hit counter script
Sanyo VPC-CG10BK Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Camcorder
  5. Xacti VPC-CG10BK
  6. Service manual

Sanyo VPC-CG10BK Service Manual

Dual camera sanyo
Hide thumbs Also See for VPC-CG10BK:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Quick Manual
SERVICE MANUAL
CONTENTS
1. OUTLINE OF CIRCUIT DESCRIPTION .....................................3
2. DISASSEMBLY ........................................................................12
3. ELECTRICAL ADJUSTMENT ..................................................17
5. TROUBLESHOOTING GUIDE .................................................23
6. PARTS LIST .............................................................................24
RoHS
This product does not contain any hazardous substances prohibited by the
RoHS Directive.
WARNING
You are requested to use RoHS compliant parts for maintenance or repair.
You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow
the warning given on page 2 when carrying out repair work.)
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same of equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer's instruction.
Design and specifications are subject to change without notice.
NOTE: 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N.S.P. : Not available as service parts.
Design and specifications are subject to change without notice.
SG315/U, U3, U4, U5, UB, EX, EX2, EX4, EX3, EX5, GX2, GX3, GX5, GX, GX4
FILE NO.
VPC-CG10BK
(Product Code : 168 174 01)
VPC-CG10P
(Product Code : 168 174 07)
VPC-CG10G
(Product Code : 168 174 10)
VPC-CG10W
(Product Code : 168 174 18)
VPC-CG10R
(Product Code : 168 174 32)
(U.S.A.) (Canada) (Taiwan)
VPC-CG10EXBK
(Product Code : 168 174 02)
VPC-CG10EXBL
(Product Code : 168 174 04)
VPC-CG10EXG
(Product Code : 168 174 11)
VPC-CG10EXP
(Product Code : 168 174 15)
VPC-CG10EXW
(Product Code : 168 174 19)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)
VPC-CG10GXBL
(Product Code : 168 174 05)
VPC-CG10GXP
(Product Code : 168 174 08)
VPC-CG10GXW
(Product Code : 168 174 12)
VPC-CG10GXBK
(Product Code : 168 174 14)
VPC-CG10GXG
(Product Code : 168 174 16)
(South America) (China) (Australia)
(Hong Kong) (General) (Korea) (Taiwan)
REFERENCE No.SM5310775

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VPC-CG10BK

Summary of Contents for Sanyo VPC-CG10BK

  • Page 1: Table Of Contents

    FILE NO. SERVICE MANUAL VPC-CG10BK (Product Code : 168 174 01) VPC-CG10P (Product Code : 168 174 07) VPC-CG10G (Product Code : 168 174 10) VPC-CG10W (Product Code : 168 174 18) VPC-CG10R (Product Code : 168 174 32) (U.S.A.) (Canada) (Taiwan)
  • Page 2 PRODUCT SAFETY NOTICE The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part designated in the Parts List.

  • Page 3: Outline Of Circuit Description

    1. OUTLINE OF CIRCUIT DESCRIPTION 1-1. CMOS CIRCUIT DESCRIPTION 1. IC Configuration The CMOS peripheral circuit block basically consists of the following ICs. IC911 (MT9J001I12STCV) CMOS imager CDS, AGC, ADC built-in H driver, V driver, serial communication circuit built-in 2. IC911 (CMOS) [Structure] The electric charges which are generated when each pixel is optically converted are in turn converted into signal voltages...
  • Page 4 1-2. CP1 and VF1 CIRCUIT DESCRIPTION 1. Circuit Description 2. Outline of Operation 1-1. Digital clamp When the shutter opens, the reset signals (ASIC and CPU) The optical black section of the extracts averaged values from and the serial signals (“take a picture” commands) from the the subsequent data to make the black level of the output 8-bit microprocessor are input and operation starts.
  • Page 5 4. Lens drive block 5. Video Clip Recording and Playback 4-1. Focus drive 5-1. Recording The 16-bit serial data signals (LENS_SDI) and (LENS_SCLK The signal from the camera block is input to IC101 (ASIC). and LENS_EN) which are output from the ASIC (IC101) are The data that is input to the ASIC is input to SDRAM, and used to drive (FOCUS A +, FOCUS A -, FOCUS B + and FO- converts this data to encoded MPEG4 data, after which it is...
  • Page 6 1-3. PWA POWER CIRCUIT DESCRIPTION 1. Outline 3. Motor System Power Output This is the main power circuit, and is comprised of the follow- BOOST 5 V is output. Feedback for the 5.0 V output is pro- ing blocks. vided to the switching controller (Pin (B7) of IC501) so that Switching controller (IC501) PWM control can be carried out.
  • Page 7 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and When FLCTL signal is input from the ASIC, the stroboscope the CHG signal from microprocessor becomes High (3.3 V), emits light.
  • Page 8 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
  • Page 9 PLLEN ASIC PLL ON/OFF control LCD panel rotation detection (L= panel inversion) HINGE Card detection (L= detection) ZCARD NOT USED NOT USED Battery temperature detection BAT_TEMP ZBAT_OFF Battery OFF detection (L= battery OFF) SREQ Serial communication request signal KEY_2ND Key input 2nd SHUTTER (L= input) ZUSBDET USB detection (L= detection) RESET...
  • Page 10 3. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V (power off: 2.4 V) voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scan- ning is carried out even when the power switch is turned off, so that the camera can start up again.
  • Page 11 MEMO...

