Using Explicit Path With Exclude Srlg - Cisco ASR 9000 Series Configuration Manual
Aggregation services router mpls
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring the Shared Risk Link Groups
Weighted-SRLG Auto-backup Path Computation, on page 149
SRLG Limitations, on page 150
Configure the MPLS-TE Shared Risk Link Groups: Example, on page 259
Using Explicit Path With Exclude SRLG
Perform this task to use an explicit path with the exclude SRLG option on the static backup tunnel.
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. interface type interface-path-id
4. backup-path tunnel-te tunnel-number
5. exit
6. exit
7. interface tunnel-tetunnel-id
8. ipv4 unnumbered type interface-path-id
9. path-option preference-priority{ dynamic | explicit {identifier | name explicit-path-name}}
10. destination ip-address
11. exit
12. Use the commit or end command.
13. show run explicit-path name name
14. show mpls traffic-eng topology path destination name explicit-path name
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
mpls traffic-eng
Example:
RP/0/RSP0/CPU0:router(config)# mpls traffic-eng
Step 3
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-mpls-te)#
interface POS 0/6/0/0
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
216
Implementing MPLS Traffic Engineering
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Enables traffic engineering on a specific interface on the
originating node.
OL-28381-02
Advertisement
Table of Contents
