Sony MEX-N4050BT Operating Instructions Manual
Bluetooth audio system
Hide thumbs
Also See for MEX-N4050BT:
- Operating instructions manual (56 pages) ,
- Operating instructions manual (56 pages)
Related Manuals for Sony MEX-N4050BT
Summary of Contents for Sony MEX-N4050BT
-
Page 1: Audio System
4-480-655-81(1) Bluetooth® Operating Instructions Audio System To switch the FM/AM tuning step, see page 6. To cancel the demonstration (DEMO) display, see page 16. MEX-N4050BT... - Page 2 Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. Laser Diode Properties Emission Duration: Continuous Laser Output: Less than 53.3 μW (This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture.) The nameplate indicating operating voltage, etc., is...
- Page 3 Caution with adequate cellular signal strength. IN NO EVENT SHALL SONY BE LIABLE FOR ANY Emergency calls may not be possible on all cellular INCIDENTAL, INDIRECT OR CONSEQUENTIAL phone networks or when certain network services DAMAGES OR OTHER DAMAGES INCLUDING, and/or phone features are in use.
-
Page 4: Table Of Contents
Additional Information Table of Contents Precautions ....... 19 Guide to Parts and Controls ....5 Maintenance . -
Page 5: Guide To Parts And Controls
Guide to Parts and Controls Main unit The number 3/ (repeat) button has a tactile dot. (browse) (page 11) -OFF Press and hold for 1 second to turn off the Enter the browse mode during playback. power. Front panel release button Press and hold for more than 2 seconds to turn ... -
Page 6: Getting Started
PAUSE PTY (program type) Getting Started Select PTY in RDS. AUX input jack Detaching the Front Panel USB port You can detach the front panel of this unit to Microphone (on inner panel) prevent theft. In order for the handsfree function to work Press and hold OFF . -
Page 7: Setting The Clock
Select [Sony Car Audio] shown in the [50K/9K], [100K/10K] or [200K/10K], then display of the BLUETOOTH device. press it. If [Sony Car Audio] does not appear, repeat from step 2. Setting the Clock Press MENU, rotate the control dial to select [GENERAL], then press it. -
Page 8: Connecting With An Iphone/Ipod
Operate the BLUETOOTH device to For details, refer to the operating instructions supplied with the smartphone. connect to this unit. lights up. Touch the N-Mark part of the unit with the N-Mark part of the smartphone. Icons in the display: Lights up when a cellular phone is connected to the unit. -
Page 9: Connecting An Ipod/Usb Device
Connecting an iPod/USB Device Listening to the Radio Turn down the volume on the unit. Listening to the Radio Connect the iPod/USB device to the unit. To connect an iPod/iPhone, use the USB Tuning step setting is required (page 6). connection cable for iPod (not supplied). -
Page 10: Using Radio Data System (Rds)
Using Radio Data System (RDS) Playback Selecting program types (PTY) Playing a Disc Use PTY to display or search for a desired program Insert the disc (label side up). type. Press PTY during FM reception. Rotate the control dial until the desired program type appears, then press it. -
Page 11: Playing A Bluetooth Device
To remove the device Searching and Playing Tracks Stop playback, then remove the device. Caution for iPhone When you connect an iPhone via USB, phone call Repeat play and shuffle play volume is controlled by the iPhone, not the unit. Do not inadvertently increase the volume on the unit During playback, press (repeat) for... -
Page 12: Listening To Pandora
Rotate the control dial to select the desired item, then press it. Listening to Pandora® Playback starts. Pandora® is available to stream music through your iPhone, Android™ and BlackBerry® phones. You can control Pandora® on a USB-connected iPhone or BLUETOOTH connected Android/BlackBerry phone from this unit. -
Page 13: Available Operations In The Pandora
Available Operations in the Handsfree Calling Pandora® To use a cellular phone, connect it with this unit. For details, see “Preparing a BLUETOOTH Device” “Thumbs” feedback (page 7). “Thumbs Up” or “Thumbs Down” feedback allows you to personalize stations. Thumbs Up During playback, press . -
Page 14: Available Operations During Call
Rotate the control dial to select a name Calling by voice tags or phone number from the call history, then press it. You can make a call by saying the voice tag stored The phone call starts. in a connected cellular phone that has a voice dialing function. -