  • Page 12: Disassembly

    2. DISASSEMBLY 2-1. REMOVAL OF CABINET LEFT, ST1 BOARD AND LCD When assembling, attachment order. 3, 15 NOTE: Discharge a strobe capacitor with the discharge jig (VJ8-0188) for electric shock prevention.
  • Page 13 1. LCD is opened. 2. Screw 1.7 x 2 3. Cover battery is opened. 4. Screw 1.7 x 3.5 5. Screw 1.7 x 5 6. Screw 1.7 x 5 7. Cabinet top 8. Two screws 1.7 x 3.5 9. Screw 1.7 x 3.5 10.
  • Page 14 2-2. REMOVAL OF CP1 BOARD 1. Holder lens 12. Button power 2. Spacer wire 13. Screw 1.7 x 2.5 3. Screw 1.7 x 3.5 14. Spacer SW unit 4. FPC 15. Unit, control 5. Connector 16. Two screws 1.7 x 3 6.
  • Page 15 2-3. REMOVAL OF TB1 BOARD, LCD AND VF1 BOARD 1. Cover joint 14. Spacer speaker filter 2. Two screws 1.7 x 3 15. Cover LCD front 3. Cover LCD back 16. FPC 4. Shield tape MIC 17. LCD 5. Remove the solder. 18.
  • Page 16 2-4. BOARD LOCATION VF1 board ST1 board TB1 board CP1 board...

  • Page 17: Electrical Adjustment

    URL. ± 20 K and luminosity to 900 ± 20 cd/m . Be careful of han- http://www.digital-sanyo.com/overseas/service/ dling the lump and its circumference are high temperature Place the DscCalDi.exe file, camapi32.dll file and during use and after power off for a while.
  • Page 18 3-6. The adjustment item which in necessary in part exchange CCD Black CCD White Lens Lens Point And Point Factory White Point Adjust- Adjust- Language storage Reset Defect Defect Adjust- Cord Setting ment ment information Setting Detect Detect Setting ment Adjustment registration (Infinity)
  • Page 19 Adjustment value determination is effectuated using below val- Note: ues. Do not vibrate during the adjustment. The adjustment values fulfill the conditions below, they are If readjusting after it has already been adjusted, wait for 15 determined as within specifications. minutes or more for the unit to cool down first.
  • Page 20 3. AWB Adjustment Adjustment value determination is effectuated using the “CHECK”, “CHECK_ND”, “MS”, “MS_M”, “MS_C”, “MS_C2”, “IRIS_PWM1”, “IRIS_PWM2”, “IRIS_PWM3”, “IRIS_PWM4” , “IRIS_PWM5” and “IR_TEMP_AD” values. If CHECK= wc0, wc1, wc2 CHECK_ND= wnc0, wnc1, wnc2 MS= ms1, ms2, MS_M= ms3, ms4, MS_C= ms5, ms6, MS_C2= ms7, ms8, IRIS_PWM1= s1, s2...
  • Page 21 3-13. Firmware uploading procedure Preparation: POWER switch: ON 1. Uploading the firmware should be carried out if the version Setting of pattern box: number (COMPL PWB XX-X) on the replacement circuit board is lower than the version of the distributed firmware. Color temperature: 3100 ±...

  • Page 22: Usb Storage Information Registration

    17.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: CG10 Serial: Rev. : 1.00 4.

