Page 1
XC-P01 -S/-K CD RECEIVER SYSTEM XC-P01DAB -S/-K http://www.pioneer.co.uk Discover the benefits of registering your product online at (or http://www.pioneer.eu). Operating Instructions...
Page 2
A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002*_A1_En...
Page 3
Condensation Information for users on collection and disposal of old equipment and used batteries If the player is moved suddenly from a cold place into a warm room (in winter, for example) or if the Symbol for These symbols on the products, packaging, and/or accompanying documents mean temperature in the room in which the player is installed equipment that used electrical and electronic products and batteries should not be mixed with...
Thank you for purchasing this PIONEER product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your PIONEER product. XC-P01/XC-P01DAB CD Receiver System consists of a stereo Contents Timer and sleep operation ....25 Setting the wake-up timer.
It can also reduce the life or performance of • Use the unit on a firm, level surface free from vibration. PIONEER will not be held responsible for any damage batteries. • Keep the unit away from direct sunlight, strong magnetic...
Controls Controls Remote control There are functions which can be operated only when the remote control is set in either of the stereo receiver control mode or CD player control mode, and functions which can be operated regardless of the mode of the remote control. 12 BASS +/–...
Page 7
Controls 9 Tuner control buttons Buttons available for the stereo receiver control BAND − XC-P01:Switches between FM ST (stereo) and FM mode MONO radio bands (pages 21, 22). The following functions are available only when the remote XC-P01DAB: Switches between FM ST (stereo) and FM control is in the stereo receiver control mode.
Page 8
Controls Buttons available for the CD player control mode Test of the remote control The following functions are available only when the remote Check the remote control after checking all the connections. control is in the CD player control mode. Point the remote control directly at the remote sensor on the stereo receiver.
Controls CD player Front panel Stereo receiver 1 /I STANDBY/ON Press to turn on and off the CD player (page 13). 2 Disc tray Place a disc, label side up (page 15). 1 /I STANDBY/ON Press to turn on and off the stereo receiver (page 13). Use to open or close the disc tray (page 15).
Left speaker XC-P01 AC IN Monaural mini-plug cord (without resistor) To CONTROL OUT ANTENNA socket of other Pioneer component FM aerial Wall socket XC-P01DAB: Connect the DAB/FM (AC 220 V to 230 V, 50 Hz) aerial to the DAB/FM socket.
Page 11
Controlling the unit using a remote control of other Pioneer component This unit can be controlled using a remote control of other Pioneer component if the stereo receiver is connected to the ANTENNA component with a monaural mini-plug cord (commercially available).
Connect the stereo receiver and CD player using the supplied once in a while. When you find it damaged, ask your DIGITAL IN remote control cable and RCA audio cable. nearest PIONEER authorized service centre or your dealer COAXIAL for a replacement. Stereo receiver (XC-P01 for example) AV receiver, D/A converter, etc.
General control General control 4 Press ENTER button. 5 Use / to set the day, then press ENTER. General functions 6 Use / to select 24-hour or 12-hour display, then press ENTER. To turn the power on The time is displayed in the 24-hour Press the ...
Page 14
General control Note Muting Auto power down setup • If pressing the INPUT button on the remote control The volume is muted temporarily when pressing the MUTE The unit turns off automatically if no operations are repeatedly or turning the SOURCE knob on the stereo button on the remote control.
Listening to a CD or MP3/WMA disc • Some audio CD-R and CD-RW discs may not be playable Listening to a CD or MP3/ CAUTION due to the state of the disc or the device that was used for • Do not place two discs in one disc tray. recording.
Listening to a CD or MP3/WMA disc B. For example, to choose 130 Various disc functions Advanced CD or MP3/WMA disc playback 1 Press the “+100” button. 2 Press the “+10” button three times. On CD Remote Function Operation player control 3 Press the “0”...
Listening to a CD or MP3/WMA disc 4 Press the ENTER button to save the track number. Shuffle play MP3/WMA folder mode (only for MP3/WMA 5 Repeat steps 3 and 4 for other tracks. The tracks on the disc can be played in shuffle order Up to 32 tracks can be programmed.
Page 18
Listening to a CD or MP3/WMA disc *The song title, artist name, and the album name will only be About folder playback order MP3/WMA disc playback in the folder mode displayed during playback. If MP3/WMA files are recorded in several folders, a folder To cancel the folder playback mode, stop the playback, press 1 Press the CONTROL CD button on the remote control.
Press in the playback • Installing software versions other than indicated on the or stop/pause mode. website of Pioneer to your iPod/iPhone/iPad mini may If you press the button result in incompatibility with this system. Track up/ in the stop/pause •...
Release the button to storage device/MP3 Important reverse resume playback. • Pioneer cannot guarantee compatibility (operation and/or − Press to repeat the player REPEAT bus power) with all USB mass storage devices and REPEAT playback of files.
Listening to the FM radio Automatic tuning Listening to the FM radio Note To search for stations in the currently selected band, • If the stereo receiver is left disconnected from the AC press and hold TUNE / for about a second. The stereo power outlet for over a month, the station memories will receiver will start searching for a station, and stop when be lost and will have to be reprogrammed.
Using the Radio Data System (RDS) Using the Radio Data Displaying RDS information Use the RDS DISP or DISPLAY button to display the different System (RDS) types of RDS information available. 1 Press the CONTROL RCV button on the remote control. 2 Press the RDS DISP or DISPLAY button for RDS Introduction to RDS information.
Listening to the DAB (XC-P01DAB only) Listening to the DAB Using the auto scan function manually Selecting DAB (XC-P01DAB only) Using DAB for the very first time The very first time you use DAB, press the AUTO TUNE button to run the Auto Scan. DAB (Digital Audio Broadcasting) is a digital transmission If a new DAB station is introduced, or you move to a new area, system where audio signals are converted to digital signals...
Page 24
Listening to the DAB (XC-P01DAB only) Multiplex Name Displaying DAB radio information Displays the name of the current multiplex. 1 Select DAB. Selecting DAB on page 23 for more on this. BBC Station 2 Press the CONTROL RCV button on the remote control. 3 Press the RDS DISP or DISPLAY button repeatedly to Bitrate display information about the selected DAB station.
Timer and sleep operation Timer and sleep operation 5 Select the source you want to play. 5 When ‘Timer On’ is selected, turn off the stereo receiver. Use / button to select CD, DAB (XC-P01DAB only), Refer to on page 13 for details. To turn the power on TUNER PRESET, NETWORK, DIGITAL IN 1, or DIGITAL IN 2.
If something is wrong with this product, check the following Are the stereo receiver and CD player connected correctly accessory is not supported by iPhone” appears on iPhone before calling your authorized PIONEER dealer or service with the supplied remote control cable and RCA audio cable? screen.
Additional information • Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark Factory reset, clearing all memory this surface. CAUTION • Keep your discs away from direct sunlight, heat, and •...
Specifications This CD player supports the following music file formats. As part of our policy of continuous improvement, PIONEER reserves the right to make design and specification changes • Note that some file formats are not available for playback although they are listed as playable file formats. Also, the for product improvement without prior notice.