hit counter script
Linksys SFE2010 Admin Manual
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Network Router
  5. SFE2010
  6. Admin manual

Linksys SFE2010 Admin Manual

48-port 10/100 ethernet switch business series
Hide thumbs
Table of Contents

Advertisement

Quick Links

ADMIN GUIDE
BUSINESS SERIES
48-port 10/100 Ethernet Switch
SFE2010/SFE2010P
Model:

Advertisement

Table of Contents
loading

Related Manuals for Linksys SFE2010

Summary of Contents for Linksys SFE2010

  • Page 1 ADMIN GUIDE BUSINESS SERIES 48-port 10/100 Ethernet Switch SFE2010/SFE2010P Model:...

  • Page 2: Table Of Contents

    Introduction ......1 Welcome What’s in this User Guide? Getting to Know the SFE2010/SFE2010P ....2 SFE2010/P Front Panel SFE2010/P Back Panel Connecting Devices .
  • Page 3 Industry Canada Statement EC Declaration of Conformity (Europe) Specifications ......60 SFE2010/SFE2010P Administration Guide Table of Contents...

  • Page 4: Introduction

    Introduction Welcome Thank you for choosing a Linksys Switch. This Switch will allow you to quickly and economically expand your Linksys system. This new Linksys rack mount Switch delivers non-blocking, wire speed switching for your network clients, plus multiple options for connecting to your network backbone. Forty eight ports wire up your workstations or connect to other Linksys switches or devices.

  • Page 5: Getting To Know The Sfe2010/Sfe2010P

    (Activity) LEDs flash to indicate that the Switch is actively sending or receiving data over that port. Speed On the SFE2010, a green Speed LED indicates that the port is linked to a 100Mbps device. On the SFE2010P, a green PoE LED indicates that PoE is active on that port.
  • Page 6 1000Mbps. Use the Linksys MGBT1, MGBSX1, or MGBLH1 mini-GBIC modules with the Switch. The MGBSX1 and the MGBLH1 require fiber cabling with LC connectors, while the MGBT1 requires a Category 5e Ethernet cable with an RJ-45 connector.

  • Page 7: Sfe2010/P Back Panel

    The Console port is where you can connect a serial cable to a PC’s serial port for configuration using your PC’s HyperTerminal program. Refer to Chapter 4: Using the Console Interface for Configuration for more information. Redundant Power Supply (Linksys RPS1000) SFE2010/SFE2010P Administration Guide Getting to Know the SFE2010/SFE2010P...

  • Page 8: Connecting Devices

    Connecting Devices This chapter explains how to physically connect your network devices to the switch. • ”Sample Network Configuration, ” on page 5 • ”Maximum Cabling Distances, ” on page 5 • ”Before You Install the Switch... , ” on page 6 •...

  • Page 9: Before You Install The Switch

    (50 mm). • Connect the supplied power cord to the switch’s power port, and plug the other end into an electrical outlet. CAUTION: Make sure you use the power cord that is supplied with the switch. Use of a different power cord could damage the switch.

  • Page 10: Rack-Mount Placement

    1. Remove the four front screws on one side of the Ethernet switch. Retain the screws for re- installation. 2. Place one of the supplied spacers on the side of the Ethernet switch so the four holes align to the screw holes.

  • Page 11: Wall-Mount Placement

    NOTE: The Ethernet switch, shown below, is mounted with the ports located on top. When the switch is mounted to a wall, the ports can be oriented in any direction. 2. Place one of the supplied spacers on the side of the Ethernet switch so the four holes align to the screw holes.
  • Page 12 5. If you use the console interface to configure the Ethernet switch, then connect the supplied serial cable to the console port (located on the back of the Ethernet switch), and tighten the captive retaining screws. Connect the other end to your PC’s serial port. (The PC must be running VT100 terminal emulation software, such as HyperTerminal.)

  • Page 13: Web Utility Configuration

    Web Utility Configuration This chapter provides an introduction to the features of the web-based configuration utility. Linksys switch provides a complete web-based utility to configure the switch. This utility is accessed through your web browser. • ”Connecting to the Switch with the Web-Based Utility , ” on page 10 •...

  • Page 14: Viewing On-Line Help

    Viewing On-line Help Viewing On-line Help The Web Utility has on-line Help including field definitions for each screen. To access the on- line help for a particular screen, click the Help button on the right side of the screen. SFE2010/SFE2010P Administration Guide...

  • Page 15: Using The Console

    You can use the HyperTerminal to connect to your switch. NOTE: The switch also can be configured through a telnet connection. Telnet to the switch IP address 192.168.1.254. Then, press the Enter key. The default logon ID is admin with a blank password.
  • Page 16 OK. 3. On the Connect To screen, use the Connect using drop-down list to select a port to communicate with the switch: COMn, or TCP/ IP. SFE2010/SFE2010P Administration Guide Using the Console Connecting to Your Switch with HyperTerminal...
  • Page 17 6. Optionally, on the File menu, click Save to save these settings. The next time that you need to connect to the console, you can open this saved connection. SFE2010/SFE2010P Administration Guide Using the Console Connecting to Your Switch with HyperTerminal...

