The Setup Tab - Mac Address Clone; Figure 5-11: Setup Tab - Mac Address Clone - Linksys WRT350N User Manual

2.4ghz wireless-n gigabit router with storage link

Hide thumbs Also See for WRT350N:

Table of Contents

Wireless-N Gigabit Router with Storage Link

The Setup Tab - MAC Address Clone

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like a social security

number. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish

to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with

your ISP to the Router with the MAC Address Clone feature.

MAC Address Clone

To use MAC address cloning, select Enabled. Otherwise, keep the default, Disabled.

MAC Address. Enter the MAC Address registered with your ISP.

Clone My PC's MAC. If you want to clone the MAC address of the PC you are currently using to configure the

Router, then click this button. The Router will automatically detect your PC's MAC address, so you do NOT have to

call your ISP to change the registered MAC address to the Router's MAC address. It is recommended that the PC

registered with the ISP is used to open the MAC Address Clone screen.

When you have finished making changes to this screen, click the Save Settings button to save the changes, or

click the Cancel Changes button to undo your changes. Help information is available on the right side of the

screen.

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link

The Setup Tab - MAC Address Clone

mac address: the unique address that a

manufacturer assigns to each networking device.

Table of Contents

Show Quick Links

Table of Contents