Advertisement
3-5. WHITE BALANCE ADJUSTMENT
1. Input ehite pattern. Adjust white balance of drive side, using
service mode VP No. 22 RAMP, No. 23 GAMP and No. 24
BAMP, so that colour temperature is 8600 K + 0 MPCD.
2. Input gray pattern for 10NIT. Adjust white balance of cut-off
side, using service mode No. 25 RCUT, No. 26 GCUT and No.
27 BCUT, so that colour temperature is 8600 K + 0 MPCD.
3. To take tracking, confirm again that colour temperatures of both
side are within the limit of the above standard 8600 K + 0
MPCD. If necessary, re-adjust.
W/B Specification:
H/L difference = 2JND or less
C/O difference = 3JND or less
3-6. PICTURE DISTORTION ADJUSTMENT
•
When performing these adjustment, do receive monoscope
signal.
VP01 (HSIZ)
VP02 (HPOS)
VP03 (VSIZ)
VP04 (LCPN)
VP05 (UCPN)
VP06 (AFAG)
VP07 (AFBW)
VP08 (PAMP)
VP09 (VPOS)
VP10 (VLIN)
VP11 (SCOR)
VP13 (TRAP)
– 22 –
Hide quick links:
Advertisement
Chapters
