Thumbnail Search
Searching Using Thumbnails
To display the thumbnail images of all clips on the disc,
and cue up a desired clip, proceed as follows.
1
THUMBNAIL
indicator
MONITOR
CH-1
CH-3
CH-1/2
MIX
MIX
CH-3/4
CH-2
CH-4
SHIFT
SHIFT
button
PRESET
REGEN
CLOCK
LITHIUM BATT
ON
OFF
3
2
1
With the SUB CLIP indicator off, press the
THUMBNAIL button to turn the THUMBNAIL
indicator on.
If the SUB CLIP indicator is lit, you can turn it off by
pressing the SEL/SET button to the upper side (the
SUB CLIP side) with the SHIFT button held down.
If the menu screen is displayed, move the MENU
switch to the OFF position and press the
THUMBNAIL button.
If you set the MENU switch to ON while thumbnails
are displayed, thumbnail display is replaced with
menu display.
The thumbnails of all clips on the disc appear.
(In the following descriptions, this is referred to as the
"thumbnail screen".)
78
Thumbnail Search
SUB CLIP indicator
2,3
THUMBNAIL
SUB CLIP
AUDIO LEVEL
ESSENCE
CLIP MENU
MARK
SEL/SET
0
10
0
10
CH-3
F-RUN
F
AUTO
SET
W
R-RUN
MANUAL
R
AUDIO SELECT
CH-1
CH-2
CH-4
FRONT MIC
VIDEO OUT
AUDIO IN
LOW CUT
CHARACTER
FRONT
F
ON
WIRELESS
W
OFF
REAR
R
Name of currently
a)
selected clip
Thumbnail of currently
selected clip (first frame
or specified
Recording date and time
of selected clip
c)
Clip information
a) When a title has been assigned to a clip (see page 71), the title is
enclosed in double quotation marks, for example "TITLE00001".
b) On how to make a thumbnail image of the specified frame, see page
79.
c) You can select the information to be displayed (see page 79). The
factory default setting is display of timecode.
2
Use the SEL/SET button (four-way arrow key) or
MENU knob to select the desired clip.
You can also select clips by the following operations.
Press the PREV button: When FIND MODE on the
ESSENCE MARK page of the MAINTENANCE
menu is set to R.ST, this moves to the previous
REC START essence mark. When FIND MODE
is set to CLIP, this moves to the start of the current
clip, or moves to the first frame of the previous
clip if the PREV button is pressed at the first
frame of the current clip.
Press the NEXT button: When FIND MODE on the
ESSENCE MARK page of the MAINTENANCE
menu is set to R.ST, this moves to the next REC
START essence mark. When FIND MODE is set
to CLIP, this moves to the start of the next clip.
Press the PREV or NEXT button with the F REV
or F FWD button held down: Move to the first
or last clip.
Press the F REV/F FWD button: Move to the
previous or next page.
3
To cue up the selected clip, press the SEL/SET button
or the MENU knob.
To start playback from the selected clip, press the
PLAY/PAUSE button.
The remainder of the thumbnail selection process is the
same as in steps 2 and 3 above.
Sixth clip is selected
from a total of 34 clips.
b)
frame)
Duration of selected clip