Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for J2 630
Summary of Contents for J2 630
- Page 1 J2 630 Integrated Touchscreen Computer System Manual December 2010...
- Page 2 Copyright © 2010 J2 Retail Systems Change history Version 1.0 Release December 2, 2010 Version 1.1 change power usage number to match testing and add IEA “One Watt Initiative” statement. 630 System Manual Version 1.1 December 14, 2010...
- Page 3 630 System Manual Version 1.1 December 14, 2010...
-
Page 4: Table Of Contents
Audio..........................19 Cash Drawer Port ......................19 CMOS Reset ......................... 21 Mini PCI-E ........................22 Power Supply ........................ 23 Typical Power Consumption 630.................. 24 Packing List ........................25 Standard Items ......................25 System Installation ......................26 Counter Top Base ......................26 VESA Mounting ...................... - Page 5 Driver Download ......................50 Additional Drivers/Utilities ..................50 Optional Items ......................... 51 Customer Display Option ....................52 Connecting the Cable for a J2 630/615/580 customer display ........52 Dip Switch and Software Setting .................. 52 J2 630/615/580 UPS ......................54 Specifications ........................ 54 Hardware ........................
-
Page 6: Overview
® and Linux™. The “all in the head” design means that the J2 630 can serve as a counter top, or as a wall or a pole mounted unit all in the same computer. With the standard counter top base, VESA mounting points and optional wall mount brackets, the versatile 630 can fit numerous touch screen applications. - Page 7 630 System Manual Version 1.1 December 14, 2010...
-
Page 8: Specifications
3 Track (on PS2 port, wedge type) iButton Dallas Key iButton/MSR (on PS2 port, wedge type) or iButton only MSR/Finger Print Reader (Digital Persona) or Finger Print Reader Biometrics only WIFI Optional internal 802.11n (a/b/g compatible) wireless LAN 630 System Manual Version 1.1 December 14, 2010... - Page 9 10.4" or 12” Second LCD display, with or without touch, Second Display powered from the J2 630 Customer Customer Side VFD display with 2 x20 characters, powered from 630 Display 2 hour DC UPS, mounts in base of unit Mounting Standard Counter Top Base, Adjustable Viewing Angle 0-100°...
-
Page 10: System
System The J2 630 uses the same dynamic design as the J2 580, J2 615 and J2 650 computers. This allows for different systems to be integrated at the same customer site, maintaining a well balanced look and feel for your important installations. All Peripherals are the same as used on the J2 580 and J2 615. -
Page 11: I/O Ports
The function of the button can be controlled by the OS. Should the J2 630 hang for some reason, note that it can always be powered off by holding the On / Off button in for four seconds. -
Page 12: Hard Disk Drive / Solid State Drive
Hard Disk Drive / Solid State Drive The J2 630 has one drive bay that supports a 2.5 inch SATA HDD or SDD. The standard drive supplied is a 160GB SATA 3.0Gb/s HDD. The SSD or HDD can be accessed simply by loosening the one screw on the drive bay panel on the right side of the unit. -
Page 13: System Board
The slide in / out design of the J2 630 system board makes for easy memory upgrades of servicing if every needed. The system board can be swapped out in less than one minute. -
Page 14: Lcd Display
0, 90, 180 or 270 degrees without any loss of performance. Secondary Display Port A secondary video display is supported on the J2 630 and can be set as the primary or secondary display. Secondary video displays can be configured as a Twin, Intel Dual Display Clone or Extended Desktop. -
Page 15: Usb Ports
USB ports The J2 630 has five external and two internal USB 2.0 ports. The four external ports are located in the cable well and one on the side of the unit. In addition there are two internal USB ports used as follows: one is used for the optional Finger Print Reader and is located on the MSR connecting point;... -
Page 16: Serial Ports
Both serial (COM) ports 3 and 4 can be BIOS enabled to provide power to external devices. The J2 630 is shipped standard with serial 3 & 4 strapped to supply +12V to pin 9 of the DB9 connector if enabled in the BIOS. - Page 17 Serial Ports BIOS Setting Serial Port(s) Power Enable 630 System Manual Version 1.1 December 14, 2010...
- Page 18 Pin 8 Pin 5 Pin 10 Pin 9 The J2 Cable Adaptor (supplied) RJ45 to DB25 J2 Serial Pinter Cable Pin-out when using 8 wire CAT5/6 cable RJ45-10 Pin Signal DB25 Signal RJ45- 8 Pin Signal DB25 Signal Pin 1...
-
Page 19: Audio
Audio Microphone in and Headset out Cash Drawer Port The 630 has one cash drawer port that can support one cash drawer directly, or two cash drawers when using a “Y” splitter cable. The “Y” splitter cable is the same type as would be used with an EPSON printer. - Page 20 The application may address the Cash Drawer port in a number of ways. They are: 1) Using the J2 supplied OPOS drivers for Windows 7, XP Pro, POSReady and XP Embedded. 2) Using the J2 supplied Virtual COM port for CE.NET, Windows 7, XP Pro, POSReady...
