Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DWR-925
Summary of Contents for D-Link DWR-925
-
Page 1: User Manual
Version 1.00 | 05/16/2014 User Manual 4G LTE VPN Router DWR-925... -
Page 2: Preface
Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. -
Page 3: Table Of Contents
Manual VPN Setup ..............43 Manual Internet Connection Setup ......14 VPN Dynamic IP ..............44 Static IP (assigned by ISP) ...........14 Advanced ..................46 Dynamic IP (DHCP) ............15 Virtual Server ................46 PPPoE .................16 Application Rules ..............47 PPTP ..................17 QoS Engine................48 D-Link DWR-925 User Manual... - Page 4 Wireless Modes ................98 System Check ...............66 Networking.Basics............99 Schedules ................67 Check your IP address ...............99 Status ....................68 Statically Assign an IP address ..........100 Device Info ................68 Log ...................69 Technical.Specifications..........101 Statistics .................70 Wireless ..................71 IPv6 Status ................72 Support ..................73 D-Link DWR-925 User Manual...
-
Page 5: Product.overview
Power Adapter If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DWR-925 will cause damage and void the warranty for this product. -
Page 6: System Requirements
• Firefox 3.0 or higher • Safari 3.0 or higher • Chrome 2.0 or higher Windows . Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link DWR-925 User Manual... -
Page 7: Introduction
Introduction The D-Link DWR-925 4G LTE VPN Router is an easy to deploy high performance Virtual Private Network (VPN) router with mobile connectivity to allow easy access to mobile broadband networks. Create a powerful private network for your home or small office with easy setup tools, advanced configuration options, and built-in security features. -
Page 8: Features
Features •.Reliable.and.Versatile - The D-Link DWR-925 lets you connect to your 3G / 4G mobile connection with fast downlink speeds of up to 100 Mbps and uplink speeds up to 50 Mbps, giving you the speed you need for fast, responsive Internet access. -
Page 9: Hardware Overview
Connect Ethernet devices such as computers, switches, and NAS. WAN Port The auto MDI/MDIX Internet port connects to your cable or DSL modem via an Ethernet cable. Power Receptor Connects to the included power adapter. Power Switch Turns the device on or off. D-Link DWR-925 User Manual... -
Page 10: Front Panel
Section 1 - Product Overview Hardware Overview Front Panel SIM Card Slot Unscrew the cover and insert a 3G or 4G LTE SIM card into this slot for mobile broadband access. D-Link DWR-925 User Manual... -
Page 11: Leds
Solid Green: Signal strength is at level four or five (strong) Solid Green: WLAN is active and available WLAN Blinking Green: Data is being transferred via WLAN Solid Green: UMTS/HSDPA/HSUPA/HSPA+/LTE connection is established Blinking: Data is being transferred via 3G or LTE D-Link DWR-925 User Manual... -
Page 12: Installation
SIM card while the router is in use. 3. Connect the power adapter to the socket on the back panel of your DWR-925. Plug the other end of the power adapter into a wall outlet or power strip and turn the device on. -
Page 13: Wireless Installation Considerations
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. -
Page 14: Configuration
Section 3 - Configuration Configuration This section will show you how to configure your new D-Link mobile router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.0.1). -
Page 15: Setup
Internet.Connection.Setup.Wizard or you can manually configure using the Manual.Internet.Connection.Setup wizard. Click Internet.Connection.Setup.Wizard to begin. If you want to enter your settings without running the wizard, click Manual.Internet.Connection.Setup and refer to “Manual Internet Connection Setup” on page 14. D-Link DWR-925 User Manual... -
Page 16: Internet Connection Setup Wizard
Click Prev to go back to the previous page or click Cancel to close the wizard. Note: The DWR-925 has a WAN failover feature that allows the router to switch to a 3G / 4G connection if the WAN connection is down or unavailable. - Page 17 Connection (L2TP): Choose this connection if you have installed a SIM card into the DWR-925. See “4G LTE / 3G” on page 19 for 4G LTE / 3G Connection: information about how to configure this type of connection.
