC 1 . -
Page 37: Search For Program Type
Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast.) Call the Tuner Menu Me n u Call the PTY Search Menu PTY Search T U N E R All Speech All Music News Current Affairs... -
Page 38: Tv/ Video Control
TV/ VIDEO Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Displaying the TV Picture screen Various control screens appear in the TV Source mode. Select the TV Pictures. -
Page 39: Displaying The Tv Control Screen
Displaying the TV Control screen You can tune in a TV station using various functions. TV Control screen VIDEO – – SEEK N e x t N e x t T V 1 G r o u p 1 P r e s e t 1 AUTO1 Displaying the TV Menu screen You can select menu options using various... -
Page 40: Seek Mode
Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically. -
Page 41: Set Station Name
Set Station Name Names a station. Select a station you wish to name Call the TV Menu (Page 39 y) Me n u Select the Set Name mode Name Set Enter a name For character entry details, see <Character Entry> (see page 48). -
Page 42: Dab Tuner Control
DAB Tuner control Various control screens appear in the DAB Tuner source mode. (with the optional accessory DAB tuner connected only) Displaying the Easy Control Panel The DAB Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel MODE:FULL AV-OUT:DVD Band... -
Page 43: Displaying The Dab Tuner Menu Screen
Displaying the DAB Tuner Menu screen You can select menu options using various functions. Me n u DAB Tuner Menu screen D A B Ser vice Select Languag e Filter PTY Search DAB Information s Selects option from various function menus. d Returns to the DAB Tuner Control screen. -
Page 44: Seek Mode
Seek Mode Sets a station selection. SEEK is not shown, touch SEEK N e x t N e x t The mode is switched in following order each time you touch the button. Tunes in a ensemble with good AUTO1 reception automatically. -
Page 45: Service Select
Service Select The service list of the currently receiving ensemble is displayed for your selection. Call the DAB Tuner Menu Me n u Call the Service Select Menu Ser vice Select D A B Ser vice Name Ser vice Name Ser vice Name Ser vice Name Ser vice Name... -
Page 46: Search For Program Type
Search for Program Type The services are received when you set its program type. Call the DAB Tuner Menu Me n u Call the PTY Search Menu PTY Search D A B N e w s SRCH LANG 2 2 0 . 0 9 4 M H z 1 Selects a program type. -
Page 47: Dab Information
DAB Information The DAB information is displayed. Call the DAB Tuner Menu Me n u Display the DAB Information screen DAB Information T U N E R Service Label: Ensemble Label: Component Lable: 2 2 0 . 0 9 4 M H z 1 Displays the DAB information (such as Service label, Ensemble label, Component label, Audio quality, Region label, and Dynamic label). -
Page 48: Character Entry
Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen K E N W O O D S p a c e English 1 Shifts the cursor. -
Page 49: Source Select
Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen Press this key several times unit the Control screen appears. Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p... -
Page 50: Adjusting The Monitor Display Position And Quality
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen You can adjust the picture quality using the following keys. Screen Control screen Displaying the Angle Control screen You can set the monitor position and open/close speed. -
Page 51: Setup Menu
Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen Press this key several times until the Control screen appears. Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p K E N W O O D... -
Page 52: Audio Set Up (Kvt-727Dvd)
Audio Set UP (Function of KVT-727DVD) Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. -
Page 53: Displaying The Channel Level Screen
Displaying the Channel Level screen You can set the volume at each setup position. Channel Level screen T e s t Front Left + 5 d B Channel Level r Selects a speaker to be set. (see <Channel Level>, page 55) t Sets the speaker volume. - Page 54 Speaker Set Up You can select a speaker type and its size to get the best sound effects. Select a speaker you wish to adjust (Page 52 8) Speaker Set Up screen U s e X'Over HPF X'Over LPF Front 1 0 c m Speaker 1 Center speaker...
-
Page 55: Channel Level
Channel Level You can set the volume at each setup position. Select a speaker you wish to adjust (Page 53 r) Channel Level setup screen T e s t Front Left + 5 d B Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker... -
Page 56: Dta Setup
DTA Setup Manually sets the sound output timing of each channel. Display the DTA Setup screen (Page 52 6) DTA Setup screen Front 1 0 c m 1 Selects a speaker to be adjusted. 2 Sets a delay time of the selected speaker. 3 Returns to the Car Type Set Up screen. - Page 57 Crossover Network Setup You can manually set a crossover frequency of speakers. Sets a High pass Filter friquency. (Page 52 p) X'Over HPF X ' O v e r ( H P F ) H P F F r o n t H P F R e a r FREQ FREQ...