  • Page 23: Troubleshooting Guide

    5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER PUSH THE POWER BUTTON SW FOR A WHILE HIGH IC301-24, 51 IC301-25 CHECK UNIT SW CHECK POWER SW KEY INPUT KEY_POWER INPUT IC501-D6, F6 (PON) IC301-9, 36, 59 CHECK IC101, IC301, IC504-4(PON2) CHECK IC302 (VDD)

  • Page 24: Parts List

    636 123 5082 INSTRUCTION MANUAL,CAMERA SOFT GB, CAMERA (English) 636 123 4306 CARTON INNER-SG315/U, VPC-CG10BK,VPC-CG10P, VPC-CG10G,VPC-CG10W,VPC-CG10R 636 123 4313 CARTON INNER-SG315/EX, EXCEPT VPC-CG10BK,VPC-CG10P, VPC-CG10G,VPC-CG10W,VPC-CG10R 636 083 6532 LABEL CARTON BLUE-718EX2, VPC-CG10EXBL,VPC-CG10GXBL 636 074 6589 LABEL CARTON PINK 712EX3, VPC-CG10P,VPC-CG10GXP,VPC-CG10EXP 636 123 5228...
  • Page 26 LOCATION PARTS NO. DESCRIPTION CABINET & CHASSIS PARTS 1 636 122 4895 COVER BATTERY-SG315/J, VPC-CG10BK,VPC-CG10EXBK,VPC-CG10GXBK 636 124 1694 COVER BATTERY-SG315/J2, VPC-CG10EXBL,VPC-CG10GXBL 636 124 1700 COVER BATTERY-SG315/J3, VPC-CG10P,VPC-CG10GXP,VPC-CG10EXP 636 124 1717 COVER BATTERY-SG315/J4, VPC-CG10G,VPC-CG10EXG,VPC-CG10GXG 636 124 1724 COVER BATTERY-SG315/GX5, VPC-CG10GXW,VPC-CG10W,VPC-CG10EXW 636 127 4166...
  • Page 27 10 13 Cabinet 1 SG315/J PARTS LIST 1...
  • Page 28 636 126 5980 SPACER WIRE-SG315/J 636 122 5083 HOLDER JOINT-SG315/J 636 125 8289 LABEL CAUTION-SG217/U 636 122 4871 COVER JOINT BASE-SG315/J, VPC-CG10BK,VPC-CG10EXBK,VPC-CG10GXBK 636 124 1731 COVER JOINT BASE-SG315/J2, VPC-CG10EXBL,VPC-CG10GXBL 636 124 1748 COVER JOINT BASE-SG315/J3, VPC-CG10P,VPC-CG10GXP,VPC-CG10EXP 636 124 1755 COVER JOINT BASE-SG315/J4,...
  • Page 29 Cabinet 2 SG315/J PARTS LIST 2...
  • Page 30 ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 31 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION RB102 645 078 4279 R-NETWORK 100X2 0.063W C1510 303 419 8903 CERAMIC 10U M 6.3V RB106 945 072 8854 R-NETWORK 150X4 1/16W C1511 303 384 6409 CERAMIC 4.7U K 6.3V RB107 945 072 8854 R-NETWORK 150X4 1/16W C1512 303 439 8402...
  • Page 32 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R5042 301 224 8903 MT-GLAZE 100K JA 1/16W COMPL PWB,VF-1 R5043 301 224 8804 MT-GLAZE 100 JA 1/16W 636 122 1320 R5044 301 225 1200 MT-GLAZE 4.7K JA 1/16W R5045 301 225 0104 MT-GLAZE 27K JA 1/16W (VARISTORS)
  • Page 33 LOCATION PARTS NO. DESCRIPTION R5437 301 224 9306 MT-GLAZE 1K JA 1/16W R5438 301 224 9306 MT-GLAZE 1K JA 1/16W (FUSE) F5004 323 031 5609 FUSE 32V 2A (MISCELLANEOUS) 636 123 5167 SPACER ST1 A-SG315/J (N.S.P) 636 123 5174 SPACER MAIN CON-SG315/J (N.S.P) (CONNECTORS) CN541 645 095 9622...