-
Page 18: Manual Internet Connection Setup
MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DWR-925 User Manual... -
Page 19: Dynamic Ip (Dhcp)
ISP. You can use the Clone.button to replace the Internet port’s MAC address with the MAC address of your PC. Auto-reconnect: This feature enables this product to renew the WAN IP address automatically when the lease time has expired. D-Link DWR-925 User Manual... -
Page 20: Pppoe
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Auto-reconnect: The device will automatically reconnect to your PPPoE connection automatically. D-Link DWR-925 User Manual... -
Page 21: Pptp
Internet, and disconnect if there is no traffic after the time period defined by the Maximum.Idle. Time.setting. Maximum Idle Time: The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature. D-Link DWR-925 User Manual... -
Page 22: L2Tp
Internet, and disconnect if no traffic after time period of Maximum Idle Time. Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set it to 0 or choose Always-on to disable this feature. D-Link DWR-925 User Manual... -
Page 23: 4G Lte / 3G
Enter the APN information (optional). Pin Code: Enter the PIN associated with your SIM card. Select Auto or Manual to determine whether the router Reconnect Mode: should reconnect to your 3G / 4G network automatically or manually. D-Link DWR-925 User Manual... - Page 24 ISP. If you select Use Ping, set the ping interval and the IP address to ping. Bridge Ethernet Ports: Activate this feature to use the Ethernet WAN port as an additional LAN port. NAT disable: Activate this feature to disable NAT through this router. D-Link DWR-925 User Manual...
-
Page 25: Gre Settings
Set the time to live for the GRE tunnel. Subnet: Enter the subnet address. Enable: Tick this box to enable the individual GRE tunneling rule. Default Gateway: Choose a gateway from the drop-down menu (if any). Refresh: Update the information on current GRE tunnels. D-Link DWR-925 User Manual... -
Page 26: Wireless Settings
Note: While using the wizard, you can click Prev to go back to the previous page or you can click Cancel to close the wizard. Enter a name (SSID) for your wireless network, then click Next to continue. Select a level of wireless security to use, then click Next to continue. D-Link DWR-925 User Manual... - Page 27 (0-9, A-F). If you choose ASCII, the password must be 5 or 13 alphanumeric characters. Click Next to continue. This completes the Wireless Connection Setup Wizard. Click Save to save your changes and reboot the router. D-Link DWR-925 User Manual...
-
Page 28: Add Wireless Device With Wps
WPS Status: Indicates whether WPS is In. Use or Not. In. Use. The Trigger button will activate WPS for up to 120 seconds. D-Link DWR-925 User Manual... -
Page 29: Manual Wireless Connection Setup
This setting determines whether the SSID will be Visible.or Invisible.to wireless clients looking for wireless networks. Setting this to Invisible.can increase the security of your network by making it undetectable, but clients will need to manually enter the SSID of your network to connect. D-Link DWR-925 User Manual... - Page 30 •. WPA-Personal:.WPA-PSK encryption will be used. This setting is recommended for most users. •. WPA-Enterprise:. WPA-EAP encryption will be used. This setting is only recommended if you have a RADIUS authentication server. Otherwise, WPA-Personal should be used. D-Link DWR-925 User Manual...
- Page 31 HEX or ASCII key, you will need to enter different numbers of characters for your key, as indicated below the WEP Key text box. ASCII keys may use letters and numbers only, and HEX keys may use numbers 0-9 and letters A-F only. D-Link DWR-925 User Manual...
- Page 32 Network Key: Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers. D-Link DWR-925 User Manual...
- Page 33 RADIUS Server IP Enter the IP address of your RADIUS server. Address: RADIUS Server Port: Enter the port used for your RADIUS server. RADIUS Server Shared Enter the shared secret/password for your RADIUS server. Secret: D-Link DWR-925 User Manual...
