Additional Safety Information; Lithium Battery Notice - Lenovo 8010 User Manual
Lenovo user guide desktop pc 8010, 8792, 8796, 8800, 8804, 8808, 8813
Hide thumbs
Also See for 8010:
- Hardware maintenance manual (388 pages) ,
- Hardware maintenance manual (390 pages)
Table of Contents
Advertisement
v Do not bend or flex CD/DVD discs, or force them into the computer or their
v Check CD/DVD discs for cracks before each use. Do not use cracked or
Additional safety information
To avoid a shock hazard:
v Do not connect or disconnect any cables or perform installation, maintenance,
v Connect all power cords to a properly wired and grounded electrical outlet.
v Connect to properly wired outlets any equipment that will be attached to this
v When possible, use one hand only to connect or disconnect signal cables.
v Never turn on any equipment when there is evidence of fire, water, or
v Disconnect the attached power cords, telecommunications systems, networks,
v Connect and disconnect cables as described in the following table when
Lithium battery notice
When replacing the lithium coin cell battery, use only the same or an equivalent
type that is recommended by the manufacturer. The battery contains lithium and
can explode if not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
x
User Guide
packaging
damaged discs
Danger
Electrical current from power, telephone, and communication cables is
hazardous.
or reconfiguration of this product during an electrical storm.
product.
structural damage.
and modems before you open the device covers, unless instructed otherwise
in the installation and configuration procedures.
installing, moving, or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
Caution
Danger of explosion if battery is incorrectly replaced.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
- Quick Links:
- Specifications
- Installing Memory
Hide quick links:
Advertisement
Table of Contents