  • Page 34: Circuit Diagrams & Printed Wiring Boards

    CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING .............................C3 OVERALL CIRCUIT ............................C4 POWER CIRCUIT...............................C4 IMAGE SENSOR CIRCUIT ..........................C5 LENS CIRCUIT ..............................C5 MAIN CIRCUIT ..............................C6 SYSTEM CONTROL CIRCUIT ......................... C7 STROBE CIRCUIT .............................C7 CIRCUIT DIAGRAMS CP1 BOARD (PWA) POWER ..........................C8 CA1 BOARD IMAGE SENSOR ........................
  • Page 35 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) 2. All capacitance values in "µF" unless otherwise noted. p=pico farad ; n=nano farad ; µ ,u or U=micro farad 3. All inductance values in "µH" unless otherwise noted. µ...

  • Page 36: Overall Wiring & Block Diagrams

    OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING MIC(R) MIC(L) SPEAKER CN912 CN901 JW178 VDDIO VDDIO VDDIO VDDIO JW177 SDIN0 SDIN0 SDIP0 SDIP0 JW176 SDIN1 SDIN1 SDIP1 SDIP1 BLACK JW651 SCKIN SCKIN ZHINGE SCKIP SCKIP JW175 ZHINGE SDIN2 SDIN2 JW652 SDIP2 SDIP2 BLACK SDIN3...

  • Page 37: Overall Circuit

    POWER CIRCUIT OVERALL CIRCUIT IC501 LENS UNIT AVDD x5 F=3.5 STROBE UNIT SHDNB1 CN141 SWITCHING PVDD1 CONTROL BOOST5V TO DMA SD CARD PVDD2 CN951 SOCKET L5301 DOUT11,12 IC503,L5005 CA1 BOARD VAA2.8 STEP UP REGULATOR CIRCUIT TO DMA LOUT11,12 PAON2 CP1 BOARD ST1 BOARD IC911 IC951...

  • Page 38: Image Sensor Circuit

    IMAGE SENSOR CIRCUIT LENS CIRCUIT ZPI_AD IC101 FPI_AD CMOS_1.8 VDDIO VDDPLL VAA_2.8 VAAPIX VDD_SLVS_TX TO IC101 SYSTEM ASIC IC951 LENS DRIVER CN951 LENS_BLOCK BOOST5V VM1,VM2,VM3,VM4,VCC ZOOM_PI_AC VDD3 VDDIO VDDPLL VAAPIX VDD_SLVS_TX VDD3 OPVDD,ADVDD,DAVDD,DVD33,ADVRH VDD1.8 DVDD25 ZOOM_PI Z_SENSE SHUTTER CMOS_SHUTTER ZPIOUT COMPD2 IC911 FLASH...

  • Page 39: Main Circuit

    MAIN CIRCUIT A_I2CSDATA A_I2CSCLK ADCK CN901 BtoB BOARD LVDS X1102 48.000MHz CMOS_FLASH, CMOS_SHUTTER BLON PAON1, PAON2 PWA BLOCK POWER SUPPLY SHUTTER+, PS LENS_SCLK, LENS_SDI PON, PON2 IC951 LENS_RESETN, LENS_EN LENS LENS_SDO DRIVER STATE1, STATE2 FPIOUT, ZPIOUT CN951 LENS LENS_48M UNIT LENS_TEMP HOTLINE MRST...

  • Page 40: System Control Circuit

    SYSTEM CONTROL CIRCUIT STROBE CIRCUIT BOOST 5V CHARGING CIRCUIT ZCHGDONE VDD2 ZCHG_DONE ALWAYS3.2V BACKUP3.2V C5401 T5403 D5402 ST_CHG VDD3 CN542 TO DMA-ST1 ST_CHG F5004 VDD1 POWER FILTER BAT_TEMP OSCILLATION RECTIFIER C5412 BAT_TEMP TO BATTERY TRANSFORMER CIRCUIT IC302 BLOCK RESET BATTERY BACKUP VSS2 CN541...

  • Page 41: Circuit Diagrams

    CIRCUIT DIAGRAMS CP1 BOARD (PWA) POWER P1-17400/SG315-U VOLTEGE: VIEW MODE, LCD ON UNREG UNREG USE BATTERY TO DMA F5003 F5002 2A32V 2A32V UNREG_A UNREGSY TO SYA F47K2R0C3LFND F47K2R0C3LFND 1608 1608 1AV4L2KN6R8NG LQH3NPN6R8NM0L LCDAN L5007 6.8;N H=1.5 3.0X3.0 UP03397 Q5008 C5072 R5075 15K;1/16D R5001...