Page 15: Useful Functions
SMS/E-mail/Notification reading is available for notifications, etc., are received, they are Android devices with TTS engine installed. The “Smart Connect” application, provided by Sony automatically announced through the car speakers. Mobile Communications, is necessary for Twitter/ Facebook/Calendar, etc., notification read out. -
Page 16: Settings
Activating voice recognition (Android phone only) Settings By registering applications, you can control an application by voice command. For details, refer to Canceling the DEMO Mode the help of the application. You can cancel the demonstration display which To activate voice recognition appears while this unit is turned off. -
Page 17: Sound Setup
C.AUDIO+ (clear audio+) NORMAL (): Normal Reproduces sound by optimizing the digital FAR (): Far signal with the Sony recommended sound settings: [ON], [OFF]. (Automatically sets to [OFF] BALANCE when [EQ10 PRESET] is changed). Adjusts the sound balance: [RIGHT-15] –... -
Page 18: Sw Direc (Subwoofer Direct Connection)
LPF FREQ (low pass filter frequency) BTA VOL (BLUETOOTH audio volume level) Selects the subwoofer cut-off frequency: [50Hz], Adjusts the volume level for each connected [60Hz], [80Hz], [100Hz], [120Hz]. BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB]. LPF SLOP (low pass filter slope) This setting negates the need to adjust the Selects the LPF slope: [1], [2], [3]. -
Page 19: Bt Init (Bluetooth Initialize)
BT SIGNL (BLUETOOTH signal) (page 7) Activates the BLUETOOTH function: [ON], [OFF]. Additional Information BT INIT (BLUETOOTH initialize) Initializes all the BLUETOOTH related settings Precautions (pairing information, preset number, device information, etc.). Cool off the unit beforehand if your car has been When disposing the unit, initialize all the parked in direct sunlight. -
Page 20: About Bluetooth Function
If the multi-session disc begins with a CD-DA “Made for iPod” and “Made for iPhone” mean that session, it is recognized as a CD-DA disc, and an electronic accessory has been designed to other sessions are not played back. connect specifically to iPod or iPhone, ... -
Page 21: Maintenance
BLUETOOTH device, stop using the BLUETOOTH Otherwise, the connectors may be damaged. device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. -
Page 22: Specifications
Compatible BLUETOOTH Profiles* Specifications A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio Video Remote Control Profile) 1.5 HFP (Handsfree Profile) 1.6 Tuner section PBAP (Phone Book Access Profile) SPP (Serial Port Profile) MAP (Message Access Profile) Tuning range: HID (Human Interface Device Profile) 87.5 –... -
Page 23: Troubleshooting
The following checklist will help you remedy trademarks owned by Bluetooth SIG, Inc. and any problems you may encounter with your unit. use of such marks by Sony Corporation is under Before going through the checklist below, check license. Other trademarks and trade names are the connection and operating procedures. -
Page 24: Radio Reception
USB playback The operation buttons do not function. The disc will not eject. You cannot play back items via a USB hub. Press PTY and (back)/MODE for more than 2 This unit cannot recognize USB devices via a USB seconds to reset the unit. - Page 25 The playback sound stops momentarily when the No ringtone. connection between this unit and the cellular Adjust the volume by rotating the control dial phone is being made. This is not a malfunction. while receiving a call. Depending on the connecting device, the The connected BLUETOOTH audio device cannot ringtone may not be sent properly.
- Page 26 For BLUETOOTH function: IPD STOP (iPod stop) When repeat play is not set, playback of the last BT BUSY (BLUETOOTH busy) track in album finished. The phonebook and the call history of the cellular The music application in the iPod/iPhone is phone are not accessible from this unit.
- Page 27 Pandora® limits the number of skips allowed on If these solutions do not help improve the situation, consult your nearest Sony dealer. their service. Wait until the next track begins, or If you take the unit to be repaired because of CD select another station on the list.
- Page 28 ©2014 Sony Corporation Printed in Thailand...