-
Page 34: Network Settings
IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask. The default subnet mask is 255.255.255.0. Local Domain Enter the local domain name for your network. Name: D-Link DWR-925 User Manual... -
Page 35: Dhcp Server Settings
DHCP Server Settings The DWR-925 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that request them. By default, the DHCP server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically assigned to the clients on the network. -
Page 36: Ipv6 Setup
IPv6 Internet Service Provider (ISP). Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. D-Link DWR-925 User Manual... -
Page 37: Static Ipv6
Router Advertisement Enter the IPv6 Address Lifetime (in seconds). Lifetime: DS-Lite Enable: Tick to enable DS-Lite. Tick Manual.Configuration.to configure this setting. DS-Lite Configuration: AFTR IPv6 Address: Enter the AFTR IPv6 address supplied by your service provider. D-Link DWR-925 User Manual... -
Page 38: Lan Ipv6 Address Settings
Autoconfiguration Type: Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: DS-Lite Enable: Tick to enable DS-Lite. Tick DS-Lite.DHCPv6.Option or Manual.Configuration. DS-Lite Configuration: AFTR IPv6 Address: Enter the AFTR IPv6 address supplied by your service provider. D-Link DWR-925 User Manual... -
Page 39: Pppoe
LAN IPv6 Link-Local Displays the LAN IPv6 Link-local address. Address: Enable Tick to enable the autoconfiguration feature. Autoconfiguration: Select SLAAC + Stateless.DHCPv6 or Stateful.(DHCPv6). Autoconfiguration Type: Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DWR-925 User Manual... -
Page 40: Lan Ipv6 Link-Local Address
LAN IPv6 Link-Local Displays the LAN IPv6 link-local address. Address: Enable Tick to enable the autoconfiguration feature. Autoconfiguration: Select SLAAC + Stateless.DHCPv6 or Stateful.(DHCPv6). Autoconfiguration Type: Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DWR-925 User Manual... -
Page 41: To 4
LAN IPv6 Link-Local Displays the router’s LAN link-local address. Address: Enable Tick to enable the autoconfiguration feature. Autoconfiguration: Autoconfiguration Select Stateful.(DHCPv6) or SLAAC+Stateless. Type: DHCPv6 autoconfiguration. Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DWR-925 User Manual... -
Page 42: 6Rd
LAN IPv6 Link-Local Displays the router’s LAN link-local address. Address: Enable Tick to enable the autoconfiguration feature. Autoconfiguration: Select Stateful.(DHCPv6) or SLAAC+Stateless. Autoconfiguration Type: DHCPv6 autoconfiguration. Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: D-Link DWR-925 User Manual... -
Page 43: Autoconfiguration
Section 3 - Configuration Autoconfiguration IPv6: Tick to Enable IPv6 tunneling. IPv6 Connection: Select Autoconfiguration.Type from the drop-down menu. LAN IPv6 Link-Local Displays the router’s LAN link-local address. Address: D-Link DWR-925 User Manual... -
Page 44: Message Service
This page enables or disables remote management via SMS as well as sets the phones that will receive notifications. Click the Save.Settings.to update your settings. Remote Management Enable or disable remote management via SMS. via SMS: Access Control List: Enter phone numbers to receive messages and tick the checkbox next to Notification to enable this feature. D-Link DWR-925 User Manual... -
Page 45: Vpn Settings
VPN Setup Wizard The DWR-925 allows you to set up VPN using the automated VPN.Setup.Wizard or using Manual.VPN.Setup. VPN settings are used to create virtual private tunnels to remote VPN gateways. The tunnel technology supports data confidentiality, data origin authentication, and data integrity of network information by utilizing encapsulation protocols, encryption algorithms, and hashing algorithms. - Page 46 Set the type of encryption and authentication of your IPSec proposal settings and click Next. When setup is completed the name and security details will be displayed and the router will reboot. Click Save to finish. D-Link DWR-925 User Manual...
-
Page 47: Manual Vpn Setup
XAUTH.account: select it to store XAUTH account information such as user name and password. PPTP.Client / PPTP.Server: DWR-925 can act as either client or server under PPTP, click it to configure this setting. L2TP.Client / L2TP.Server: DWR-925 can act as either client or server under L2TP, click it to configure this setting. -
Page 48: Vpn Dynamic Ip
Then enter the user name and password if required by the remote VPN server endpoint configured in xAuth Server Mode. Set IKE Proposal: Tick this box to enable IKE Proposal. Set IPSEC Proposal: Tick this box to enable IPSec Proposal. D-Link DWR-925 User Manual... - Page 49 Use this area to Enable IKE Proposals. Then determine the Encryption and Authentication types, as well as the DH.Group from the drop-down menus. IPSEC Proposal Settings: Use this area to Enable IPSec Proposals. Then determine the Encryption and Authentication types from the drop-down menus. D-Link DWR-925 User Manual...