  • Page 42: Ca1 Board Image Sensor

    CA1 BOARD IMAGE SENSOR CN912 VDDIO C1-17400/SG315-U VDDIO VDDIO VOLTAGE: VIEW MODE, LCD ON SDIN0 SDIN0 SDIP0 SDIP0 SDIN1 SDIN1 SDIP1 SDIP1 SCKIN SCKIN SCKIP SCKIP L9101 FBMH1608HL601 SDIN2 SDIN2 SDIP2 SDIP2 SDIN3 SDIN3 R9149 0;1/16Z A_GND SDIP3 SDIP3 1608 AGND VAA2.8 VAA2.8...

  • Page 43: Cp1 Board (Caa) Sensor Power

    MAIN CIRCUIT WAVEFORMS CP1 BOARD (CAA) SENSOR POWER TEST POINT TEST POINT WAVEFORM WAVEFORM LOCATION LOCATION CN901 VDDIO VDDIO IC101 IC101 VDDIO PIN AE12 PIN AB23 XO 1V/div D4CKO 10ns/div 1V/div SDIN0 10ns/div C2-17400/SG315-U SDIN0 SDIP0 SDIP0 IC101 IC101 SDIN1 SDIN1 PIN AB25 PIN P3...

  • Page 44: Cp1 Board (Dma) Main

    CP1 BOARD (DMA) MAIN D1-17400/SG315-U VOLTAGE: VIEW MODE, LCD ON VDD1.8 DSA12 R8 IO4 SA12 R9 IO5 DQS3 DQS3 R10 IO13 R11 DQ0 VSSd ZDSCS R12 NC ZRAS T1 NC /RAS DSA2 ZCAS T2 SA2 /CAS ONENAND_CLK ZDSWE T3 CLKo ONENAND_AVD DQM3 T4 AVDBo...
  • Page 45 CP1 BOARD (DMA) MAIN [UPPER-LEFT] D1-17400/SG315-U VOLTAGE: VIEW MODE, LCD ON C1063 0.1;B C1057 0.1;B C1064 0.1;B C1065 0.1;B C1053 0.1;B C1054 0.1;B R1007 A_VDD3 0;1/16Z VDD3 R1004 0;1/16Z A_VDD1.2 VDD1.2 R1003 0;1/16Z A_VDD1.8 VDD1.8 AC11 AC12 AC19 AC18 AA16 AA15 AC10 AA10...
  • Page 46 CP1 BOARD (DMA) MAIN [UPPER-RIGHT] VDD1.8 DSA12 R8 IO4 SA12 DQS3 R9 IO5 DQS3 R10 IO13 R11 DQ0 VSSd ZDSCS R12 NC ZRAS T1 NC /RAS DSA2 ZCAS T2 SA2 /CAS ONENAND_CLK ZDSWE T3 CLKo ONENAND_AVD DQM3 T4 AVDBo DQM3 DQ24 T5 IO1 DQ24...
  • Page 47 BAT+ U2 VSS DGATEO BAT+ V2 VSS DSRON BAT+ EV3XA W2 VSS DCKE BAT+ AC2 VSS DA12 BAT+ AD2 VSS DBA0 BAT+ AE2 VSS ZDWE A3 VSS ZCAS CP1 BOARD (DMA) MAIN [LOWER-LEFT] QEV3XA------N AL3.2V AL3.2V B3 VSS ZRAS C3 VSS DBA1 ST_CHG AC3 VSS...
  • Page 48 DGATEO DSRON EV3XA DSCKE DCKE DSA12 DA12 DSBA0 DBA0 ZDSWE ZDWE ZCAS ZCAS XA------N CP1 BOARD (DMA) MAIN [LOWER-RIGHT] ZRAS ZRAS DSBA1 DBA1 ZDSCS ZDCS DSA10 DA10 STEM ASIC DSA0 DSA1 DSA2 DSA3 =1.34 DQ15 DQ15 DQ14 DQ14 DQ13 DQ13 DQ12 DQ12 DQM1...

  • Page 49: Cp1 Board (Tca) Lens

    CP1 BOARD (TCA) LENS BOOST5V TO DMA 3.3V REG IC952 F1-17400/SG315-U XC6221S04XG QXC6221S04XGP VOUT TO SYA CN951 VDD3 ZOOM_A- ZOOM_A- ZOOM_B+ ZOOM_B+ ZOOM_A+ ZOOM_A+ VDD3 VDD3 ZOOM_B- ZOOM_B- R9501 VDD1.8 DRIVE+ DRIVE+ VDD1.8 R9502 DRIVE- 5.1;1/10F DRIVE- TO DMA 5.1;1/10F HALL_IN+ HALL_IN+ HALL_OUT-...

