Embedded SATA RAID Controller
Installing LSI MegaSR Drivers For Windows and Linux
The required drivers for this controller are already installed and ready to use with the LSI software RAID
Note
Configuration Utility. However, if you will use this controller with Windows or Linux, you must
download and install additional drivers for those operating systems.
This section explains how to install the LSI MegaSR drivers for the following supported operating
systems:
•
•
•
For the specific supported OS versions, see the
server release.
This section contains the following topics:
•
•
•
Downloading the LSI MegaSR Drivers
The MegaSR drivers are included in the C-Series driver ISO for your server and OS. Download the
drivers from Cisco.com.
Find the drivers ISO file download for your server online and download it to a temporary location on
Step 1
your workstation:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Cisco UCS C240 M4 Server Installation and Service Guide
C-14
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Downloading the LSI MegaSR Drivers, page C-14
Microsoft Windows Driver Installation, page C-15
Linux Driver Installation, page C-17
See the following URL: http://www.cisco.com/cisco/software/navigator.html
Click Unified Computing and Servers in the middle column.
Click Cisco UCS C-Series Rack-Mount Standalone Server Software in the right-hand column.
Click your model of server in the right-hand column.
Click Unified Computing System (UCS) Drivers.
Click the release number that you are downloading.
Click Download to download the drivers' ISO file.
Verify the information on the next page, and click Proceed With Download.
Continue through the subsequent screens to accept the license agreement and then browse to a
location where you want to save the drivers' ISO file.
Appendix C
Hardware and Software Interoperability Matrix
RAID Controller Considerations
for your
OL-32474-01