STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the parts of the Stand Body with
2
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
M4 X 20
3
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
4
the back of the TV.
M4 X 12
Downloaded From TV-Manual.com Manuals
BACK COVER FOR
WIRE ARRANGEMENT
■ Image shown may differ from your TV.
FOR DESK-TYPE STAND
1
2
Stand Body
FOR WALL MOUNT
Stand Base
1
►Do not use the Cable Management Clip
- If the TV is dropped, you may be injured or
Install the Cable Management Clip as
shown.
Connect the cables as necessary. To con-
nect additional equipment, see the External
Equipment Setup section.
After Connecting the cables as necessary,
install Cable Holder as shown and bundle
the cables. To connect additional equip-
ment, see the External Equipment Setup
section.
NOTE
to lift the TV.
the TV may be damaged.
Cable Management Clip
Cable Holder
A-39