-
Page 58: Audio Set Up (Kvt-627Dvd)
Audio Set UP (Function of KVT-627DVD) Audio Set Up You can setup a speaker network, etc. Displaying the Audio Set Up screen Speaker setup screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 59: Crossover Network Setup
Crossover Network Setup You can set a crossover frequency of speakers. X'Over setup screen X ' O v e r HPF Front FREQ 2 2 0 H z HPF Rear FREQ 1 8 0 H z LPF SUB FREQ 1 2 0 H z S U B P h a s e 1 Sets a Front High Pass Filter frequency. -
Page 60: Dvd Setup
DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen DVD SETUP 1 screen Menu LANG S u b t i t l e LANG Au d i o LANG Dynam i c R a n g e N o r m a l DVD SETUP 1 English... -
Page 61: Displaying The Dvd Setup 2 Screen
Displaying the DVD SETUP 2 screen DVD SETUP 2 screen Angle Mark S c r e e n R a t i o 1 6 : 9 Pa r e n t a l L e v e l O f f DVD SETUP 2 Displaying the DVD SETUP 3 screen DVD SETUP 3 screen... -
Page 62: Language Setup
Language Setup Selects a language you use for the speech and menus. Display the Language Setup screen See <Displaying the DVD SETUP 1 screen> (page 60) and select a language you wish to use. A u d i o LANG C l e a r C a n c e l 1 Enters a language code. -
Page 63: Parental Level Setup
Parental Level Setup Sets a parental level. Display the Parental Level code number screen (Page 61 q) S e t P a r e n t a l P a s s * * * * C l e a r C a n c e l 1 Enters a code number. -
Page 64: System Setup
System Setup You can set up the system parameters. Displaying the System Set Up 1 screen System Set Up 1 screen B e e p S c ro l l A u t o Remote Sensor System Set Up 1 English 1 Adjusts the volume. - Page 65 Displaying the System Set Up 2 screen System Set Up 2 screen CD Read Key ILLUMI G r e e n System Set Up 2 9 Sets a music CD playback. ( "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD.
-
Page 66: Av Interface
Control during DVD Video or Video CD Playback AV Interface You can set audio and visual (AV) interface parameters. <KVT-627DVD : AV INPUT1 only> Displaying the AV I/F 1 screen AV I/F 1 screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 67: Displaying The Av I/F 2 Screen
Before Use Displaying the AV I/F 2 screen AV I/F 2 screen D V D Displaying the AV I/F 3 screen AV I/F 3 screen F - L e f t p Sets a method to switch to the rear view camera video display. -
Page 68: User Interface
Before Use User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User I/F 1 screen Displaying the User I/F 2 screen User I/F 2 screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 69: Touch Panel Adjustment
Before Use Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch Touch touch to display it. Touch Adjust Me n u T o u c h 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 70: Security Code Setup
Before Use Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport"... - Page 71 Before Use If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code E n t e r Now, you can use your Receiver.
-
Page 72: Set Up Memory
Before Use Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the Set Up Memory screen Set Up Memor y Set Up Memor y... -
Page 73: Tv Setup
Before Use TV Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) Displaying the TV1 Area Set screen TV Set Up TV1 Area Set screen Me n u Au s t r i a B e l g i u m F i n l a n d G e r m a ny... -
Page 74: Rds Setup
RDS Setup The related RDS parameters can be set. Displaying the RDS Set Up 1 screen RDS Set Up RDS Set Up 1 screen Me n u News O f f R e g i o n a l Au t o T P S e e k RDS Set Up 1 Displaying the RDS Set Up 2 screen RDS Set Up 2 screen... -
Page 75: Amp Control
AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen AMP Ctrl AMP Control screen Me n u A M P 1 V O L T 1 4 . 4 V A M P C o n t r o l 1 Adjusts the volume. -
Page 76: Dab Set Up
DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen DAB Set Up DAB Set Up screen D A B P r i o r i t y Me n u D R C R e g i o n a l I N T... -
Page 77: Announcement Selection
Announcement Selection You can set various announcement reception parameters. Displays the Announcement Selection screen (Page 76 9) S e t A n n o u n c e m e n t Tr a f f i c N e w s Tr a n s p o r t N e w s Wa r n i n g N e w s... -
Page 78: Sound Effects Menu (Kvt-727Dvd)
Sound Effects Menu (Function of KVT-727DVD) Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p T 0 : 0 5 : 2 0 K E N W O O D... -
Page 79: Audio Control
Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen Displaying the Audio Control 2 screen Audio Control 2 screen Me n u BMS AMP Bass + 6 d B BMS AMP FREQ Normal... -
Page 80: Equalizer
Equalizer You can set up the equalizer. Displaying the Equalizer screen E q u a l i z e r Equalizer screen Pops Equalizer English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 51) 4 Calls the Sound Effects Menu. -
Page 81: Parametric Equalizer
