Advertisement
Quick Links
Download this manual
See also:
User Manual
PowerLite
Pro Cinema LS10000
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide (see the "Where to get help" section).
Choose a location
Keep the projector level and place it at a
height so its lens is even with the top or
bottom of the screen and is centered
horizontally. If this isn't possible, use the
lens shift feature or the keystone correction
button on the projector to reposition the
image (see "Adjust the image").
To view 3D images correctly, RF 3D glasses
must be worn within 32 feet (10 m) of the
projector. Use the image to determine the
viewing distance for 3D projection (the
shading represents the 3D viewing area):
See the online User's Guide for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online User's Guide.
Video device
1
Loosen the two screws at the bottom of the cable cover, then pull the
cover forward.
2
Lift the cable cover out of the grooves at the top.
3
Connect up to 4 video devices and use the Source buttons on the remote
control or the
button on the projector to switch between them.
HDMI cable
Component video cable
RCA video cable
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Press the
power button on the projector or the On button on the
remote control. The shutter opens and the power light flashes blue,
then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control.
4
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the menu
system.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Choose which source
to display
Control connected
sources with
HDMI Link
Adjust zoom, focus
and lens shift
Access projector
menus
Change the
3D format
For more information on using the remote control, see the online
User's Guide.
power button on the
Turn projector off
Turn off projector
display
Switch between
2D and 3D
Navigate projector
menus
Display test pattern
Advertisement
Related Manuals for Epson PowerLite Pro Cinema LS10000
Summary of Contents for Epson PowerLite Pro Cinema LS10000
-
Page 1: Quick Setup
PowerLite Pro Cinema LS10000 ® Quick Setup Turn on your equipment Turn on your video source. Before using the projector, make sure you read the safety instructions in the online User’s Guide (see the ”Where to get help” section). Plug in the projector. Choose a location Keep the projector level and place it at a height so its lens is even with the top or... -
Page 2: Adjust The Image
Adjust the image Viewing 3D images Press the Pattern button on the remote control to display a test pattern. To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. Turn on and begin playback on the 3D-compatible video device. -
Page 3: Where To Get Help
You can purchase additional RF 3D glasses (part number V12H548006) or other Declaration of Conformity accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals;... - Page 4 EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.