Table of Contents
Advertisement
When connecting a video deck
Connect the video deck to the TV using
a video cord (not supplied). However, do
not connect this unit to the TV through
the video deck. Otherwise, you may
experience video leakage when watching
video images from this system. Connect
this unit directly to the TV as shown
below.
TV
Video deck
Do not connect
directly
Tip
For higher quality video images:
Use the optional component video cords to
connect the COMPONENT VIDEO input
jacks on your TV to the COMPONENT
VIDEO OUT jacks of this unit. If your TV is
compatible with progressive format signals,
use this connection and set "PROGRESSIVE
(COMPONENT OUT)" to "ON" (page 28).
You can use an optional S Video cord to
connect the S VIDEO input jack on your TV
to the S VIDEO OUT jack of this unit.
Changing the color system
(Except for Russian and Latin American
models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The default setting for color system is
different depending on the area.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC PAL
1
Press /
Unit
2
Press FUNCTION +/
to select "DVD" (or press DVD
the unit).
3
Press /
4
Press DISPLAY
"SONY DEMO" appears in the display.
5
Press /
holding down
The system turns on automatically and
the color system is changed.
"COLOR NTSC" or "COLOR PAL"
appears in the display.
to turn on the system.
repeatedly
to turn off the system.
repeatedly until
on the unit while
on the unit.
Continued
on
7
GB
Hide quick links:
Advertisement
Table of Contents
