66GF-64H SERVICE MANUAL SEJB66GF64H00 Issued: 19th Dec 2000 DA-50W CHASSIS PAL I SYSTEM COLOUR TELEVISION DOLBY SURROUND LOGIC 66GF-64H MODEL DOLBY SURROUND LOGIC In the interests of user safety (required by safety regulations in some countries) the set should restored to its original condition and only parts identical to those specified should be used.
Page 2
OPERATION MANUAL Please read this operation manual carefully before using the colour television. If you require any advice or assistance regarding your Sharp product please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 0990 274277 during office hour.
Page 3
66GF-64H SERVICE MANUAL UPDATE LOG SHEET Technical Report No. Application Cause / Solution Part No. Page No. Data /Serial No. Technical Bulletin No. Use this page to keep any special servicing information as Technical Report (Bulletin), Technical Information, etc. If only part number changes are required, just change part number directly the part number in the Parts Listing Section.
66GF-64H IMPORTANT SERVICING NOTES Only qualified service personnel are allowed to carry out maintenance and repair of this receiver. SERVICING OF HIGH VOLTAGE SYSTEM AND CRT It is important that the static charge is removed from the high voltage system when carrying out work on the receiver.
66GF-64H ADJUSTMENT PROCEDURES All adjustments to this chassis, except for focus, are carried out in the service mode. • • • • • SERVICE MODE The service mode is provided to enable the engineer to correctly set up the receiver to the CRT fitted in the set.
Page 7
66GF-64H Note that the receiver should be set to FULL MODE before carrying out any geometry adjustments. This can be achieved by pressing the widescreen mode button on the remote control until FULL MODE appears on the OSD. This can only be done out of the service mode.
Page 8
66GF-64H barrel shape. • When the volume down button is pressed, side pincushion changes from pincushion to barrel shape. • Press the stand-by button on the remote control to store. Corner Symmetry Adjust the Corner Symmetry so that the picture is centred.
Page 9
66GF-64H Colour Adjustments To increase press volume-up button and to decrease press volume down button. The following adjustments should only be carried out when the CRT, IC801 or IC801 are replaced. RED CUT OFF alter «X» coordinate. GREEN CUT OFF alter «Y»...
Page 10
5. If another NVM value has to be changed, use the channel down button to select the page or position and repeat as necessary. Note: DO NOT change any NVM data, unless you have been advised to do so by a Sharp representative. If data is incorrectly changed, serious damage may occur to the receiver. Procedure to re-set the NVM: Modify the NVM values as in the below table.
66GF-64H DESCRIPTION OF SCHEMATIC DIAGRAM NOTE: SAFETY NOTE: 1. The unit of resistance «ohm»is omitted (K=1000 ohms. M= Megaohm). 1. DISCONNECT THE AC PLUG FROM THE AC 2. All resistors are 1/8 watt. unless otherwise noted. OUTLET BEFORE REPLACING PARTS.
66GF-64H PARTS LISTING REF No. PARTS DESCRIPTION * CODE Q 0209 VS2SC2412KQ-1 TRT 2SC2412 ROHM S AA REPLACEMENT PARTS Q 0210 VS2SC2412KQ-1 TRT 2SC2412 ROHM S AA Replacement parts which have special safety characteristics are identified Q 0302 VS2SC2412KQ-1 TRT 2SC2412 ROHM S AA in this manual.
Page 41
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE D 0415 RH-EX0547BMZZ ZENER DIODE TZMC6V2 TFK SMD S AA D 1009 RH-DX0551BMZZ DIODE LL4148 TFK SMD S AA D 0416 RH-EX0547BMZZ ZENER DIODE TZMC6V2 TFK SMD...
Page 42
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE C 0222 VCCCTV1HH220J CERAM C 22PF 50V 2125SMD S AA C 0375 VCCCTV1HH561J CERAM C 560PF 50V 2125SMD S AA C 0223 VCKYTV1HB333K CERAM C 33NF 50V 2125SMD...
Page 43
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE C 0818 VCEAGA1CW107M ELEC C 100UF 20% 16V S AA C 0601 RC-FZ0171BMZZ C MKP 15NF 1700V PHILIPS S AE C 0819 VCKYTV1HB102K CERAM C 1NF 50V 2125SMD...
Page 44
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE R 0245 VRS-TV1JD152J 2125 1.5KOHM 5% 1/10W SMD S AA R 0416 VRS-TV1JD223F 2125 22KOHM 1% 1/10W SMD S AA R 0246 VRS-TV1JD224J 2125 220KOHM 5% 1/10W SMD...
Page 45
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE R 0530 RR-XZ0212BMZZ FUS RES 10R TAP 5% 1/2W S AB R 0724 VRS-TQ2BD271J OX RE 270 OHM 5% 1/8W SMD S AA R 0532 VRS-TV1JD822J 2125 8,2KOHM 5% 1/10W SMD...
Page 46
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE R 1026 VRS-TV1JD221J 2125 220 OHM 5% 1/10W SMD S AA (SS) QPLGN0341CEZZ PLUG S AA R 1027 VRD-RA2BE103J RES 10KOHM 5% 1/8W S AA (ST) QPLGN0341CEZZ...
Page 47
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE JL 0015 QCNW-2736BMZZ WIRE 1 WAY S AF D 1706 RH-EX0409BMZZ ZENER DIODE BZX79C5V6 S AA D 1708 RH-DX0587BMZZ DIODE MR826 PREFORM C6.3 S AP L 0002...
Page 48
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE C 1356 RC-FZ4104BMNJ POL FILM C 100nF 50V 5% ECQ-V PANASONIC S AA R 1318 VRS-TV1JD103J 2125 10KOHM 5% 1/10W SMD S AA C 1357 RC-FZ4334BMNJ POL FILM C 330nF 50V 5% ECQ-V PANASONIC...
Page 49
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE C 5415 VCEAGA2CW226M ELEC C 22UF 20% 160V S AC Q 0903 VS2SA1037KQ-1 TRT BC807 SMD S AA Q 0904 VS2SC2412KQ-1 TRT 2SC2412 ROHM S AA C 5417 RC-FZ4222BMNJ...
Page 50
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE R 5433 VRS-TV1JD101J 2125 100 OHM 5% 1/10W SMD S AA J 0002 VRS-TV1JD000J 2125 0 OHM 5% 1/10W SMD S AA R 5434 VRS-TV1JD102J 2125 1KOHM 5% 1/10W SMD...
Page 51
66GF-64H REF No. PARTS DESCRIPTION * CODE REF No. PARTS DESCRIPTION * CODE R 6738 VRS-TV1JD101J 2125 100 OHM 5% 1/10W SMD S AA R 3301 VRS-TQ2BD221J OX RE 220 OHM 5% 1/8W SMD S AA R 6739 VRS-TV1JD101J 2125 100 OHM 5% 1/10W SMD...
66GF-64H 1.6 1.7 1.5 1.8 1.3 1.2 STEREO LED FLASHING CODES. If the TV set does not work and the stereo led is flashing, follow the sequence according to the information below, as a guide to fault finding. 1. Unable to read or write into NVM: 66% ON, 33% OFF twice and OFF for a second.