Page 2
HANK We are grateful for your purchase of this KENWOOD product and welcome you to the Family Radio Service (FRS). FRS is a personal, short range 2-way radio band for family & friends to keep in touch without the need for a license, radio knowledge, or monthly charges.
L key Press to turn the display backlight ON. Press and hold to lock the MODE key and Power switch. UBZ-GR14 E 1-20 Power switch Press and hold for 3 seconds to switch the transceiver ON or OFF. keys...
When inserting batteries, be sure to match the battery polarities with those marked in the battery compartment. 4 Replace the battery cover, making sure the battery cover latch locks in place. UBZ-GR14 E 1-20 ATTERIES NSTALLING EMOVING THE 01.4.12, 9:35 AM...
SP jack. 3 When you remove the head-phones from the transceiver, be sure to cover the SP jack with the attached tab in order to keep dust and dirt away from the contacts. UBZ-GR14 E 1-20 TEREO EADPHONES 01.4.12, 9:35 AM...
The 3 programmable function keys on the SMC-34 cannot be used with this transceiver. To use the speaker-microphone, press the PTT switch to transmit and release it to receive. You can also adjust the volume level using the SMC-34 Volume control. UBZ-GR14 E 1-20 PTIONAL CCESSORIES 01.4.12, 9:35 AM...
• The volume level (1 ~ 8) appears for approximately 5 seconds before returning to the channel number/ station. UBZ-GR14 E 1-20 ON/ OFF OWER PERATING OLUME...
If you set the code on your selected channel to “OF” (off), you will hear calls from everyone within range who is using the same channel you have selected. UBZ-GR14 E 1-20 FRS MODE key to continuously increase or ”...
Note: If you do not release the PTT switch after you finish talking, you will not be able to receive any calls. Additionally, pressing the PTT switch for extended periods will reduce the battery power. UBZ-GR14 E 1-20 key to increase or decrease the code key to continuously increase or...
2 When a signal is found at a code setting, scan will pause at that code for 10 seconds. • To resume scanning before the 10 second timer elapses, press the 3 To end scan and return to normal operation, press the PTT switch. UBZ-GR14 E 1-20 key. key. 01.4.12, 9:35 AM...
PTT switch. • Pressing the M key after finding a station will end scan and return to the last station you were using. UBZ-GR14 E 1-20 FM MODE key to increase or decrease the FM key for 0.5 seconds.
FM station. 3 Once you have selected your desired station, press the PTT switch. • Pressing the M key after selecting a station will return to the last station you were using. UBZ-GR14 E 1-20 HANNEL TATION 01.4.12, 9:35 AM...
Note: If you do not release the PTT switch after you finish talking, you will not be able to receive any calls. Additionally, pressing the PTT switch for extended periods will reduce the battery power. UBZ-GR14 E 1-20 key for 0.5 seconds. key.
When replacing batteries, replace all batteries at the same time; do not mix old and new batteries together. Additionally, use batteries of only the same type; do not mix different types of batteries together. UBZ-GR14 E 1-20 01.4.12, 9:35 AM...
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer for technical assistance. UBZ-GR14 E 1-20 01.4.12, 9:35 AM...
Page 19
If you wear the transceiver on your body, ensure that the antenna is at least 1 inch (2.5 cm) away from your body while you are transmitting. Use only KENWOOD genuine accessories and the supplied antenna. Unauthorized antennas, modifications, or attachments may damage the transceiver and violate FCC regulations.
Whenever the product is presented for warranty service, you must supply a sales receipt or other evidence of the date of purchase. Kenwood reserves the right to repair or replace the product with a new or reconditioned product.
Page 21
If a problem develops during or after the Limited Warranty Period, or if you have any questions regarding the operation of the product, you should contact your KENWOOD Authorized Dealer or Distributer. If the problem or your question is not handled to your satisfaction, please contact our Customer Relations Department at (310) 639-5300.
Kenwood Electronics Canada Inc. (hereinafter called “KENWOOD”) gives the following written warranty to the original purchaser of each new Kenwood product distributed in Canada by KENWOOD which is purchased from a KENWOOD authorized dealer. KENWOOD warrants this product to be free of defects, attributable to faulty materials or workmanship at time of manufacture, for a period of ninety (90) days from the date of original purchase.
Page 23
The replacement unit will be warranted for the balance of the warranty period of the original unit. KENWOOD reserves the right to repair or replace the unit with a new or reconditioned product. In the event it is necessary to ship your unit to your dealer, carefully pack the unit and return it to them freight prepaid.