SDP-850
The Samsung SDP-850 provides control of basic operations on the base of the Digital Presenter.
Please note that you can also access these features plus additional advanced functions via the
remote control.
C O N T R O L
Turn on the main
the front of the presenter indicates the unit is "Off." The red light on the remote
control panel window disappears once the unit is turned on.
After the boot-up screen, the presenter will perform an automatic white balance or
"Color Adjustment." Since the SDP-850 has no base, you should always have a white piece of
paper under the lens when the unit is turned on. Printed text on white paper is OK. This will allow
for an accurate auto white balance for the best color accuracy. Press the
time to activate an automatic color adjustment.
Tip:
Make sure there is no colored material under the lens to affect white balance.
The
BRIGHT +/-
buttons are used to lighten or darken the overall image for the desired result.
Tip:
When using the
TXT / IMG
brightness setting for text should fall somewhere near 95 to 100. For images, it will be closer to
40 to 50.
Press the
ZOOM +/-
buttons to reduce or enlarge the image size. When the On Screen display
indicates D-ZOOM, you are working in the Digital Zoom mode (up to 3 times the normal size).
Auto focus will occur after zooming has stopped in all modes.
Tip:
Make sure you're not moving the subject during auto focus. If the subject is blurry, press
the
AF
button to re-focus.
Press the
AF
button to activate the auto focus at any time. Manual focus is available on the base
as well as the remote by pressing the
The
NEGA/POSI
button allows you to switch between the normal, Positive mode setting for most
subjects to a Negative position, best for viewing film negatives.
Quick Start Guide
P A N E L
F U N C T I O N S
POWER
button of the SDP-850. Please note that the Red light on
(Text/Image) feature found on the remote, on average the
FOCUS +/-
buttons for complete focus control.
AWC
button at any
1