Pto Brake Adjustment - Toro Groundsmaster 300 Series Service Manual

Hide thumbs Also See for Groundsmaster 300 Series:

Table of Contents

PTO Brake Adjustment (Fig. 8)

1 . Lower the implement to the shop floor, turn the engine

off, remove the key from the ignition switch, and engage

the parking brake.

2. Move the P.T.O. lever to the ENGAGE position.

Loosen the adjusting locknut so that the brake is free to

move. Then move the P.T.O. lever to OFF and position

the brake in the grooves of the pulley.

3. Tighten the locknut until the spacer contacts the side

of the brake bracket.

Groundsmaster

Show Quick Links

Chapters

Table of Contents