  • Page 18: Connecting To The Switch With Telnet

    Connecting to the Switch with Telnet You can connect to the switch with telnet. 1. Open a command line editor and enter telnet <switch ip address>. Then, press the Enter key. 2. When the Login screen appears, select Edit and enter admin in the User Name field. Leave the Password field blank.

  • Page 19: Using The Switch Main Menu

    Using the Switch Main Menu The Switch Main Menu provides access to screens that you can use to configure your system, view or modify port and PoE settings, and view or modify system and stacking mode. System Configuration (see page 16)

  • Page 20: System Information

    Stack Configuration (see page 47) 0.Back (Select return to the previous menu.) To open this screen: From the Switch Main Menu, select 1. System Configuration Menu. System Information The System Information menu provides access to screens where you can view firmware version information and general system information.
  • Page 21 Versions Use the Versions screen to display the boot, software, and hardware firmware versions of the Ethernet switch. In stacking mode, this information is displayed for the stack master. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration.

  • Page 22: Management Settings

    SSH Configuration (see page 21) 0.Back (Select to return to the previous menu.) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. SFE2010/SFE2010P Administration Guide...
  • Page 23 Using the Console System Configuration Serial Port Configuration Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu.
  • Page 24 To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. 3. From the Management Settings Menu, choose 2. Telnet Configuration. To change the time-out setting: 1.
  • Page 25 SSH server port To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. 3. From the Management Settings Menu, choose 3. SSH Configuration.
  • Page 26 Using the Console System Configuration To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. 3. From the Management Settings Menu, choose 3. SSH Configuration.

  • Page 27: Username & Password Settings

    Use the SSH Keys Fingerprints screen to view the RSA and DSA fingerprints. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration Menu. 2. From the System Configuration Menu, select 2. Management Settings. 3. From the Management Settings Menu, choose 3. SSH Configuration.

  • Page 28: Security Settings

    NOTE: The default user is “admin” with no password. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 3. Username & Password Settings. To change User & Password settings: 1.
  • Page 29 Use the SSL Certificate Generation screen to view, edit, and execute device-generated certificates. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration menu, select 4. Security Settings. 3. From the Security Settings Menu, select 1. SSL Generate Certificate.
  • Page 30 Use the Show Certificate screen to display the internal certificate. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 4. Security Settings. 3. From the Security Settings Menu, select 2. SSL Show Certificate.

  • Page 31: Vlan Management

    Default VLAN Setup (see page 28) 0.Back (Select to return to the previous menu.) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 5. Vlan Management. Default VLAN Setup You can use the Default VLAN Setup screen to view and change the VLAN ID.

  • Page 32: Ip Configuration

    Network Configuration (see page 38) 0.Back (Select to return to the previous menu.) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. SFE2010/SFE2010P Administration Guide...
  • Page 33 0.Back (Select to return to the previous menu.) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 1. IPv4 Address Configuration.
  • Page 34 NOTE: This option is available only if the interface is configured as a DHCP interface, through IPv4 Address Settings. To renew DHCP: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 1. IPv4 Address Configuration.
  • Page 35 IPv6 Default Gateway (see page 36) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
  • Page 36 You can use the IPv6 Address - Configuration screen to edit the IPv6 address settings. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
  • Page 37 The IPv6 Address Table lists the IPv6 addresses that are configured. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
  • Page 38 ISATAP Interface Show You can use the To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
  • Page 39 You can use the IPv6 Default Gateway screen to view or edit information about the IPv6 Default Gateway. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
  • Page 40 HTTP server and configure the port on which the session is enabled. To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 3. HTTP Configuration.
  • Page 41 To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 4. HTTPS Configuration. To change HTTPS settings: 1. Select Edit, and then make your changes.
  • Page 42 You can use the Ping IPv4 screen to ping an IPv4 address. To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 5. Network Configuration.
  • Page 43 You can use the Ping IPv6 screen to ping an IPv6 address. To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration. 3. From the IP Configuration menu, select 5. Network Configuration.
  • Page 44 You can use the TraceRoute IPv4 screen to run a trace route test for an IPv4 address To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration.
  • Page 45 You can use the TraceRoute IPv6 screen to run a trace route test for an IPv6 address. To open the screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 6. IP Configuration.

  • Page 46: File Management

    Active Image (see page 45) 0.Back (Select to return to the previous menu.) To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 7. File Management. Upgrade / Backup IPv4 You can use the Upgrade/Backup IPv4 screen to download files from an IPv4 address.
  • Page 47 You can use the Upgrade/Backup IPv6 screen to download files from an IPv6 address. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration. 2. From the System Configuration Menu, select 7. File Management. 3. From the File Management Menu, select 2. IPv6 Upgrade/Backup.
  • Page 48 Action list. Active Image There are two software images on the Ethernet switch: Image 1 and Image 2. When you copy an image to the switch via TFTP, the inactive image is replaced. When you copy an image to the switch via the console port, the active image is replaced.You can use the Active Image screen to...