  • Page 50: Cp1 Board (Sya) System Control

    CP1 BOARD (SYA) SYSTEM CONTROL Y1-17400/SG315-U BOOST5V VOLTAGE: VIEW MODE, LCD ON AL3.2V AL3.2V TO DMA BACKUP3.2V UNREGSY TO PWA ZBKUPCTL HINGE BAT_TEMP TO DMA ZSREQ TO TCA,PWA 3.2V 2.4V 2.8V 3.3V PLLEN R3002 330;1/16J SW3.2ON BACKUP_BAT TO DMA SW3.2ON MR SENSOR IC303 Q3004...

  • Page 51: St1 Board Strobe

    ST1 BOARD STROBE LCD CIRCUIT WAVEFORMS TEST POINT WAVEFORM LOCATION CN542 CN171 PIN 14 S1-17400/SG315-U TO BATTERY DCLK VOLTAGE: STROBE AFTER CHARGE 2V/div 20ns/div FLASH REFLECTOR STROBE UNIT CN171 CN541 1AV4L17B0620G PIN 24 T5403 RE0208DA JW541 AWG30 TTRN-0530H-018-T D5402 BROWN F5004 2.0X1.25 2V/div...

  • Page 52: Vf1 Board Lcd Connector

    VF1 BOARD LCD CONNECTOR Z1-17400/SG315-U JW177 AWG32/AWG30 CN171 LCDRESET GREST SHDB LCDEN SCEN JW178 AWG32/AWG30 LCDCK TO SPEAKER LCDSD RB172 WHITE LCDD7 DIN7 LCDD6 DIN6 JW176 AWG32/AWG30 LCDD5 DIN5 LCDD4 DIN4 RB173 LCDAN LCDAN BLACK TO TB1 JW652 LCDD3 DIN3 LCDCA LCDCA LCDD2...

  • Page 53: Printed Wiring Boards (P.w.b.)

    PRINTED WIRING BOARDS (P.W.B.) CP1 P.W.B. (SIDE A) R5032 R5072 R5071 C5303 C5074 C5032 C5072 R5078 C5073 R5301 R5031 R5074 Q5007 Q5008 C1511 C1512 C1017 C1018 C5025 R1516 R1012 C5023 C1501 R5023 C5024 R1026 R1537 X1102 C1509 C5008 C5304 R5021 R1011 C1515 IC153...

  • Page 54: Cp1 P.w.b. (Side B)

    CP1 P.W.B. (SIDE B) VR501 C5028 L5003 C5027 VR501 RB102 C5029 C5021 C5009 CL501 R1801 C5062 R1102 D5002 C1817 C5010 F5002 IC302 R1025 C1047 R9502 R1020 L1003 C9508 C1065 C9516 C1054 C9512 C9511 R9505 R3012 RB313 C9551 R3011 X3002 C3014 R3007 C3008 C9017...

  • Page 55: Ca1 P.w.b. (Side A & B)

    CA1 P.W.B. (SIDE A) TB1 P.W.B. (SIDE A) TB1 P.W.B. (SIDE B) CA1 P.W.B. (SIDE B) CL913 CL912 RB911 CL914 CL911 R9131 C9102 C9136 C9142 IC911 C9141 C9135 C9138 C9119 L9104 L9103 R9148 CN912...

  • Page 56: St1 P.w.b. (Side A & B)

    VF1 P.W.B. (SIDE A) VF1 P.W.B. (SIDE B) ST1 P.W.B. (SIDE A) ST1 P.W.B. (SIDE B) CN173 C5412 C5436 C5437 D5404 F5004 Q5402 C1872 SIDE-B R1870 SG315_VF1 Z6301 J2800BA R1867 D5402 C1871 T5403 R5431 C1866 C1857 SIDE-A R5437 SG315_VF1 J2800BA C1714 C1709 C1706...
  • Page 58 SANYO Electric Co., Ltd. Osaka, Japan Jan./’09...

This manual is also suitable for:

Vpc-cg10pVpc-cg10exbkVpc-cg10exblVpc-cg10gVpc-cg10exgVpc-cg10exp ... Show all

Table of Contents