-
Page 21: Cmos Reset
CMOS reset jumper JP1 for a few seconds and then removing it. This would normally only be needed to clear an unknown password from CMOS otherwise the normal BIOS load defaults function could be used. JP1 Location 630 System Manual Version 1.1 December 14, 2010... -
Page 22: Mini Pci-E
Mini PCI-E The onboard Mini PCI Express connector is normally used for the optional internal 802.11n wireless LAN card. Mounting Screw 630 System Manual Version 1.1 December 14, 2010... -
Page 23: Power Supply
Power Supply The J2 630 uses a 95 watt notebook type power supply that is normally mounted in the base of the unit. The power supply is rated with an output of 19 VDC 4.74 Amps and has an input rating of 100-240VAC at 50~60Hz 1.4 Amps maximum. The power supply typically has an efficiency rating of 85% under light loads, with a 90% or better rating under heavy loading. -
Page 24: Typical Power Consumption 630
Typical Power Consumption 630 The typical power consumption of the 630 is much lower that a desktop computer and more comparable to a notebook computer. Using the Intel’s Atom processors and Intel chipset allows for much lower power consumption than previous generations of POS computers. This, when coupled with J2 software power reduction utilities, can greatly reduce the system’s total carbon... -
Page 25: Packing List
2: AC Power cord 3: Three Serial RJ45 to DB9 Adaptor 4: One Serial Printer Cable Standard Items 1: System with (2:) AC power cord 4: Printer Cable 3: COM Cable (1) 630 System Manual Version 1.1 December 14, 2010... -
Page 26: System Installation
System Installation Counter Top Base The J2 630 is shipped with a counter top base which allows for the head to be adjusted from 0-90°. To remove the integrated head from the base, loosen the thumbscrew located on the back of the unit under the hinge of the counter top base, as shown below. - Page 27 To mount the J2 630 to the base, do the reverse (as shown below): a. attach the panel to the desk mount hinge bracket and slide it into the position, as shown by the red arrows b. Tighten the thumbscrew to finish the installation 630 System Manual Version 1.1 December 14, 2010...
-
Page 28: Vesa Mounting
VESA Mounting The four base mounting bracket screws can be remove and these mounting point may be used with most 75mm VESA mounting brackets. VESA Mounting Points 630 System Manual Version 1.1 December 14, 2010... -
Page 29: Wall Mount Bracket Installation
The bracket slides on to the J2 630 mount posts, as shown. Normally the bracket would already be mounted to the wall or a VESA mount and the 630 would be hung on the bracket. Once in place the thumb screw would be tightened. -
Page 30: Msr Installation
Remove the 2 screws b. Connect the cable. c. Slide the MSR into the position and tighten the screws to finish the installation. Be careful not to pitch the cable when installing. 630 System Manual Version 1.1 December 14, 2010... -
Page 31: Ssd/Hhd Access
SSD/HHD Access Loosen the screw Slide the SSD/HDD Module (as shown) 630 System Manual Version 1.1 December 14, 2010... -
Page 32: Removing The Power Supply Adaptor
Removing the Power Supply Adaptor Remove the two screws to release the adaptor and the bracket. 630 System Manual Version 1.1 December 14, 2010... - Page 33 Replacing the Mother Board Loosen the two thumbscrews (you may require a screw driver) Pull the handle in the direction as shown order to release the mainboard tray from the system 630 System Manual Version 1.1 December 14, 2010...
-
Page 34: Bios Settings
OS. This screen also displays the BIOS Version, BIOS Build Date, Processor type, speed and DRAM memory size. The memory size will reflect the amount of system memory available minus the amount used by the graphics controller. Main screen 630 System Manual Version 1.1 December 14, 2010... -
Page 35: Advanced Settings
Configuration, SATA Configuration, SuperIO (ports), Hardware Health Status, Power Options, Power Configuration for the COM and VGA ports, and USB configurations are all set and viewed from this screen. Advanced Setting Screen 630 System Manual Version 1.1 December 14, 2010... -
Page 36: Sata Configuration
By selecting the desired drive on the screen that drives information can be display by typing the Enter disk as soon below. The J2 630 does have a option for install a second Flash SSD drive internal to the unit. If install the drive information will be displayed as the second drive. - Page 37 Drive Information Screen 630 System Manual Version 1.1 December 14, 2010...
