Table of Contents
Advertisement
4. Record the WWN value: Enter wwn, then copy the command output into a file
5. Record the IP address information. Enter ipAddrShow -sw, then copy the
6. Display and record the manufacturer serial numbers. Enter chassisShow, then
7. Create a SAN profile by entering and recording the information provided by
112
SAN768B Installation, Service, and User Guide
named configmiscinfo.txt.
switch:admin> wwn
10:00:00:60:69:00:00:0a
command output into the config-miscinfo.txt file.
switch:admin> ipaddrshow -sw
Ethernet IP Address: 10.32.50.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: 10.32.50.10
Ethernet Subnetmask: 255.55.0.0
HostName : cp0
Gateway Address: 10.32.40.1
CP1
Ethernet IP Address: 10.32.50.11
Ethernet Subnetmask: 255.55.0.0
HostName : cp1
Gateway Address: 10.32.40.1
Backplane IP address of CP0 : 10.0.0.6
Backplane IP address of CP1 : 10.0.0.7
switch:admin>switch:admin>
copy the command output into the config-miscinfo.txt file.
"Factory Serial Num" and "Serial Num" are listed under "Chassis/WWN Unit
1." If the current WWN cards are the original cards, the factory serial number
listed is the same as the chassis serial number. If a "Serial Num" value displays,
contact IBM to determine whether this serial number should be modified after
the new WWN card is installed.
switch:admin> chassisshow
Chassis Backplane Revision: 1F
SW BLADE Slot: 1
Header Version: 2
Power Consume Factor: -50
Factory Part Num: 60-0001532-03
Factory Serial Num: KP000000195
Manufacture: Day: 1 Month: 1 Year: 2007
Update: Day: 14 Month: 3 Year: 2012
Time Alive: 187 days
Time Awake: 3 days
<output truncated>
CHASSIS/WWN Unit: 1 (in same assembly as WWN Unit: 2)
Header Version: 2
Power Consume Factor: -3
Factory Part Num: 60-0001501-07
Factory Serial Num: FT02X805BE2
Manufacture: Day: 26 Month: 3 Year: 2007
Update: Day: 14 Month: 3 Year: 2010
Time Alive: 207 days
Time Awake: 3 days
<output truncated>
switch:admin>
the following commands:
v nsShow
v nsAllShow
v switchShow
v fabricShow
Advertisement
Table of Contents
Troubleshooting