  • Page 49: Restore System Default Settings

    NOTE: Restoring default settings from the console or web resets all values except stacking configuration (stacking mode, stacking ports, and auto-numbering settings are not reset). To reset stacking configuration, use the hardware reset button on the front of the Ethernet switch. Reset to Factory Settings You can restore the switch to the factory default settings.

  • Page 50: Stack Configuration

    Stack Configuration You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By default, ID numbers are automatically assigned to each device. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration.

  • Page 51: Port Status

    You can use the Port Status screen to view the port connection status. You can use the up or down arrow keys to scroll through all the ports on the switch. NOTE: To configure ports, use the Port Configuration screen. See ”Port Settings, ”...

  • Page 52: Port Configuration

    You can use the up or down arrow keys to scroll through all the ports on the Ethernet switch. To open this screen: 1. From the Switch Main Menu, press 3. Port Configuration. 2. From the Port Status Menu, press 2. Poe Status. SFE2010/SFE2010P Administration Guide...

  • Page 53: Poe Settings

    You can use the PoE Settings screen to specify the priority and PoE settings for each port. You can use the up or down arrow keys to scroll through all the ports on the Ethernet switch. To open this screen: 1.

  • Page 54: System Mode (Layer 2 / Layer 3) Selection

    System Mode (Layer 2 / Layer 3) Selection You can use the System Mode Selection screen to specify whether the Ethernet switch is operating in Layer 2 or Layer 3 mode. You can also configure stacking mode from this screen.

  • Page 55: Help

    5. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. 6. Reboot the Ethernet switch. Your new settings will take effect after reboot. Help You can use the Help screen to view information about the console menus and options.

  • Page 56: Logout

    Using the Console Logout Logout The Logout command lets you logout from the Ethernet switch. NOTE: When you issue this command, you are immediately logged off the Ethernet switch. SFE2010/SFE2010P Administration Guide...

  • Page 57: Contacts

    • 24-Hour Technical Support: 800-326-7114 • RMA (Return Merchandise Authorization): • Website: http://www.linksys.com • FTP Site: ftp://ftp.linksys.com • Support: http://www.linksys.com/support • Sales Information: 800-546-5797 (800-LINKSYS) EU Contacts • Website: http://www.linksys.com/international • Product Registration: http://www.linksys.com/registration SFE2010/SFE2010P Administration Guide US/Canada Contacts http://www.linksys.com/warranty...

  • Page 58: Customer Site Survey

    If this site is not customer-owned, who is the owner and maintainer of the site? Is this a manned site? Specify the hours of operation (for example, Monday through Friday, 8am to 5pm, Saturday 9 am to 12 Noon). SFE2010/SFE2010P Administration Guide...
  • Page 59 How many users are at your site? Phone number and location of the telephone nearest to the Linksys equipment Access Procedures Specify room access procedures (for example, must visiting personnel be escorted by customer personnel?). Security/Safety Procedures Specify any special security/safety...

  • Page 60: Warranty Information

    Your exclusive remedy and Linksysf entire liability under this limited warranty will be for Linksys, at its option, to (a) repair the product with new or refurbished parts, (b) replace the product with a reasonably available equivalent new or refurbished Linksys product, or (c) refund the purchase price of the product less any rebates.

  • Page 61: Obtaining Warranty Service

    Authorization (RMA) number. You are responsible for properly packaging and shipping your product to Linksys at your cost and risk. You must include the RMA number and a copy of your dated proof of original purchase when returning your product. Products received without a RMA number and dated proof of original purchase will be rejected.

  • Page 62: Federal Communication Commission Interference Statement

    Reglement sur le materiel brouilleur du Canada. EC Declaration of Conformity (Europe) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product meets the requirements of the following standards: • EN55022 Emission • EN55024 Immunity SFE2010/SFE2010P Administration Guide...

  • Page 63: Specifications

    Specifications • SFE2010 48-port 10/100 Ethernet Switch Model • SFE2010P 48-port 10/ 100 Ethernet Switch with PoE • IEEE 802.3af PoE on delivered over any of the 48 10/100 ports • Power budget allows for max power of 15.4W to a FE port, with 360W...
  • Page 64 Secure Socket Layer (SSL) security for Web UI Secure Shell (SSH) RADIUS Port Mirroring TFTP upgrade DHCP Client BootP SNTP Xmodem upgrade Cable Diagnostics PING Syslog Telnet Client (SSH secure support) IEEE 802.1x 802.1x - RADIUS Authentication. MD5 Hash Guest VLAN Single/Multiple Host mode SFE2010/SFE2010P Administration Guide...
  • Page 65 UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/ 23/EEC directives, which include the safety and EMC standards listed below. SFE2010/SFE2010P Administration Guide...
  • Page 66 SFE2010 —4.94kg, or10.89 lbs. (174.25 oz.) SFE2010P — 4.94kg, or10.89 lbs. (174.25 oz.) Power SFE2010 — 100-240V 47-63Hz, Internal, Universal; Also equipped with external redundant power supply connector for external power supply, -48VDC SFE2010P — 100-240V 47-63Hz, Internal, Universal; Also equipped with external...
  • Page 67 080312A-LB...

This manual is also suitable for:

Sfe2010p

Table of Contents