Page 1
MODIFICATION HISTORY MODEL NAME : KLV-S19A10/S23A10 SERVICE MANUAL PARTS No. : 9-878-329-02 * Blue characters are linking. Ver. DATA CONTENTS 2005. 3 New 2005. 4 Addition of WARNING AND CAUTIONS Section1. SELF-DIAGNOSIS FUNCTION Changed. Description of LED indicators. 1-1) Changed. LED control.
Page 3
4 × 10 cm (15 × 39 Full range: inches) (2) KLV-S19A10: (with stand) 9.9 kg (21 lb. 14 oz.) (without stand) 6.3 kg (13 lb. 15 oz.) Speaker output: KLV-S23A10: (with stand) 12.3 kg (27 lb. 2 oz.) 5 W + 5 W (without stand) 8.7 kg (19 lb.
Page 4
WARNINGS AND CAUTIONS KLV-S19A10/S23A10 (UC)
Page 5
2. Check the interboard wiring to ensure that no wires are OPERATION. REPLACE THESE COMPONENTS WITH “pinched” or contact high-wattage resistors. SONY PARTS WHOSE PART NUMBERS APPEAR AS 3. Check that all control knobs, shields, covers, ground straps, SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- and mounting hardware have been replaced.
When OFF TIMER is set with black screen. ON Timer Lights red When ON TIMER is set during power-off. Lights green Lights red When ON TIMER is set during power-on. Lights green Lights red Lights green When ON TIMER is set with black screen. KLV-S19A10/S23A10 (UC)
3 times Abnormal panel/HFE voltage (DCALERT 1) 4 times Backlight failure 5 times Abnormal main power voltage 6 times Abnormal speaker voltage 7 times Internal temperature rise (mainly on the panel side) 8 times Trident IC failure KLV-S19A10/S23A10 (UC) 1-2E...
2-1-4. VESA BRACKET, SIDE BRACKET ASSY AND S1 SHEILD TOP REMOVAL 4 Two screws (+BVTT 3X6) 5 Side bracket assy (U) 2 Four screws 1 Two screws (+BVTP 4X12) (+B M4X6) 7 S1 top shield (UL) 3 VESA bracket (19) 6 Five screws (+BVTT 3X6) Connector assy KLV-S19A10/S23A10 (UC)
(+BVTT 3X6) 1 One screws 4 Two screws (+BVTT 3X6) (+PSW 4X12) 2 Plate bridge assy 7 One screw 5 ARM L (23) (+PSW 4X12) 8 ARM R (23) 3 One screw 6 One screw (+B M4X6) (+B M4X6) KLV-S19A10/S23A10 (UC)
2 A2U board KLV-S23A10 2-2-8. P AND TU BOARDS REMOVAL 4 Two screws 6 Connection cord (+BVTT 3X6) 5 TU board 1 One screw (+BVTT 3X6) 3 P board 2 One screw (+B 3X4 WITH SCOTCHGRIP ) KLV-S19A10/S23A10 (UC) 2-10...
(2) Press the buttons on the remote control as follows. DISPLAY → TEN KEY “5” → VOL “+” → TV POWER Analog service menu 3-2. ADJUSTMENT USING THE SERVICE MENU. Set adjustment values using the” ” keys and the “ ” key. KLV-S19A10/S23A10 (UC) 3-1E...
TO 2/2 CN9300 CN7503 CN9851 HP L HP_L D3_IN_CB HP R HP_R J9852 TO 2/2 D3_IN_CR HP DET HP_DET RESET SCLK SCL_B_5V A2U(1/2) SDAT SDA_B_5V D3_IN_R D3_IN_L P BOARD (TUNER,VIDEO SW) CN5002 SUB11V SUB11V INPUT (KLV-S23A10 ONLY) TERMINAL KLV-S19A10/S23A10 (UC)
4-2. FRAME DIAGRAMS 4-2-1. KLV-S19A10 VIDEO 2 CN9801 CN9901 AUDIO AUDIO S VIDEO VIDEO SPEAKER AUDIO J9006 J9002 J9852 J9004 J9011 S VIDEO CN7750 CN1006 CN1008 CN1007 CN9000 CN9001 VIDEO 3 IN VIDEO (MONO) AUDIO REG17.5 REG17.5 CN9405 CN1003 S VIDEO...
4-3. CIRCUIT BOARDS LOCATION 4-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-3-1. KLV-S19A10 Note: Terminal name of semiconductors in silk screen • All capacitors are in µF unless otherwise noted. (pF: µµF) printed circuit ( Capacitors without voltage indication are all 50 V.
Page 50
Side Side IC5202 IC5203 D5000 IC5301 D5001 D5003 D5006 TRANSISTOR D5007 D5100 Component Conductor Side Side D5101 Q5000 D5102 Q5001 Q5002 Q5200 : Refer to Terminal name of semiconductors in silk screen printed circuit (see page 4-10) KLV-S19A10/S23A10 (UC) 4-29...
• Items marked " * " are not stocked since they are seldom required for routine service. Some delay Les composants identifiés par la marque ! should be anticipated when ordering these items. sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. KLV-S19A10/S23A10 (UC)
4-635-966-01 SCREW (HEX) * A-1096-626-A TU MOUNT 2-588-756-01 SCREW +B 3X4 WITH SCOTCHGRIP 1-827-467-41 CORD, CONNECTION * A-1052-776-A P MOUNT 3-682-691-00 NUT, WASHER HEXAGON * A-1107-289-A B MOUNT (NVM) 1-910-012-88 CONNECTOR ASSY 50P 7-685-871-01 SCREW +BVTT 3X6 (S) KLV-S19A10/S23A10 (UC)
REF. No. PART No. DESCRIPTIONRE MARK REF. No. PART No. DESCRIPTIONRE MARK X-2050-882-1 HOLDER SIDE JACK ASSY 7-685-871-01 SCREW +BVTT 3X6 (S) * A-1096-628-A H2 MOUNT * A-1085-893-A G1 MOUNT 4-056-942-01 SPACER, MINIATURE CARD * A-1096-627-A A2U MOUNT KLV-S19A10/S23A10 (UC) 5-10...
Les composants identifiés par la marque ! • F : nonflammable sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. When indicating parts by reference number, please include the board name. KLV-S19A10/S23A10 (UC)