-
Page 50: Advanced
Tick the box to enable the specified rule. Schedule Rule #: Specify the schedule rule number. To create schedules, click on the Add.New.Rule button. For further information on schedules, please refer to “Schedules” on page 67. D-Link DWR-925 User Manual... -
Page 51: Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications may have difficulty working through NAT (Network Address Translation). Application Rules allow some of these applications to work with the DWR-925 by opening ports after detecting traffic being sent through a trigger port. After modifying any settings, click Save.Settings to save your changes. -
Page 52: Qos Engine
Tick the box to enable the specified rule. Use Rule #: Specify the schedule rule number. To create a new schedule, click on the Add.New.Rule button. For more information about schedules, please refer to “Schedules” on page 67. D-Link DWR-925 User Manual... -
Page 53: Mac Address Filter
If this box is ticked, the rule will follow the connection control setting specified in MAC filtering settings specified above. If this box is ticked, the rule will follow the association control setting specified in MAC filtering settings specified above. Click Next.page to see more filters. D-Link DWR-925 User Manual... -
Page 54: Url Filter
Tick the box to enable URL filtering. URL FILTERING RULES This identifies the rule. URL: Enter URL that you would like to block. All URLs that begin with this URL will be blocked. Enable: Tick the box to enable the specified rule. D-Link DWR-925 User Manual... -
Page 55: Outbound Filter
Schedule Rule #: Specify the schedule rule number. Click on the Add.New.Rule button to create a new schedule rule. Previous Page: Go back to the previous filter page. Next Page: Advance to the next filter page. D-Link DWR-925 User Manual... -
Page 56: Inbound Filter
Schedule Rule #: Specify the schedule rule number. Click on the Add.New.Rule button to create a new schedule rule. Previous Page: Go back to the previous filter page. Next Page: Advance to the next filter page. D-Link DWR-925 User Manual... -
Page 57: Snmp
SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWR-925. The DWR-925 supports SNMP v1 and v2c. -
Page 58: Routing
The number of hops equals the number of routers or gateways that data must pass through before reaching the destination. Enable: Select this box to enable the rule. D-Link DWR-925 User Manual... -
Page 59: Advanced Wireless
TX Rates: Select the basic transfer rates based on the speed of wireless adapters on your wireless network. It is strongly recommended to keep this setting to Auto. D-Link DWR-925 User Manual... - Page 60 Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40 MHz and there is another wireless network’s channel over-lapping and causing interference, the router will automatically change to 20 MHz. D-Link DWR-925 User Manual...
-
Page 61: Advanced Network
UPnP provides compatibility with various networking equipment, software, and peripherals. Enable WAN Ping Select the box to allow the WAN port to be “pinged. ” Blocking Respond: WAN pings may provide some extra security from hackers. D-Link DWR-925 User Manual... -
Page 62: Dmz
Tick this box to enable a DMZ area that allows a specific computer unrestricted access. This option is not recommended and should be used with caution. DMZ IP Address: Specify an IP address for the DMZ zone and select the computer to associate it with. D-Link DWR-925 User Manual... -
Page 63: Tools
Enable Remote Tick this check box to enable remote management. Remote Management: management allows the DWR-925 to be configured over the Internet through a web browser. A username and password will still be required to access the web-management interface. IP Allowed to Access: Enter the Internet IP address of the PC that has access to the broadband router. -
Page 64: Time
NTP Server Used: Enter an NTP server to use for time synchronization, or use the drop-down box to select one. Click the Update.Now button to synchronize the time with the NTP server. D-Link DWR-925 User Manual... -
Page 65: Syslog
Section 3 - Configuration Syslog The DWR-925 keeps a running log of events and activities occurring on the router. You may send these logs to a Syslog server on your network. After modifying any settings, click Save.Settings to save your changes. -
Page 66: Email Settings
Enter the email address where you would like the router to send emails to. Email Subject: Enter a subject for the email. Email Log Now: Click this button to send the current logs to the specified email address. D-Link DWR-925 User Manual... -
Page 67: System
Upload.Settings button to upload the settings to the router. Restore To Factory This option will restore all settings back to their defaults. Any Default Settings: settings that have not been backed up will be lost, including any rules that you have created. D-Link DWR-925 User Manual... -
Page 68: Firmware
Here, you can upgrade the firmware of your router. Make sure the firmware you want to use is on the local hard drive of the computer and then click Browse to upload the file. You can check for and download firmware updates at the D-Link support site at http://support.dlink.com. -
Page 69: Dynamic Dns
The DDNS feature allows you to host a server (Web, FTP, or Game Server) using a domain name that you have purchased (such as www.exampledomain.com) with your dynamically assigned IP address. You can use one of the listed DDNS service, or you can sign up for D-Link’s free DDNS service at www.dlinkddns.com. -
Page 70: System Check
Host Name or IP Enter a host name or the IP address that you want to ping and Address: click the Ping.button. The results of the ping attempt will be displayed in the PING RESULT section below. D-Link DWR-925 User Manual... -
