NEAR MANUAL BACK LIGHT ZOOM PAN-TILT RESET AUTO ZOOM SLOW FAST DIRECTION SET RM-EV100 CAMERA SELECT FOCUS AUTO MANUAL NEAR DATA SCREEN BACK LIGHT FOCUS AUTO MANUAL NEAR DATA SCREEN BACK LIGHT...
Page 15
— POSITION1~6 RESET PRESET DATA SCREEN BACK LIGHT PRESET RESET POSITION DATA SCREEN BACK LIGHT PRESET RESET POSITION...
Page 23
English Owner’s Record For customers in the U.S.A. This equipment has been tested and The model number and the serial found to comply with the limits for a number are located on the bottom Class B digital device, pursuant to Part exterior.
Page 24
For the customers in If you have any questions about this product, you may call; Netherlands Voor de Klanten in Sony Customer Information Service Nederland Center 1-800-222-7669 or http://www.sony.com/ Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA).
English Table of Contents Overview Features ................26 Locations of Controls ........... 27 Main Unit ..............27 Remote Commander ............. 28 Basic Operations Preparations ..............30 Installation ..............30 Connections ..............32 Turning on the Power ........... 33 Pan/Tilt Operation ............34 Adjusting the Camera ...........
Overview Features • The CCD features 380,000 effective picture elements for the EVI-D100 and 440,000 for the EVI-D100P, which enables high-resolution shooting. • In addition to high-speed pan/tilt action, improvement of the noise reduction mechanism lets you use Color Video Camera for a variety of purposes.
Locations of Controls For details, see the pages indicated in parenthesis. Main Unit 6 VIDEO jack (32) 1 POWER lamp (33) 7 S VIDEO jack (32) 2 STANDBY lamp (35) 8 IR SELECT switch (35) 3 Lens 9 DC IN 12V jack (32) 4 Sensor for the Remote Commander (35) 0 VISCA OUT jack (32)
Locations of Controls Remote Commander 8 POSITION buttons (37) 1 CAMERA SELECT buttons (35) Numeric buttons (Button 1 also 2 FOCUS buttons (36) works as the STD button. Button 2 AUTO button also works as the REV button.) FAR button (34) NEAR button PRESET button...
Basic Operations Preparations Notes Installation • Do not grasp the camera head when carrying the video camera. Be sure to place the main unit on a flat • Do not turn the camera head surface. manually. Doing so will result in the If you must place the camera on an camera malfunctioning.
Page 31
To attach the camera to a tripod Use a tripod with screws meeting either of the following specifications. length ISO standard: length 4.5 mm ±0.2 mm ASA standard: length 0.197 inches Basic Operations...
VISCA IN Computer, TV or VCR with a video input jack to VISCA OUT To VISCA IN of other EVI-D100/D100Ps (when connecting to more than one camera) AC power adaptor MPA-AC1 (supplied) to AC outlet to DC IN 12V...
Notes Turning on the Power • You cannot connect your Color Video Camera to a computer that is Connect the main unit to an AC not equipped with either video input outlet using the supplied AC or an S-Video input jack. You might power adaptor and power cord.
Pan/Tilt Operation If you accidentally move the camera head with your hand CAMERA SELECT Release the camera head immediately to let it return to the previous position automatically. If you move the camera head and hold it over a prolonged PAN-TILT period, the camera’s power turns off.
Page 35
Note Sensor for the Remote Commander Repeat the above-mentioned procedure for each Remote Commander if you are using more than one Remote Commander. This is because the setting is performed by changing the signal emitted from each Remote Commander, not by changing the setting of the camera itself.
Adjusting the Camera Zooming NEAR Press either of the four ZOOM MANUAL buttons. BACK LIGHT Subject Subject ZOOM PAN-TILT appears appears RESET AUTO farther closer. ZOOM SLOW FAST away. (Telephoto) (Wide angle) DIRECTION SET RM-EV100 Zooms in Zooms in or out from or out the subject from the...
Having the Camera Memorize the Setting — Presetting feature Up to six combinations of settings Recalling the memorized (position, zooming, focusing and back setting lighting) can be preset. Press any of the POSITION buttons 1 – 6 on which your settings have been saved.
General Troubleshooting Symptom Remedy Symptom Remedy The picture does • Make sure the The unit cannot be • Press the CAMERA not appear on the connections are operated when a SELECT button screen of your made correctly. button on the whose number is the computer.
Precautions After operating the unit with an AC About Backup power adaptor, disconnect the AC power adaptor from the wall outlet if Settings such as the camera position the set is not to be used for an are erased when you disconnect the extended period of time.
Precautions When You Discard Remove the two screws 1 and detach the cover of the sensor for Color Video Camera the Remote Commander. For environmental reasons, take out the lithium battery from the camera and discard it appropriately. Hold the lower part of the pan cabinet (side) with your fingers, and pull it up while stretching it until it comes off.
Maintenance Hold the board on which the lithium battery is attached using long-nose pliers. Then, bend it in Clean dirt and soil from the cover with the direction of the arrow a soft cloth or tissue paper. illustrated below to detach the battery.
Specifications Video S/N 50 dB System Pan/tilt action Horizontal: ±100 degrees Video signal Maximum speed: EVI-D100: NTSC Color, 300 degrees / s, JEITA standards Vertical: ±25 degrees EVI-D100P: PAL Color, Maximum speed: CCIR standards 125 degrees / s Picture element...
113 × 120 × 132 mm verify that it was recorded × 4 × 5 in.) successfully. (w/h/d) SONY WILL NOT BE LIABLE Remote Commander: FOR DAMAGES OF ANY KIND 56 × 26 × 210 mm INCLUDING, BUT NOT × 1 × 8 in.)