-
Page 38: Super I/O Configuration
This submenu allows for the setting of the parallel and serial ports I/O address, IRQ lines. The I/O ports and IRQ settings are normally only changed to support legacy software. Configure Super I/O Chipsets screen 630 System Manual Version 1.1 December 14, 2010... -
Page 39: Hardware Health Status
Hardware Health Status The status for the System Board voltages and temperatures are displayed seen on this screen. Hardware Health Status Screen 630 System Manual Version 1.1 December 14, 2010... -
Page 40: Power Option
AC power was lost. The RTC has an alarm function that can be used to turn the 630 on at a preset time of day. This function is enabled and wake up time can also be set here. -
Page 41: Power Configuration Com/Vga Ports
Power Configuration COM/VGA Ports On this screen the optional power supply can be enabled for both the secondary video port and COM3 and COM4 as shown below. 630 System Manual Version 1.1 December 14, 2010... -
Page 42: Usb Configuration
USB devices connected to the system. This screen displays the total number of USB keyboards, USB mice or USB drives installed that will function in DOS. USB Configuration screen 630 System Manual Version 1.1 December 14, 2010... - Page 43 DOS as drive A, and any device larger will boot up as drive C. By using the USB Mass Storage Device Configuration option set to Hard Disk the device will always boot as drive C no matter what size it is. USB Mass Storage Device Configuration 630 System Manual Version 1.1 December 14, 2010...
-
Page 44: Lcd Brightness Control
High Performance Event Time This setting needs to be disabled to install the WEPOS OS. Once installed it may be re- enabled. It may also need to be disables for some older version of Linux. 630 System Manual Version 1.1 December 14, 2010... -
Page 45: Display Oem Logo
Display OEM Logo The BIOS can display two types of OEM logos on boot up. The default is a small J2 logo in the upper right hand corner. With this setting BIOS POST test messages can be seen during boot up. The second type which is enabled by this entry is a full screen J2 logo. -
Page 46: Boot Settings
630 hard drive. Both have been tested with the 630. For a diskless 630 system there is good support in the Linux community for remote boot. Unfortunately the same cannot be said for the Windows environment. - Page 47 If more than one bootable device is in the system the boot order can be set in this menu. If a bootable USB storage device is plugged in at boot up the 630 will boot from that device by default. If this is not desired the boot order can be changed here. A list of detected drives will be displayed with the current boot order.
- Page 48 If you want the system always to boot from the internal hard drive even if a boot USB device is plug in you can set this item to ”HOUC”. Always First Boot Device Priority Screen 630 System Manual Version 1.1 December 14, 2010...
-
Page 49: Exit Options
BIOS changes. It is not necessary to exit setup from this screen. To discard any BIOS setup changes you can type the ESC key from any screen to exit. Exit Options Screen 630 System Manual Version 1.1 December 14, 2010... -
Page 50: Driver Installation
Driver Installation Driver Download If you did not purchase your operating system from J2 you may download the drivers for the 630 system from the J2 web site at” http://www.j2retailsystems.com/support/630/. For Windows XP there are five drivers that need to be installed. They are:... -
Page 51: Optional Items
Optional Items The J2 630 computer supports all the same option modules (as shown below) on the J2 580 product, and also includes the UPS (not shown below): VESA/Wall Mount Bracket MSR Module (front swipe) Finger Print / MSR-Finger Print Combo iButton / iButton-MSR combo Secondary Display 12”... -
Page 52: Customer Display Option
Customer Display Option Connecting the Cable for a J2 630/615/580 customer display Cable must be fitted correctly. The end with the shrink sleeve goes into the display, the other end to COM3 or COM4. Normally COM4 power is already enabled on that port. - Page 53 A newer version of the customer display is now available that does not uses switch but a software setup utility to configure the display. The configuration utility is available on the J2 support page of the web site. 630 System Manual...
-
Page 54: J2 630/615/580 Ups
J2 630/615/580 UPS Specifications Batteries Run Time 2 hours for the standard J2 630, run time will vary depending on the application loading Power In 19 Volts DC Power Out 13-16.8 Volts DC, 8 amps maximum Data Interface RS232 cable, RJ45 connector 2 –... -
Page 55: Software Setup In Xp
4: Under Select manufacturer select Generic. Select the COM port you wish to use in the On port drop down menu. Be sure this port is not used for anything else (printer) or the driver will not install. Select model should be Custom. Click Next>. 630 System Manual Version 1.1 December 14, 2010... - Page 56 5: The default values for the Interface Configuration are what the J2 UPS uses, therefore just click Finish. 6: When returned to the Power Options Properties window, click Apply to save the configuration. It will take a number of seconds to configure. Once done the Details should show Manufacturer: Generic and Model: Custom and the UPS and driver should be working.
-
Page 57: Status Led
There is one green status LED on the UPS. This can be viewed when looking into the top of the base, as shown in the picture below: 630/580 UPS STATUS LED Add picture here The status LED can be used to determine what mode the UPS is running in. Please refer...