Page 71: Schedules
Select a day of the week for the start time and end time. Start Time (hh:mm): Enter the time at which you would like the schedule to become active. End Time (hh:mm): Select the time at which you would like the schedule to become inactive. D-Link DWR-925 User Manual... -
Page 72: Status
Displays the WAN connection details of the router. LAN: Displays the LAN connection details of the router. Wireless LAN: Displays the wireless LAN connection details of the router LAN Computers: Displays the list of clients connected to the router. D-Link DWR-925 User Manual... -
Page 73: Log
Click this button to download the current system log to your computer. Clear Logs: Click this button to clear the system log. Link To Log Settings: Click this button for a link that goes to the Log Settings page. D-Link DWR-925 User Manual... -
Page 74: Statistics
Here you can view the packets transmitted and received by your router for both the WAN and LAN ports. The traffic counter will reset if the device is rebooted. Click the Refresh button to refresh the WAN statistics. D-Link DWR-925 User Manual... -
Page 75: Wireless
Section 3 - Configuration Wireless This table displays a list of wireless clients that are connected to your wireless router. Click Refresh to refresh the list. D-Link DWR-925 User Manual... -
Page 76: Ipv6 Status
Section 3 - Configuration IPv6 Status This page displays the IPv6 network connection details. Click Refresh to refresh the list. D-Link DWR-925 User Manual... -
Page 77: Support
Section 3 - Configuration Support This screen gives you more information about the various parts of the configuration interface. Click on a link to learn more about that topic. D-Link DWR-925 User Manual... -
Page 78: Connecting.a.wireless.client
Step.2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step.3 - Allow up to 2 minutes to configure. Once the Power/Status LED stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DWR-925 User Manual... -
Page 79: Windows® 8
To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-925 User Manual... - Page 80 WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected.will appear next to the name of the network to which you are connected. D-Link DWR-925 User Manual...
-
Page 81: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DWR-925 User Manual... - Page 82 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-925 User Manual...
- Page 83 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-925 User Manual...
-
Page 84: Wps
Section 4 - Connecting to a Wireless Network The WPS feature of the DWR-925 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. - Page 85 Section 4 - Connecting to a Wireless Network 3. Double-click your D-Link router. 4. Input the WPS PIN number (displayed in the WPS window on the router’s LCD screen or in the Setup.> Wireless.Setup menu in the router’s Web UI) and click Next.
- Page 86 Section 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DWR-925 User Manual...
- Page 87 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DWR-925 User Manual...
-
Page 88: Windows Vista
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking.Basics section in this manual for more information. D-Link DWR-925 User Manual... -
Page 89: Wpa/Wpa2
1..Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect.to.a.network. 2..Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-925 User Manual... - Page 90 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-925 User Manual...
-
Page 91: Windows® Xp
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking.Basics section in this manual for more information. D-Link DWR-925 User Manual... -
Page 92: Wpa/Wpa2
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View.Available.Wireless.Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-925 User Manual... - Page 93 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DWR-925 User Manual...
-
Page 94: Troubleshooting
1..Why.can’t.I.access.the.web-based.configuration.utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. - Page 95 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
- Page 96 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter.(or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: . ping.[url].[-f].[-l].[MTU.value] Example: ping.yahoo.com.-f.-l.1472 D-Link DWR-925 User Manual...
- Page 97 • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual.Configure. D-Link DWR-925 User Manual...
-
Page 98: Wireless.basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. -
Page 99: What Is Wireless
Why.D-Link.Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How.does.wireless.work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. - Page 100 Who.uses.wireless?. Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...
-
Page 101: Tips
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers. -
Page 102: Wireless Modes
•. Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DWR-925 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. -
Page 103: Networking.basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 104: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step.5 Click OK twice to save your settings. D-Link DWR-925 User Manual... -
Page 105: Technical.specifications
• 185 x 114.5 x 25.4 mm (7.28 x 4.51 x 1.00 inches) • Network Address Translation (NAT) • Stateful Packet Inspection (SPI) Operating.Temperature • 0 to 50 °C (32 to 122 °F) • L2TP/PPTP/IPSEC/GRE VPN Storage.Temperature • -10 to 70 °C (14 to 158 °F) D-Link DWR-925 User Manual... - Page 106 Appendix C - Technical Specifications Operating.Humidity • 10% to 90% (Non-condensing) Storage.Humidity • 0 to 95% non-condensing Certifications • FCC • RoHS • Wi-Fi Certified D-Link DWR-925 User Manual...