Parametric Equalizer You can manually set the equalizer curve by adjusting the center frequency, gain and Q value. Display the Parametric Equalizer screen P-EQ Parametric Equalizer Band1 Band2 Band3 Band4 1.60 16.00 1.00 0.25 0.50 1 Adjusts the volume. 2345 Select a band to be adjusted. 6 Sets a frequency. -
Page 82: Surround Control
Surround Control You can set up the sound field. Displaying the Surround Control screen S u r ro u n d C o n t ro l Surround Control screen Surround Stream infomation Dolby Digital 48kHz 2/0 Sorround Control English 1 Adjusts the volume. -
Page 83: Surround Control Adjustment
Surround Control Adjustment You can adjust the sound field. Display the Surround Control screen Adjust Surround Control Adjust screen If the sound field of "Dolby PLII Music" has been set: Dimention Control N e u t r a l Center Width Control Panorama Mode 1 Adjusts the volume. -
Page 84: Srs Wow Control
SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen S R S WOW SRS WOW Control screen SRS WOW Middle SRS WOW Table of Sound Effect Menu You can set to sound effect menu to mark " Input Surround Front... -
Page 85: Srs Wow Uesr Setup
SRS WOW User Setup Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust TurBass Front FOUCS Rear SRS 3D Center 1 Adjusts the volume. 2 Selects a speaker to be set (Front or Rear or Center speaker). -
Page 86: Position
Position You can adjust the sound effects according to your listening position. Displaying the Position screen Po s i t i o n Position screen Position English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. -
Page 87: Position Adjust
Position Adjust You can fine-adjust your listening position. Display the Position Adjust screen Adjust Position Fine Control screen Position Adjust Total Front Left 1 0 0 c m Front Left 1 0 0 c m 1 Adjusts the volume. 2 Selects a speaker to be adjusted. 3 Indicates setup distance. -
Page 88: Sound Effects Menu (Kvt-627Dvd)
Sound Effects Menu (Function of KVT-627DVD) Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen Control screen DV D V I D E O N e x t N e x t T i t l e 1... -
Page 89: Audio Control
Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen Displaying the Audio Control 2 screen Audio Control 2 screen Me n u BMS AMP Bass + 6 d B BMS AMP FREQ Normal... -
Page 90: Equalizer
Control during DVD Video or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen E q u a l i z e r Equalizer screen Me n u System Q N a t u r a l S y s t e m Q - E X Equalizer English... -
Page 91: Tone Curve Setup
Middle: 500, 1k, 1.5k, 2k Hz Treble: 10k, 12.5k, 15k, 17.5k Hz Set a center frequency FREQ Sound Effects Menu (Fuction of KVT-627DVD) Set a level Set a Q factor You can set it up only when Bass or Middle is adjusted. -
Page 92: Zone Control
Zone Control Zone Control You can set the front and rear audio source. Displaying the Zone Control screen Zone Control screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 51) 4 Calls the Sound Effects Menu. -
Page 93: Muting Audio Volume Upon Reception Of Phone Call
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and systemis paused. Phone Call ("CALL") screen C A L L If you want to continue to listen to the audio... -
Page 94: Glossary
Glossary DVD: Digital Versatile Disc A type of disc which contains recording of audio/ video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of mov- ing images. -
Page 95: Troubleshooting Guide
Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. • The rear speakers of DTA cannot be set. • The "Position Fine Control" of rear speakers cannot be set. •... - Page 96 Before Use What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn on. ✔...
- Page 97 Before Use The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. ✔ The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker.
- Page 98 Disc source The disc control mode cannot be selected. ✔ No wire has been connected to the disc changer input terminal on the unit. Connect the wire to the disc changer input terminal on the unit. The specified disc does not play, but another one plays instead.
- Page 99 Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down.
-
Page 100: Specifications
Specifications (KVT-727DVD) Specifications subject to change without notice. Monitor Section Picture size : 6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement... - Page 101 Video section Color system of external video input : NTSC/PAL External video input level (RCA jacks) : 1Vp-p/75Ω External audio max input level (RCA jacks) : 1V/22kΩ Analog RGB input : 0.7Vp-p/75Ω Audio section Maximum Power (Front&Rear) : 50W×4 Output power (Front&Rear) (DIN 45324, +B=14.4V) : 30W×4 Preout level (V) : 5V/10kΩ...
- Page 102 Specifications (KVT-627DVD) Specifications subject to change without notice. Monitor section Picture size : 6.95 inches wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99%...
-
Page 103: Laser Product
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.